Just read the interview of Falko on LXer.com. He mentioned he started out with a RaQ2: Just wondering if anyone has installed ISPconfig on a Cobalt RaQ2?
That doesn't work because a RaQ2 has a RISC processor which is not i386 compatible, and ISPConfig currently comes with some precompiled binaries. In the next release ISPConfig will be compiled from the sources totally, then it could be possible to install it on a RaQ2. Do you still have a RaQ2? I still have mine, but I'm not using it anymore.
Falko, I have about about 8 RaQ2's. Do you have any information on getting a base linux install on one of these compatible with the Sparc so I would be able to install the new release when it comes out?
I think that's not possible because RaQs have a special BIOS that doesn't allow you to install another OS on the system...
To update my own question, I've found a How-to to install Debian 3.1 on a RaQ2: http://www.cyrius.com/debian/cobalt/sarge.html It worked great and I had a base install of Debian 3.1 and started using the ISPConfig How-to Falko wrote here: http://www.howtoforge.com/perfect_setup_debian_sarge However, I get to this point towards the end of the automated compile and get this error: Code: NOTE: the optional IO::Zlib module is not installed. The "sa-update" script requires this module to access compressed update archive files. REQUIRED module missing: Digest::SHA1 optional module missing: Net::DNS optional module missing: Mail::SPF::Query optional module missing: IP::Country optional module missing: Razor2 optional module missing: Net::Ident optional module missing: IO::Socket::INET6 optional module missing: IO::Socket::SSL optional module missing: Archive::Tar optional module missing: IO::Zlib warning: some functionality may not be available, please read the above report before continuing! ERROR: Could not configure SpamAssassin cd: could not get current directory: getcwd: cannot access parent directories: No such file or directory cd: could not get current directory: getcwd: cannot access parent directories: No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/aps.tar.gz': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/clamav.tar.gz': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/cronolog': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/cronosplit': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/zip': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/unzip': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory tar: spamassassin.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `spamassassin': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory tar: uudeview.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `uudeview': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory tar: clamav.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `clamav': No such file or directory job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory tar: aps.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory ./setup2: line 777: ispconfig_tmp/php/bin/php: No such file or directory ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here! job-working-directory: could not get current directory: getcwd: cannot access parent directories: No such file or directory The install process stops at this point. Is there anyway I can continue installation from where it left off?
You must install the Digest::SHA1 perl module and then start the ISPConfig installation from the beginning.
В чем проблема? Сталкнулся при установке со следующим: Code: NOTE: settings for "make test" are now controlled using "t/config.dist". See that file if you wish to customise what tests are run, and how. checking module dependencies and their versions... *************************************************************************** ERROR: the required Net::DNS (version 0.34) module is not installed. at lib/Mail/SpamAssassin/Util/DependencyInfo.pm line 294, <STDIN> line 1. Used for all DNS-based tests (SBL, XBL, SpamCop, DSBL, etc.), perform MX checks, and is also used when manually reporting spam to SpamCop. You need to make sure the Net::DNS version is sufficiently up-to-date: - version 0.34 or higher on Unix systems - version 0.46 or higher on Windows systems *************************************************************************** NOTE: the optional Mail::SPF module is not installed. Used to check DNS Sender Policy Framework (SPF) records to fight email address forgery and make it easier to identify spams. (This is preferred over Mail::SPF::Query.) *************************************************************************** NOTE: the optional Mail::SPF::Query module is installed, but is not an up-to-date version. Used to check DNS Sender Policy Framework (SPF) records to fight email address forgery and make it easier to identify spams. (Mail::SPF is preferred instead of this module.) *************************************************************************** NOTE: the optional IP::Country module is not installed. Used by the RelayCountry plugin (not enabled by default) to determine the domain country codes of each relay in the path of an email. *************************************************************************** NOTE: the optional Razor2 (version 2.61) module is installed, but is not an up-to-date version. Used to check message signatures against Vipul's Razor collaborative filtering network. Razor has a large number of dependencies on CPAN modules. Feel free to skip installing it, if this makes you nervous; SpamAssassin will still work well without it. More info on installing and using Razor can be found at http://wiki.apache.org/spamassassin/InstallingRazor . *************************************************************************** NOTE: the optional Net::Ident module is not installed. If you plan to use the --auth-ident option to spamd, you will need to install this module. *************************************************************************** NOTE: the optional IO::Socket::INET6 module is not installed. This is required if the first nameserver listed in your IP configuration or /etc/resolv.conf file is available only via an IPv6 address. *************************************************************************** NOTE: the optional IO::Socket::SSL module is not installed. If you wish to use SSL encryption to communicate between spamc and spamd (the --ssl option to spamd), you need to install this module. (You will need the OpenSSL libraries and use the ENABLE_SSL="yes" argument to Makefile.PL to build and run an SSL compatibile spamc.) *************************************************************************** NOTE: the optional Mail::DomainKeys module is not installed. If this module is installed, and you enable the DomainKeys plugin, SpamAssassin will perform Domain Key lookups when Domain Key information is present in the message headers. (Note that new versions of Mail::DKIM render this module superfluous.) *************************************************************************** NOTE: the optional Mail::DKIM module is not installed. If this module is installed, and you enable the DKIM plugin, SpamAssassin will perform DKIM lookups when a DKIM-Signature header is present in the message headers. (New versions of this module support both Domain Keys and DKIM, rendering Mail::DomainKeys obsolete.) *************************************************************************** NOTE: the optional DBI module is not installed. If you intend to use SpamAssassin with an SQL database backend for user configuration data, Bayes storage, or other storage, you will need to have these installed; both the basic DBI module and the driver for your database. *************************************************************************** NOTE: the optional Encode::Detect module is not installed. If you plan to use the normalize_charset config setting to detect charsets and convert them into Unicode, you will need to install this module. REQUIRED module missing: Net::DNS optional module missing: Mail::SPF optional module out of date: Mail::SPF::Query optional module missing: IP::Country optional module out of date: Razor2 optional module missing: Net::Ident optional module missing: IO::Socket::INET6 optional module missing: IO::Socket::SSL optional module missing: Mail::DomainKeys optional module missing: Mail::DKIM optional module missing: DBI optional module missing: Encode::Detect warning: some functionality may not be available, please read the above report before continuing! ERROR: Could not configure SpamAssassin cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/aps.tar.gz': No such file or directory mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory mv: cannot stat `binaries/clamav.tar.gz': No such file or directory mv: cannot stat `binaries/cronolog': No such file or directory mv: cannot stat `binaries/cronosplit': No such file or directory mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory mv: cannot stat `binaries/zip': No such file or directory mv: cannot stat `binaries/unzip': No such file or directory tar: spamassassin.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `spamassassin': No such file or directory tar: uudeview.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `uudeview': No such file or directory tar: clamav.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `clamav': No such file or directory tar: aps.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors ./setup2: line 873: ispconfig_tmp/php/bin/php: No such file or directory ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here! root@ns:~/install_ispconfig# Если возможно расскажите пожалуйста в деталях что мне надо установить что бы скрипт запустился. Заранее признателен за помощь. Думаю что данные модули нужны но как их именно проинсталить? Code: REQUIRED module missing: Net::DNS optional module missing: Mail::SPF optional module missing: Mail::SPF::Query optional module missing: IP::Country optional module missing: Razor2 optional module missing: Net::Ident optional module missing: IO::Socket::INET6 optional module missing: IO::Socket::SSL optional module missing: Mail::DomainKeys optional module missing: Mail::DKIM optional module missing: DBI optional module missing: Encode::Detect please be so kind to figure out what these errors are thanks in adavnce for your help - if you could give me your hand - just let me know through ICQ 4684079
Please run the following command to install all required perl modules: apt-get install libhtml-parser-perl libdb-file-lock-perl libnet-dns-perl
root@ns:~# apt-get install libhtml-parser-perl libdb-file-lock-perl libnet-dns-perl Code: Reading package lists... Done Building dependency tree... Done libhtml-parser-perl is already the newest version. libdb-file-lock-perl is already the newest version. libnet-dns-perl is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. some of the modules are installed, but anyway is says that those are out of system. And it is interrupted by errors. Could you look through the reason for the errors in the server - i will give you my login and password in private messages Be so kind ot help me - for as long as 2 days i can not manage the matter - keep on setting it up, but as result - there are always errors of modules' dependance. I do not know to whom address my quieries - therefore i earnestkly hope you to help me. I entrust you my server for monitoring and solving the problem of setting ISPConfig. first time as being set up - it war running ok with spconfig, but then by mistake i have deleted that and now fail to reset it. Shall be eternally thankful for your assistance
Please open the Perl shell: Code: perl -MCPAN -e shell and try to install Net:NS as follows: Code: install Net::DNS Afterwards, type q to leave the Perl shell.
