Hello, I'm using a vserver and followed the Virtual Users And Domains With Postfix, Courier And MySQL (Debian Etch) Guide. That worked fine for over nine months. Since a few days I've got the following log entries when a smtp connection is established to the server: Code: Jan 20 22:26:23 h1276728 postfix/master[29940]: warning: process /usr/lib/postfix/smtpd pid 29947 killed by signal 11 Jan 20 22:26:23 h1276728 postfix/master[29940]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling The server doesn't response with a 220. The telnet window is just empty I checked the memory of the server with memtest while it was booted with a recovery linux provided by my server hoster. All tests passed. Here are my postfix config files: main.cf Code: # # general # myhostname = mail.cuimat.net mydomain = cuimat.net myorigin = $mydomain mydestination = mail.cuimat.net, localhost, localhost.localdomain mynetworks = 127.0.0.0/8 relay_domains = mailbox_transport = cyrus virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf #sender_canonical_maps = mysql:/etc/postfix/mysql-canonical.cf alias_maps = $alias_database # # sasl auth # for clients # smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_delay_reject = yes smtpd_helo_required = yes disable_vrfy_command = yes strict_rfc821_envelopes = yes smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_non_fqdn_sender, reject_unknown_sender_domain, permit smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_data_restrictions = reject_unauth_pipelining, permit # # SASL TLS # for server # smtp_use_tls = yes # # SASL TLS # for clients # smtpd_use_tls = yes smtpd_sasl_local_domain = smtpd_sasl_auth_only = yes smtpd_tls_note_starttls_offer = yes smtpd_tls_cert_file = /etc/ssl/certs/cuimat-net/cert/mailcuimatnet.pem smtpd_tls_key_file = /etc/ssl/certs/cuimat-net/key/mailcuimatnet.key smtpd_tls_CAfile = /etc/ssl/certs/cuimat-net/ca_cert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom virtual_alias_domains = virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf virtual_create_maildirsize = yes virtual_mailbox_extended = yes virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf virtual_mailbox_limit_override = yes virtual_maildir_limit_message = "The user you are trying to reach is over quota." virtual_overquota_bounce = yes proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps content_filter = amavis:[127.0.0.1]:10024 receive_override_options = no_address_mappings and here the master.cf Code: # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #submission inet n - - - - smtpd # -o smtpd_enforce_tls=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject smtps inet n - - - - smtpd -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject amavis unix - - - - 2 smtp #amavis deaktiviert wegen mail problemen -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - - - - smtpd #amavís deaktiviert wegen mail problemem -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks -o smtpd_bind_address=127.0.0.1 #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} # #cyrus unix - n n - - pipe # flags= user=cyrus argv=/usr/sbin/cyrdeliver -r ${sender} -m ${extension} ${user} Any ideas whats going wrong? I know everybody says that, but i didn't change the config*g*
Hey here is the result of df -h Code: h1276728:/# df -h Filesystem Size Used Avail Use% Mounted on /dev/vzfs 10G 2.6G 7.5G 26% / tmpfs 1007M 0 1007M 0% /lib/init/rw tmpfs 1007M 4.0K 1007M 1% /dev/shm h1276728:/# mail.warn Code: Jan 21 19:15:04 h1276728 postfix/master[29940]: warning: process /usr/lib/postfix/smtpd pid 26543 killed by signal 11 Jan 21 19:15:04 h1276728 postfix/master[29940]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling mail.info Code: Jan 21 19:15:04 h1276728 postfix/master[29940]: warning: process /usr/lib/postfix/smtpd pid 26543 killed by signal 11 Jan 21 19:15:04 h1276728 postfix/master[29940]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling mail.err has just old entries. Syslog looks like mail.log
Im having a similar issue Hi, Newbie here, followed the Perfect Server and Virtual Domain setup to the letter (almost). I can Code: telnet localhost 110 and get the response Code: root@aladdin:~# telnet localhost 110 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Hello there. but when i do Code: telnet localhost 25 i get this Code: root@aladdin:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Now, i checked to make sure the response worked in between setting up Perfect Server Ubuntu 7.10 and Virtual Users and Domains Postfix.... and all worked fine. But when i got to saslauthd stuff, i think thats when it went pear shaped. here is my main.cf Code: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h # TLS parameters smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = aladdin.glemsfordschool.local alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = aladdin.glemsfordschool.local, localhost, localhost.localdomain, aladdin.glemsfordschool.co.uk relayhost = mynetworks = 127.0.0.1/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all smtpd_sasl_local_domain = smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination smtpd_tls_auth_only = no smtp_use_tls = yes smtp_tls_note_starttls_offer = yes smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandomvirtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf virtual_create_maildirsize = yes virtual_mailbox_extended = yes virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf virtual_mailbox_limit_override = yes virtual_mailbox_limit_message = "The user you are trying to reach is over quota." virtual_overquota_bounce = yes proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps content_filter = amavis:[127.0.0.1]:10024 receive_override_options = no_address_mappings and master.cf Code: # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #submission inet n - - - - smtpd # -o smtpd_enforce_tls=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} amavis unix - - - - 2 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - - - - smtpd -o content_filter= -o local_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions= -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks -o smtpd_bind_address=127.0.0.1 Any help would be appreciated, i work for a school and we are using this ubuntu box as a intranet server and as a primary mail filter for our Exchange Server Kind Regards James
hi, netstat -tap Code: h1276728:/# netstat -tap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 mail.cuimat.net:domain *:* LISTEN 21620/named tcp 0 0 mail.cuimat.net:domain *:* LISTEN 21620/named tcp 0 0 *:ssh *:* LISTEN 11909/sshd tcp 0 0 *:smtp *:* LISTEN 29903/master tcp 0 0 mail.cuimat.net:953 *:* LISTEN 21620/named tcp 0 0 mail.cuimat.net:https *:* LISTEN 21678/apache2 tcp 0 0 *:imaps *:* LISTEN 11738/couriertcpd tcp 0 0 mail.cuimat.net:10024 *:* LISTEN 28375/amavisd (mast tcp 0 0 mail.cuimat.net:10025 *:* LISTEN 29903/master tcp 0 0 mail.cuimat.net:mysql *:* LISTEN 11550/mysqld tcp 0 0 *:finger *:* LISTEN 11791/inetd tcp 0 0 *:imap2 *:* LISTEN 11726/couriertcpd tcp 0 0 *:www *:* LISTEN 21678/apache2 tcp 0 0 *:ssmtp *:* LISTEN 29903/master tcp 0 0 *:auth *:* LISTEN 11791/inetd tcp 0 1816 mail.cuimat.net:ssh d030202.adsl.hanse:1554 ESTABLISHED28321/sshd: channap I followed the howto again on a fresh System at home. The machine works fine, i imported the vservers mail database. I'm using it as a backup mx at the monent, so i dont lose any mail. So if you want to make so compairisons just tell me. I compared the system to my vserver, but i didn't find any differences except of the passwords. thanks
I think the problem is that amavisd and Psotfix are listening on mail.cuimat.net instead of localhost... What's in /etc/hosts?
Hey, my etc/hosts Code: h1276728:/# cat /etc/hosts 127.0.0.1 mail.cuimat.net mail h1276728.stratoserver.net h1276728 localhost localhost.localdomain # The following lines are desirable for IPv6 capable hosts # (added automatically by netbase upgrade) ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts I compaired that to my home mailserver and it got the following /etc/hosts/ Code: cuimat-mail2:~# cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 cuimat-mail2.dyndns.org cuimat-mail2 # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts After i changed my vserver netstat looks right but its still not working Code: h1276728:/home/channappel# cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 mail.cuimat.net mail h1276728.stratoserver.net h1276728 # The following lines are desirable for IPv6 capable hosts # (added automatically by netbase upgrade) ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts here the new netstat -tap Code: h1276728:/home/channappel# netstat -tap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 mail.cuimat.net:domain *:* LISTEN 5654/named tcp 0 0 localhost:domain *:* LISTEN 5654/named tcp 0 0 *:ssh *:* LISTEN 6093/sshd tcp 0 0 *:smtp *:* LISTEN 6059/master tcp 0 0 localhost:953 *:* LISTEN 5654/named tcp 0 0 mail.cuimat.net:https *:* LISTEN 7217/apache2 tcp 0 0 *:imaps *:* LISTEN 5934/couriertcpd tcp 0 0 *:pop3s *:* LISTEN 5953/couriertcpd tcp 0 0 localhost:10024 *:* LISTEN 5693/amavisd (maste tcp 0 0 localhost:10025 *:* LISTEN 6059/master tcp 0 0 localhost:mysql *:* LISTEN 5755/mysqld tcp 0 0 *:pop3 *:* LISTEN 5939/couriertcpd tcp 0 0 *:finger *:* LISTEN 5982/inetd tcp 0 0 *:imap2 *:* LISTEN 5922/couriertcpd tcp 0 0 *:www *:* LISTEN 7217/apache2 tcp 0 0 *:ssmtp *:* LISTEN 6059/master tcp 0 0 *:auth *:* LISTEN 5982/inetd tcp 0 0 mail.cuimat.net:ssh pool-68-163-175-1:57886 TIME_WAIT - tcp 0 0 mail.cuimat.net:ssh pool-68-163-175-1:57689 TIME_WAIT - tcp 0 2076 mail.cuimat.net:ssh d030202.adsl.hanse:1438 ESTABLISHED7550/sshd: channapp tcp 21 0 mail.cuimat.net:smtp d030202.adsl.hanse:1440 ESTABLISHED- tcp 0 0 mail.cuimat.net:ssh pool-68-163-175-1:57985 TIME_WAIT - tcp 0 0 mail.cuimat.net:ssh pool-68-163-175-1:57012 TIME_WAIT - tcp 0 704 mail.cuimat.net:ssh pool-68-163-175-1:58290 ESTABLISHED7827/sshd: [accepte i'm still getting the same logs
Code: ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:20 errors:0 dropped:0 overruns:0 frame:0 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1738 (1.6 KiB) TX bytes:1738 (1.6 KiB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:28872 errors:0 dropped:0 overruns:0 frame:0 TX packets:29947 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6750339 (6.4 MiB) TX bytes:8756533 (8.3 MiB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:81.169.140.243 P-t-P:81.169.140.243 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 Shouldn't my interfaces have a mac address? Or is that normal on a vserver? I'm just familiar with VMWare ESX and there every VM has got it's own MAC.
Try this in /etc/hosts: Code: 127.0.0.1 localhost localhost.localdomain 81.169.140.243 mail.cuimat.net mail h1276728.stratoserver.net h1276728 # The following lines are desirable for IPv6 capable hosts # (added automatically by netbase upgrade) ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts It depends on the virtualization technique. I'm not sure which one Strato is using...
i changed my hosts, but the issue is still there. Netstat -tap Code: Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 mail.cuimat.net:domain *:* LISTEN 13978/named tcp 0 0 localhost:domain *:* LISTEN 13978/named tcp 0 0 *:ssh *:* LISTEN 15444/sshd tcp 0 0 *:smtp *:* LISTEN 16242/master tcp 0 0 localhost:953 *:* LISTEN 13978/named tcp 0 0 mail.cuimat.net:https *:* LISTEN 16292/apache2 tcp 0 0 *:imaps *:* LISTEN 14264/couriertcpd tcp 0 0 *:pop3s *:* LISTEN 14283/couriertcpd tcp 0 0 localhost:10024 *:* LISTEN 14017/amavisd (mast tcp 0 0 localhost:10025 *:* LISTEN 16242/master tcp 0 0 localhost:mysql *:* LISTEN 14079/mysqld tcp 0 0 *:pop3 *:* LISTEN 14269/couriertcpd tcp 0 0 *:finger *:* LISTEN 14308/inetd tcp 0 0 *:imap2 *:* LISTEN 14247/couriertcpd tcp 0 0 *:www *:* LISTEN 16292/apache2 tcp 0 0 *:ssmtp *:* LISTEN 16242/master tcp 0 0 *:auth *:* LISTEN 14308/inetd tcp 21 0 mail.cuimat.net:smtp c226212.adsl.h:ms-sql-m ESTABLISHED- tcp 0 0 mail.cuimat.net:imap2 c226212.adsl.hanse:1432 ESTABLISHED17597/couriertls I've deleted the two comments in my master.cf which where after amavis and 127.0.0.1:10024, because since today i had a log entry about amavis and that it couldnt read the cfg. But SMTP still doesnt work. The internal mailtraffic from the root user and system messages works.
Hi Still the same. Mail.log Code: Feb 12 19:41:33 h1276728 postfix/master[3620]: daemon started -- version 2.3.8, configuration /etc/postfix Feb 12 19:43:48 h1276728 postfix/master[3620]: warning: process /usr/lib/postfix/smtpd pid 5127 killed by signal 11 Feb 12 19:43:48 h1276728 postfix/master[3620]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling The otherlogs show nothing new.
I solved the problem with reinstalling the whole postfix service. I think there went something wrong with the quota patch after an aptitude upgrade. So i didn't apply the quota patch this time. Thread can be closed.