Greetings, First, I'm an utter novice. I have a FC6 system running on a HP dc7700p PC (4 GB RAM, 2 250GB HDD's, Intel Core 2 Duo [Intel Q965 Express Chipset], at 2.13 GHz, Gigabit ethernet, ATI Radeon X1600XT video card). After installation of the LAMP server according to the How-to (omitting the ISPConfig, BIND database, and mail server), I noticed a big slow-down in my remote connection (but from within the LAN) to the system via a SSH client. Also the Apache web server was VERY slow to serve pages from this system to my office PC (within the LAN). Any suggestions as to how I can go about diagnosing and resolving this problem? AdvTHANKSance, --Clay
dmesg dump Yes. Here is the dmesg dump. I seem to now have broken httpd as it will not start - I will attempt to reconfig. Still the connection time with SSH is very slow. It does appear from the /var/log/secure log that SSH does a reverse DNS lookup. I understand this can slow things down. The Apache server may be doing the same thing. In either case I am unsure how to turn reverse lookup off. Here is the dump: ============================== Linux version 2.6.22.9-61.fc6 ([email protected]) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Thu Sep 27 18:48:03 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dffb1d00 (usable) BIOS-e820: 00000000dffb1d00 - 00000000e0000000 (reserved) BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved) BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000011c000000 (usable) Warning only 4GB will be used. Use a PAE enabled kernel. 3200MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f9bf0 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 1048576) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 1048576 early_node_map[1] active PFN ranges 0: 0 -> 1048576 On node 0 totalpages: 1048576 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 6400 pages used for memmap HighMem zone: 812800 pages, LIFO batch:31 DMI 2.4 present. Using APIC driver default ACPI: RSDP 000E7610, 0014 (r0 COMPAQ) ACPI: RSDT DFFC3D40, 0040 (r1 HPQOEM SLIC-BPC 20070206 0) ACPI: FACP DFFC3DE8, 0074 (r1 COMPAQ BROADH2O 1 0) ACPI: DSDT DFFC4143, 9A2A (r1 COMPAQ DSDT_PRJ 1 MSFT 100000E) ACPI: FACS DFFC3D00, 0040 ACPI: APIC DFFC3E5C, 0068 (r1 COMPAQ BROADH2O 1 0) ACPI: ASF! DFFC3EC4, 0063 (r32 COMPAQ BROADH2O 1 0) ACPI: MCFG DFFC3F27, 003C (r1 COMPAQ BROADH2O 1 0) ACPI: TCPA DFFC3F63, 0032 (r1 COMPAQ BROADH2O 1 0) ACPI: SLIC DFFC3F95, 0176 (r1 HPQOEM SLIC-BPC 1 0) ACPI: HPET DFFC410B, 0038 (r1 COMPAQ BROADH2O 1 0) ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e2000000 (gap: e0000000:14000000) Built 1 zonelists. Total pages: 1040384 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07cd000 soft=c07ad000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2128.097 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3627924k/4194304k available (2250k kernel code, 40576k reserved, 1202k data, 268k init, 2752196k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0765000 - 0xc07a8000 ( 268 kB) .data : 0xc0632b60 - 0xc075f584 (1202 kB) .text : 0xc0400000 - 0xc0632b60 (2250 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 4258.46 BogoMIPS (lpj=2129231) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c07ce000 soft=c07ae000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4255.99 BogoMIPS (lpj=2127999) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02 Total of 2 processors activated (8514.46 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1536 bytes HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. Time: 16:06:42 Date: 11/20/107 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xeafb8, last bus=32 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region fa00-fa3f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
dmseg dump part 2 part 2 ===================================== Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 17 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:0e: ioport range 0x400-0x41f has been reserved pnp: 00:0e: ioport range 0x420-0x43f has been reserved pnp: 00:0e: ioport range 0x440-0x45f has been reserved pnp: 00:0e: ioport range 0x460-0x47f has been reserved pnp: 00:0e: ioport range 0x480-0x48f has been reserved pnp: 00:0e: ioport range 0xf800-0xf81f has been reserved pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved pnp: 00:0e: ioport range 0xf840-0xf85f has been reserved pnp: 00:0f: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved pnp: 00:10: iomem range 0x100000-0xdfffffff could not be reserved pnp: 00:10: iomem range 0xe4000-0xfffff could not be reserved pnp: 00:10: iomem range 0xfec01000-0xfecfffff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: 1000-1fff MEM window: f0500000-f07fffff PREFETCH window: e0000000-f01fffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2276k freed apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1198166802.417:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 4F4E2A6A996AC8BB - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0cie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0cie00] Allocate Port Service[0000:00:1c.0cie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: SSDT DFFCE68A, 0320 (r1 COMPAQ CPU_TM2 1 MSFT 100000E) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:03.3 -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS1 at I/O 0x2220 (irq = 17) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: ST3250824AS, ATA DISK drive hdb: ST3250824AS, ATA DISK drive Probing IDE interface ide1... hdc: HL-DT-STDVD+-RW GSA-H31L, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 hda: cache flushes supported hda: hda1 hda2 hdb: max request size: 512KiB hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 hdb: cache flushes supported hdb: hdb1 ide-floppy driver 0.99.newide PNP: PS/2 Controller [PNP0303:KBD,PNP0f0eS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 3:302:136 hash matches device 0000:00:03.2 Freeing unused kernel memory: 268k freed Write protecting the kernel read-only data: 925k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 18, io base 0x00002120 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 19, io base 0x00002140 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002160 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002180 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf0426000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 4 ports detected usb 3-2: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 18, io mem 0xf0426400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:1f.2: version 2.11 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 18 (level, low) -> IRQ 21 ata_piix 0000:00:1f.2: 0x1F0 IDE port busy -- conflict with ide0 ata_piix 0000:00:1f.2: 0x170 IDE port busy -- conflict with ide1 ata_piix 0000:00:1f.2: no available legacy port device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected] usb 6-2: new high speed USB device using ehci_hcd and address 2 usb 6-2: configuration #1 chosen from 1 choice usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: Logitech Logitech USB Optical Mouse as /class/input/input1 input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.1-1 usb 4-2: new low speed USB device using uhci_hcd and address 3 usb 4-2: configuration #1 chosen from 1 choice input: CHICONY HP Basic USB Keyboard as /class/input/input2 input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.1-2
dmesg dump part 3 part 3 ==================== SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1198166808.244:2): selinux=0 auid=4294967295 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0xf860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) tpm_inf_pnp 00:0b: Found TPM with ID IFX0102 tpm_inf_pnp 00:0b: TPM found: config base 0x4e, data base 0xcb0, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3272 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 3391 MBytes. [fglrx] USWC is disabled in module parameters [fglrx] PAT is disabled! [fglrx] module loaded - fglrx 8.39.4 [Jul 20 2007] on minor 0 hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0 -> GSI 19 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:0f:fe:7e:12:c7 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1b.0 to 64 FDC 0 is a post-1991 82077 lp0: using parport0 (interrupt-driven). lp0: console ready sonypi: Sony Programmable I/O Controller Driver v1.26. No dock devices found. input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PBTN] md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available Adding 12582904k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:12582904k e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 ip6_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team i2c /dev entries driver eth0: no IPv6 routers present [fglrx] PCIe has already been initialized. Reinitializing ... [fglrx] total GART = 130023424 [fglrx] free GART = 114032640 [fglrx] max single GART = 114032640 [fglrx] total LFB = 268304384 [fglrx] free LFB = 244305920 [fglrx] max single LFB = 244305920 [fglrx] total Inv = 0 [fglrx] free Inv = 0 [fglrx] max single Inv = 0 [fglrx] total TIM = 0 e1000: eth0: e1000_watchdog: NIC Link is Down e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO e1000: eth0: e1000_watchdog: NIC Link is Down e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
Can you post the exact message? What's in /etc/hosts and /etc/resolv.conf? What's the output of Code: hostname and Code: hostname -f ?
The results of both hostname and hostname -f are Code: gnlewis.ic.edu which is the hostname of my system. Here is the contents of /etc/hosts: Here is the contents of /etc/hosts.resolv Here is a bit of the secure logfile (showing sshd activity). What's up with the error on port 22 "can't bind port 22 address already in use"?
