problem with shared ip page I have hunted through your forums and have not found a solution to this. I have ispconfig installed in VMware on an XP box. When I set up a site in the control panel and try to navigate to the page I get a shared ip page. Here are both outputs. I have also run httpd -t and it says syntax okay. This is driving me nuts. Your help is appreciated. Vhost NameVirtualHost 192.168.2.15:80 <VirtualHost 192.168.2.15:80> ServerName localhost ServerAdmin root@localhost DocumentRoot /var/www/sharedip </VirtualHost> NameVirtualHost 192.168.2.5:80 <VirtualHost 192.168.2.5:80> ServerName localhost ServerAdmin root@localhost DocumentRoot /var/www/sharedip </VirtualHost> NameVirtualHost 192.168.2.7:80 <VirtualHost 192.168.2.7:80> ServerName localhost ServerAdmin root@localhost DocumentRoot /var/www/sharedip </VirtualHost> NameVirtualHost 192.168.2.8:80 <VirtualHost 192.168.2.8:80> ServerName localhost ServerAdmin root@localhost DocumentRoot /var/www/sharedip </VirtualHost> NameVirtualHost 192.168.2.9:80 <VirtualHost 192.168.2.9:80> ServerName localhost ServerAdmin root@localhost DocumentRoot /var/www/sharedip </VirtualHost> # # ###################################### # Vhost: www.sanctity-mu.net:80 ###################################### # # <VirtualHost 192.168.2.7:80> ServerName www.sanctity-mu.net:80 ServerAdmin [email protected] DocumentRoot /var/www/web1/web ServerAlias sanctity-mu.net DirectoryIndex index.html index.htm index.php index.php5 index.php4 index.php3 index.shtml index.cgi index.pl index.jsp Default.htm default.htm Alias /cgi-bin/ /var/www/web1/cgi-bin/ AddHandler cgi-script .cgi AddHandler cgi-script .pl ErrorLog /var/www/web1/log/error.log AddType application/x-httpd-php .php .php3 .php4 .php5 <Files *.php> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php3> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php4> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php5> SetOutputFilter PHP SetInputFilter PHP </Files> php_admin_flag safe_mode Off <IfModule mod_ruby.c> <Directory /var/www/web1/web> Options +ExecCGI </Directory> RubyRequire apache/ruby-run #RubySafeLevel 0 <Files *.rb> SetHandler ruby-object RubyHandler Apache::RubyRun.instance </Files> </IfModule> AddType text/html .shtml AddOutputFilter INCLUDES .shtml AddType application/vnd.wap.wmlscriptc .wmlsc .wsc AddType text/vnd.wap.wml .wml AddType text/vnd.wap.wmlscript .ws .wmlscript AddType image/vnd.wap.wbmp .wbmp Alias /error/ "/var/www/web1/web/error/" ErrorDocument 400 /error/invalidSyntax.html ErrorDocument 401 /error/authorizationRequired.html ErrorDocument 403 /error/forbidden.html ErrorDocument 404 /error/fileNotFound.html ErrorDocument 405 /error/methodNotAllowed.html ErrorDocument 500 /error/internalServerError.html ErrorDocument 503 /error/overloaded.html AliasMatch ^/~([^/]+)(/(.*))? /var/www/web1/user/$1/web/$3 AliasMatch ^/users/([^/]+)(/(.*))? /var/www/web1/user/$1/web/$3 </VirtualHost> # ifconfig eth0 Link encap:Ethernet HWaddr 00:0C:29:09:33:80 inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe09:3380/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9803 errors:0 dropped:0 overruns:0 frame:0 TX packets:6738 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2426011 (2.3 MiB) TX bytes:1392111 (1.3 MiB) Interrupt:169 Base address:0x2000 eth0:2 Link encap:Ethernet HWaddr 00:0C:29:09:33:80 inet addr:192.168.2.7 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:169 Base address:0x2000 eth0:3 Link encap:Ethernet HWaddr 00:0C:29:09:33:80 inet addr:192.168.2.8 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:169 Base address:0x2000 eth0:4 Link encap:Ethernet HWaddr 00:0C:29:09:33:80 inet addr:192.168.2.9 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:169 Base address:0x2000 eth0:5 Link encap:Ethernet HWaddr 00:0C:29:09:33:80 inet addr:192.168.2.15 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:169 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1620 errors:0 dropped:0 overruns:0 frame:0 TX packets:1620 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:147332 (143.8 KiB) TX bytes:147332 (143.8 KiB)
What do you exactly mean by "navigate to the page"?`Do you just enter the IP adress? If so that won't work. You have to set an entry in your hosts file, so that you browser is able to look up the DNS-Name to the local IP.... you may find your hosts file on your windows machine at %WINDIR%\SYSMTEM32\drivers\etc\hosts
problem with shared ip I know how to set my hosts file on my xp machine but the website i set up for the second ip, the one at 192.168.2.7, can not be seen from the web. When anyone tries to view the page they see shared ip page and not the default ISPconfig page. you can check this by going to http://sanctity-mu.net Also I would like to add that this site's DNS is handled at godaddy not on my own server. So to further explain my server is hosted on 192.168.2.5. I have an IRCD running on 192.168.2.15 I would like to use 192.168.2.7, 192.168.2.8 and 192.168.2.9 for web pages let me also add that I can connect to the site with ftp, and ssh via ip address or domain name
Did you forward port 80 from your router to 192.168.2.7? BTW, you can forward port 80 to only one internal IP address, so you cannot host web sites on 192.168.2.7, 192.168.2.8, and 192.168.2.9 at the same time.
shared ip page I have the firewall turned off in my router and no firewall on my xp or my linux configuration.
