Hi. My first post at this forum! I have installed ispconfig at my server with debian 4.0 (the perfect setup guide). I have also installed suphp (with the suphp guide). My problem is that i cant get php to work. I have triend in hours now, but I cant get it work When i make a phpinfo.php file and try it in my browser it just show <? phpinfo(); ?> If i try with with any other php files it look like this for example: <?php /* $Id: index.php,v 1.1 2003/06/11 17:37:59 hpdl Exp $ and so on. Please help
Did you enable PHP for that site? It's under ISP manager > the-site-you-created > Basis. You will see an option "PHP Scripts", that you need to enable
I`ve also tried to make suphp work with debian etch. It seems quite impossible when following the guides at howtoforge... The closest I came was to get a error 500 (uid error). I even tried to set the minimum uid down to 1 instead of 100 (default), without any results.
SuPHP works fine for me with the guides from howtoforge. If you dont post exactly what you did, we will not be able to help you. Please make a new thread for this.
Im giving it another shot today. Note that I am not using debian sarge, like in the howto`s, but debian etch. I`ll report later, how it went. This is my third attempt from a clean ISPconfig install. About the vhost config, everything looked okay. The suphp insertion worked like it should, but it resulted in a 500 min_uid error. One other thing, when I did the guide, I ended up with two suphp.conf files. One in /etc/, and one in /etc/suphp/.. Is that normal? What is the correct conf file?
The howtos are available for debian etch too. please have a look at the ispconfig documentation page and compare your setup with the correct howto for debian etch.
Did the reinstall and ended up with the same irritating 500 errorpage. Here is my vhost file : This is the guide i followed in this case : http://www.howtoforge.com/install-s...tions-for-use-with-ispconfig-2.2.20-and-above Here is my suphp.conf :
Everytime i reload the page, the following message is recorded in /var/log/suphp.log Where are the log files for the specific site stored?
Hi again, I identified the error, and now everything is working as it should. The clue was located in the vhost file. I admit it was kind of a newbie error by myself, but this is my first attempt with suphp - and the guides did not mention that the ISPconfig site has to have a webx_user for suphp to function properly. I was aware that suphp is "user priveleges" in origin, so I take the blame for this one... In the vhost file, apache runs with user : nobody, and group webx if a user has not been created. The solution was to create a user in ISPconfig under the specific site, make him admin, make sure that every file in the web catalogue is owned by the new user - and voila - the pesky 500 error is no more! Im quite relieved...
To be more specific : "nobody" is what results in the 500 error, if you haven`t created a webuser inside ISPconfig. This should be added in the suphp/ispconfig guides.
I have now reinstalled the hole debian etch + ispconfig, and i cant not get php working. What shell I do? What files are you want to see. I will give my left hand to get it works Almost EDIT: If i uncomment the 2 strings in /etc/apache2/mods-enabled/php5.conf" Its working. But if they are uncomment i think i not could change if php should be on in ispconfig for every user. right? What could be wrong? Help fast!!!
Right. What's the output of Code: ls -la /etc/apache2/vhosts ? Any errors in the web site's error log when you switch on PHP?
same to me ... :-( hi Fellows .... i have also the problem that i could not bring PHP to work on my pages with the regular function to configure the web in ispConfig. PHP only works when i put a line into the apache-directives-box saying Code: AddHandler application/x-httpd-php .php any idea what did wrong. I am running on opensuse 10.3 thanks - ralf
Unable to configure php on a per site basis Hi there all, I have the exact same problem, the only time php works is when I uncoment the following lines, and this implies global php to all sites AddHandler php5-script .php AddType text/html .php there is probably something fundamantal we are all missing, I have added all the Vhost_config.conf,phpd.conf and httpd.conf files on another post in this forum. at http://www.howtoforge.com/forums/showthread.php?t=21169 also just to provide more detail this is the procedures I follwoed when making the site - I logged in as admin, then created a client - I then created a site associated with this client -I then created a user (site administrator) - I then used ftp (loged in as this new site administrator) and copied my test php file which is a simple helow world caled index.php I then launched my site using http://localhost/<my new site name>/web/index.php and presto it just prints out uninterpreted php code nothing works : ( Really hoping for an answer or some debugging tips for this issue cheers
This is totally wrong. If your web site is www.example.com. then you must type in http://www.example.com/index.php in your browser, not http://localhost/www.example.com/web/index.php
