Howto Suse 10 x86_64 and ISPConfig

Discussion in 'Tips/Tricks/Mods' started by SeaWolf, Dec 11, 2005.

  1. SeaWolf

    SeaWolf Member

    Hi!

    Since I had some troubles to install ISP on my 64bit server with Suse 10, here is a howto to help you ;)

    ~~~~~~~~~~~~~~~~~~~~ STEP 1 ~~~~~~~~~~~~~~~~~~~~
    Install Suse 10 (perfect setup)

    ~~~~~~~~~~~~~~~~~~~~ STEP 2 ~~~~~~~~~~~~~~~~~~~~
    yast2 -i openssl-devel-32bit

    ~~~~~~~~~~~~~~~~~~~~ STEP 3 ~~~~~~~~~~~~~~~~~~~~
    mkdir /usr/local/lib/mysql
    cd /usr/local/lib/mysql
    ln -s /usr/include/mysql include
    ln -s /usr/lib64/mysql lib
    cd /tmp

    ~~~~~~~~~~~~~~~~~~~~ STEP 4 ~~~~~~~~~~~~~~~~~~~~
    wget http://easynews.dl.sourceforge.net/sourceforge/ispconfig/ISPConfig-2.1.1.tar.gz
    tar xvfz ISPConfig*.tar.gz
    cd install_ispconfig

    ~~~~~~~~~~~~~~~~~~~~ STEP 5 ~~~~~~~~~~~~~~~~~~~~
    vi compile_aps/compile
    Change line 85 to:
    ./configure --with-apxs=${INSTALL_ROOT}/httpd/bin/apxs --enable-track-vars --enable-sockets --with-config-file-path=${INSTALL_ROOT}/php --enable-ftp --prefix=${INSTALL_ROOT}/php --with-openssl --with-mysql=/usr/local/lib/mysql --disable-libxml --with-zlib-dir=/usr/lib64 || error "Could not configure PHP"

    ~~~~~~~~~~~~~~~~~~~~ STEP 6 ~~~~~~~~~~~~~~~~~~~~
    Install ISPConfig (./setup)

    ~~~~~~~~~~~~~~~~~~~~ STEP 7 ~~~~~~~~~~~~~~~~~~~~
    Install Webmail (option)
    With "update" function
    choose URL and enter: http://www.ispconfig.org/downloads/webmail.pkg

    If you already tried and doesn't work try this before:
    rm -rf /home/admispconfig/ispconfig/web/tools/tools/webmail
    rm -rf /home/admispconfig/ispconfig/web/webmail
    rm -rf /home/admispconfig/ispconfig/temp/webmail

    ~~~~~~~~~~~~~~~~~~~~ STEP 8 ~~~~~~~~~~~~~~~~~~~~
    Install phpMyAdmin (option)
    With "update" function
    choose URL and enter: http://www.ispconfig.org/downloads/phpmyadmin-2.6.4-pl3.pkg


    On my server, ispconfig, imap and pop3 was not started automatically when computer boot so I just do these commands:
    chkconfig --add ispconfig_server
    chkconfig --add courier-authdaemon
    chkconfig --add courier-imap
    chkconfig --add courier-imap-ssl
    chkconfig --add courier-pop
    chkconfig --add courier-pop-ssl

    you can start them manually right after that if you don't want to reboot.
    /etc/init.d/ispconfig_server start
    etc...


    Hope will help some of you ;) That's all the step I've done and it works (with https) :)

    Thanks to falko, till and some of you :cool:


    SeaWolf
     
  2. beholder

    beholder New Member

    ISPconfig install failure - OpenSUSE 10

    Following posted instruction on installation of ISPconfig on OpenSUSE 10 X86_64, my installation fails and gives me the following information about the failure:

    /usr/lib64/gcc/x86_64-suse-linux/4.0.2/../../../../x86_64-suse-linux/bin/ld: /usr/local/lib/libz.a(gzio.o): relocation R_X86_64_32S against `a local symbol' can not be used when making a shared object; recompile with -fPIC
    /usr/local/lib/libz.a: could not read symbols: Bad value
    collect2: ld returned 1 exit status
    make[2]: *** [libclamav.la] Error 1
    make[2]: Leaving directory `/tmp/install_ispconfig/compile_aps/clamav-0.87.1/libclamav'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/tmp/install_ispconfig/compile_aps/clamav-0.87.1'
    make: *** [all] Error 2
    ERROR: Could not make ClamAV
    cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
    mv: cannot stat `binaries/aps.tar.gz': No such file or directory
    mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
    mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
    mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
    mv: cannot stat `binaries/cronolog': No such file or directory
    mv: cannot stat `binaries/cronosplit': No such file or directory
    mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
    mv: cannot stat `binaries/zip': No such file or directory
    mv: cannot stat `binaries/unzip': No such file or directory
    tar: spamassassin.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `spamassassin': No such file or directory
    tar: uudeview.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `uudeview': No such file or directory
    tar: clamav.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    mv: cannot stat `clamav': No such file or directory
    tar: aps.tar.gz: Cannot open: No such file or directory
    tar: Error is not recoverable: exiting now
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    ./setup2: line 771: ispconfig_tmp/php/bin/php: No such file or directory

    Since I am a bit of a novice please make any helpful information a detailed as possible.

    Thank you in advance for you assistance.
     
  3. SeaWolf

    SeaWolf Member

    Could you tell me the specs of your system?

    Did you install Suse 10 perfect setup?

    SeaWolf
     
  4. falko

    falko Super Moderator Howtoforge Staff

  5. beholder

    beholder New Member

    Yes Seawolf, I did use the Suse 10 (perfect setup). I also followed your suggestions and still have the failure listed above. I've tried every suggestion in this forum. Unless something new is listed I may be out of luck.

    I am running Suse 10 x86_64 on a Dell PowerEdge SC1426 Xeon 64 bit server. Any help you can provide will be greatly appreciated.
     
  6. falko

    falko Super Moderator Howtoforge Staff

  7. Geekocrat

    Geekocrat New Member

    <Please bear with me; I'm a Raw Linux Newbie.>

    I have the same problem installing ISPConfig on a new Gigabyte board with an AMD-64. So how does recompiling zlib affect the rest of the ISP setup? I finally got everything else working after 5 installs, and don't want to demolish anything!

    [Don't get me wrong. It was a great learning experience, and I'm very grateful for your extensive instructions in the article. "Hand holding" I called it when I tried to explain it to my wife. "You're holding hands over the Internet with a *guy* named Falko in Germany?" she shrieked. So now I'm sleeping on the couch. But the server works!]

    Many thanks,
    Nick
     
  8. falko

    falko Super Moderator Howtoforge Staff

    If ISPConfig is installed and running, then everything is fine, and you don't have to compile zlib! :)

    LOL :D
     
  9. Geekocrat

    Geekocrat New Member

    Well, I should've been more explicit. The server works (MySQL, Apache, etc) except for IPSConfig. The installation can't get past the error message,
    "relocation R_X86_64_32S against `a local symbol' can not be used when making a shared object; recompile with -fPIC"

    It appears from the advice in your link above that zlib should be recompiled with the --shared option to work around this problem. I just want to be sure I'm not going to break anything else in the installation when it's recompiled. Or at least I'd like to have some idea of what will break so I have some clue what to fix.

    Thanks again,
    Nick
     
  10. falko

    falko Super Moderator Howtoforge Staff

    Recompiling zlib won't break anything. Just do it! :)
     
  11. Geekocrat

    Geekocrat New Member

    OK, I did it. Did not work. So recompiling zlib with shared libraries is not the issue.

    I went back to this thread you recommended
    http://www.howtoforge.com/forums/showthread.php?t=1626
    and followed instructions by gbjbaanb except I was installing on Breezy Badger (Ubuntu) so did not need to install ssl-devel. Worked perfectly except that I did not write down the correct pwd for MySQL so had to reinstall. [Insert appropriate rough language here...][Lots of it.]:mad:

    This time I didn't recompile zlib so I could check if the shared libraries were the issue. Just used the tweaks in the link above. ISPConfig installed without a hitch.

    Bottom line: I suspect the compiler gives the "recompile with -FPIC" message because it can't find the shared libraries. When you change the ./configure to "--with-openssl" and the MySQL symbolic links, the compiler can find everything it needs.

    Thanks to everyone for the help and various links. And thanks to Falko and Till for a most impressive product.

    Nick
     

Share This Page