Hi, I followed "Bluetooth PAND (Personal Area Network) Howto For Debian Etch" and established the PAND connection. But on the PANU side the connection status is "Pending" although pings can be sent from the both sides with 0% loss and all received. on running the command at NAP: (I am using a desktop(Ubuntu) and an ASUS EEE(Xandros) with bluetooth dongles) ---> tail -f /var/log/syslog it gives the output like that: "you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth0 is attached. ** Can't bind to dhcp address: Address already in use Please make sure there is no other dhcp server running and that there's no entry for dhcp or bootp in /etc/inetd.conf. Also make sure you are not running HP JetAdmin software, which includes a bootp server." and when i try to reconnect the connection at PANU side, it displays in the log like that: "No DHCPOFFERS received No working leases in persistent database - sleeping" Can anybody guide ma to make it successful
Hi, Thanx topdog and all who visited this page I have fix it now .........Alhamdolillah. Anybody who is facing problem with connecting two PCs through bluetooth for internet , I can assist.....feel free to write me.
I have a problem in this subject, so I don't want to create a new topic. I'm using Ubuntu 8.04 instead of etch, and I can't connect to PC from my phone, accroding to "ps aux" the pand is running, but my k800i unable to connect. In the log I see this: Code: Jul 18 01:33:53 xmister NetworkManager: <debug> [1216337633.148482] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/bluetooth_acl_16b8ffe306'). Jul 18 01:33:53 xmister hcid[13888]: link_key_request (sba=00:11:F6:00:00:06, dba=00:16:B8:FF:E3:06) Jul 18 01:33:53 xmister NetworkManager: <debug> [1216337633.697303] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/bluetooth_acl_16b8ffe306').
I found sg: When the bluetooth service starts pand I cannot connect, but if I pand -K, then start pand with the same parameters as the service would...it works, I can connect and use the net with my phone... Anyone has an Idea why it is acting like this?
Bluetooth and DBUS issues: can't become primary owner of org.bluez? I am using Gutsy with a Dell630 with built in bluetooth. Hciconfig brings up hci0 with my BT address. But hcitool scan brings up nothing Code: @ubuntu1:~$ hciconfig hci0: Type: USB BD Address: 00:1A:6B:E6:A9:4D ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN RX bytes:985 acl:0 sco:0 events:30 errors:0 TX bytes:617 acl:0 sco:0 commands:28 errors:0 Code: @ubuntu1:~$ hcitool scan Scanning ... @ubuntu1:~$ Code: @ubuntu1:/var/run/dbus$ sudo rm -f /var/run/dbus/* [sudo] password for : @ubuntu1:/var/run/dbus$ dbus-uuidgen --ensure @ubuntu1:/var/run/dbus$ dbus-daemon --system Failed to start message bus: Failed to bind socket "/var/run/dbus/system_bus_socket": Permission denied @ubuntu1:/var/run/dbus$ sudo dbus-daemon --system @ubuntu1:/var/run/dbus$ modprobe bluetooth @ubuntu1:/var/run/dbus$ modprobe l2cap @ubuntu1:/var/run/dbus$ modprobe rfcomm @ubuntu1:/var/run/dbus$ modprobe hci-usb @ubuntu1:/var/run/dbus$ hcid -n hcid[7798]: Bluetooth HCI daemon hcid[7798]: HCI dev 0 registered hcid[7799]: Can't init device hci0: Permission denied (13) hcid[7798]: HCI dev 0 already up hcid[7798]: Device hci0 has been added hcid[7800]: Can't set link mode on hci0: Permission denied (13) hcid[7800]: Can't set link policy on hci0: Permission denied (13) hcid[7798]: Starting security manager 0 hcid[7798]: Can't write inquiry mode for hci0: Operation not permitted (1) hcid[7798]: Created local server at unix:abstract=/var/run/dbus-BVnoISlG8C,guid=8a5aabd33609a28fc1307d0048998408 hcid[7798]: Can't create server address file input[7801]: Bluetooth Input daemon input[7801]: Registered input manager path:/org/bluez/input input[7801]: Failed to listen on control channel serial[7802]: Bluetooth Serial Port daemon serial[7802]: Registered manager path:/org/bluez/serial network[7803]: Bluetooth Network daemon network[7803]: Can't create bridge network[7803]: Bind failed. Permission denied(13) hcid[7798]: Got NameOwnerChanged signal for :1.3 which has no listeners Can someone help me make sense of these errors and how I can explore them/ fix them? Are all these permission denied warnings coming up because I am not executing the command as root user? I tried the command as root user, but it still wouldn't work. When I normally type hcid -n, it tells me the following: Code: Jul 28 12:32:11 ubuntu1 hcid[9176]: Bluetooth HCI daemon Jul 28 12:32:11 ubuntu1 hcid[9176]: Could not become the primary owner of org.bluez Jul 28 12:32:11 ubuntu1 hcid[9176]: Unable to get on D-Bus What does is mean to not be able to become the primary owner of an object path? How can I check why this is happening? I am also suspecting that the hcid and DBUS session bus are not listening in on the same socket. Code: $ dbus-launch DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-KPh3xmCqvf,guid=99a32f2da779f2875fca52004899685b DBUS_SESSION_BUS_PID=7442 But in (from /etc/dbus-1/session.conf), session dbus listens to Code: <listen>unix:tmpdir=/tmp</listen> While Bluetooth (from /var/run/dbus/bluetoothd_address) listens to Code: unix:abstract=/var/run/dbus-YTFIvIHHn3,guid=7e076046a505b17fa2548b004899667e And (from /etc/dbus-1/system.conf) the System DBUS listens in on: Code: <listen>unix:path=/var/run/dbus/system_bus_socket</listen> These directories are different, but session dbus which is the one i'm probably interacting with is listening to a different directory all together... should i hardcode this directory setting to change it to /var/run/dbus? I've also modified the system.con and session.conf to include system-local.conf that allows user="root" and all active users to own "org.bluez" but to still no avail. Any ideas?
After reinstalling bluez-utils, bluez-libs, and lbdbus-1-3, I ran as root user: Code: hcid[18637]: Bluetooth HCI daemon hcid[18637]: Parsing /etc/bluetooth/main.conf failed: No such file or directory hcid[18637]: Starting SDP server hcid[18637]: Registered manager path:/org/bluez/serial hcid[18637]: Unix socket created: 12 hcid[18637]: Registered manager path:/org/bluez/audio [B]hcid[18637]: Can't init plugin /usr/lib/bluetooth/plugins/network.so[/B] hcid[18637]: Registered input manager path:/org/bluez/input [B]hcid[18637]: Failed to listen on control channel[/B] hcid[18637]: HCI dev 0 registered hcid[18637]: HCI dev 0 already up hcid[18637]: Device hci0 has been added hcid[18637]: Starting security manager 0 hcid[18637]: Device hci0 has been activated So! No more DBUS problems! Apparently, for now. Here's the screen cap from syslog: Code: Aug 12 12:29:41 ubuntu1 hcid[6147]: Bluetooth HCI daemon Aug 12 12:29:41 ubuntu1 hcid[6147]: Parsing /etc/bluetooth/main.conf failed: No such file or directory Aug 12 12:29:41 ubuntu1 hcid[6147]: Starting SDP server Aug 12 12:29:41 ubuntu1 hidd[6165]: Bluetooth HID daemon Aug 12 12:29:41 ubuntu1 hcid[6147]: Registered manager path:/org/bluez/serial Aug 12 12:29:41 ubuntu1 hcid[6147]: Unix socket created: 12 Aug 12 12:29:41 ubuntu1 hcid[6147]: Registered manager path:/org/bluez/audio Aug 12 12:29:41 ubuntu1 hcid[6147]: bridge pan0 created Aug 12 12:29:41 ubuntu1 hcid[6147]: Registered manager path:/org/bluez/network Aug 12 12:29:41 ubuntu1 hcid[6147]: Registered server path:/org/bluez/network/nap Aug 12 12:29:41 ubuntu1 hcid[6147]: Registered server path:/org/bluez/network/gn Aug 12 12:29:41 ubuntu1 hcid[6147]: Registered server path:/org/bluez/network/panu Aug 12 12:29:41 ubuntu1 pand[6180]: Bluetooth PAN daemon version 3.19 Aug 12 12:29:41 ubuntu1 hcid[6147]: Registered input manager path:/org/bluez/input [B]Aug 12 12:29:41 ubuntu1 hcid[6147]: Failed to listen on control channel[/B] Aug 12 12:29:41 ubuntu1 hcid[6147]: HCI dev 0 registered [B]Aug 12 12:29:41 ubuntu1 pand[6180]: Bind failed. Address already in use(98)[/B] Aug 12 12:29:41 ubuntu1 hcid[6147]: HCI dev 0 up Aug 12 12:29:41 ubuntu1 hcid[6147]: Device hci0 has been added Aug 12 12:29:41 ubuntu1 hcid[6147]: Starting security manager 0 Aug 12 12:29:41 ubuntu1 hcid[6147]: Device hci0 has been activated Does anyone else get a "Bind Failed" error? And how do I check if the control channel is being listened to? Thanks for your help!