Hi, I have configured IPConfig 2.2.29 to opensuse 11.1 with this tutorial and i got problem in ftp-server. FTP-server work fine but IPConfig says that FTP-Server are offline and Web-FTP won't work and error "Could not connect to localhost" occured. Thanks.
Don't know that tutorial, but I guess you are usign proftp then? Does proftp exist in the processlist (ps -aux)? What happens if you manually try to start your ftp-daemon? (in case you are using vsftpd and not proftp, use /etc/init.d/ispconfig_tcpserver as script) Any logs of the according ftp server after trying to start it? What does netstat -tap show?
Yes, proftp Code: ghetto:~ # ps -ef|grep proftp nobody 9934 1 0 Jan08 ? 00:00:00 proftpd: (accepting connections) ghetto:~ # netstat -tap | grep proftp tcp 0 0 *:ftp *:* LISTEN 9934/proftpd: (acce FTP service looks like it works fine, acctually i made one Site user and logged in with it, from another network. ISPConfig just say that ftp server is offline
Code: 127.0.0.1 localhost # special IPv6 addresses ::1 localhost ipv6-localhost ipv6-loopback fe00::0 ipv6-localnet ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts 127.0.0.2 ghetto.fleikki.com ghetto 79.141.144.5 ghetto.fleikki.com ghetto
Code: ghetto:~ # iptables -L Chain INPUT (policy DROP) target prot opt source destination DROP tcp -- anywhere loopback/8 ACCEPT all -- anywhere anywhere state RELATED,ESTAB LISHED ACCEPT all -- anywhere anywhere DROP all -- BASE-ADDRESS.MCAST.NET/4 anywhere PUB_IN all -- anywhere anywhere PUB_IN all -- anywhere anywhere PUB_IN all -- anywhere anywhere PUB_IN all -- anywhere anywhere DROP all -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTAB LISHED DROP all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination PUB_OUT all -- anywhere anywhere PUB_OUT all -- anywhere anywhere PUB_OUT all -- anywhere anywhere PUB_OUT all -- anywhere anywhere Chain INT_IN (0 references) target prot opt source destination ACCEPT icmp -- anywhere anywhere DROP all -- anywhere anywhere Chain INT_OUT (0 references) target prot opt source destination ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain PAROLE (10 references) target prot opt source destination ACCEPT all -- anywhere anywhere Chain PUB_IN (4 references) target prot opt source destination ACCEPT icmp -- anywhere anywhere icmp destination-un reachable ACCEPT icmp -- anywhere anywhere icmp echo-reply ACCEPT icmp -- anywhere anywhere icmp time-exceeded ACCEPT icmp -- anywhere anywhere icmp echo-request PAROLE tcp -- anywhere anywhere tcp dpt:ftp PAROLE tcp -- anywhere anywhere tcp dpt:ssh PAROLE tcp -- anywhere anywhere tcp dpt:smtp PAROLE tcp -- anywhere anywhere tcp dpt:domain PAROLE tcp -- anywhere anywhere tcp dpt:http PAROLE tcp -- anywhere anywhere tcp dpt:81 PAROLE tcp -- anywhere anywhere tcp dpt:pop3 PAROLE tcp -- anywhere anywhere tcp dpt:imap PAROLE tcp -- anywhere anywhere tcp dpt:https PAROLE tcp -- anywhere anywhere tcp dpt:ndmp ACCEPT udp -- anywhere anywhere udp dpt:domain DROP icmp -- anywhere anywhere DROP all -- anywhere anywhere Chain PUB_OUT (4 references) target prot opt source destination ACCEPT all -- anywhere anywhere
Looks ok. Did you switch off AppArmor? What are the outputs of Code: telnet localhost 21 and Code: telnet 127.0.0.1 21 ? What's in your proftpd.conf?
AppArmor have never been on, checked this anyway Code: ghetto:~ # telnet localhost 21 Trying ::1... telnet: connect to address ::1: Connection refused Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 FTP Server ready. Code: ghetto:~ # telnet 127.0.0.1 21 Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. 220 FTP Server ready. /etc/proftpd.conf Code: ServerName "ProFTPD Default Installation" ServerType standalone DefaultServer on # Port 21 is the standard FTP port. Port 21 # Don't use IPv6 support by default. UseIPv6 off # Umask 022 is a good standard umask to prevent new dirs and files # from being group and world writable. Umask 022 MaxInstances 30 # Set the user and group under which the server will run. User nobody Group nogroup # To cause every FTP user to be "jailed" (chrooted) into their home # directory, uncomment this line. DefaultRoot ~ IdentLookups off ServerIdent on "FTP Server ready." # Normally, we want files to be overwriteable. AllowOverwrite on # Bar use of SITE CHMOD by default #<Limit SITE_CHMOD> # DenyAll #</Limit> <Anonymous ~ftp> User ftp Group ftp # We want clients to be able to login with "anonymous" as well as "ftp" UserAlias anonymous ftp # Limit the maximum number of anonymous logins MaxClients 10 # We want 'welcome.msg' displayed at login, and '.message' displayed # in each newly chdired directory. DisplayLogin welcome.msg DisplayChdir .message # Limit WRITE everywhere in the anonymous chroot <Limit WRITE> DenyAll </Limit> </Anonymous> Include /etc/proftpd_ispconfig.conf /etc/proftpd_ispconfig.conf Code: DefaultAddress 127.0.0.1 <VirtualHost 127.0.0.2> DefaultRoot ~ AllowOverwrite on Umask 002 </VirtualHost> <VirtualHost 79.141.144.5> DefaultRoot ~ AllowOverwrite on Umask 002 </VirtualHost>
What happens if you comment out the line Code: Include /etc/proftpd_ispconfig.conf in your proftpd.conf and restart ProFTPd?
doesn't make any differens. from ISPConfig i can shutdown and start proftp and it work like a butter, it's just still say offline Seem that it can't get right status from proftp or something, wierd
I am having this exact same problem. I left a message in another thread but I am going to delete that one and wait on a reply from where. Thanks!
Everything looks normal other than I have instances of bad sectors on my hard disk: smartd[3060]: Device: /dev/sda [SAT], 4 Currently unreadable (pending) sectors I did notice the bind status reporting dead. I can stop but not start it. There are 2 sites that I have set up and I am getting an error of: Starting name server BIND /etc/named.conf:48: zone 'sirkaos.linkpc.net': already exists previous definition: /etc/named.conf:38 /etc/named.conf:53: zone 'amsico.com': already exists previous definition: /etc/named.conf:42 I created master, slave and ptr records for these 2. Was that incorrect?
maybe you added the domain amsico.com as primary and secondary dns record on the same server. You will have to delete the secondary record then and empty the recycle bin afterwards.
That sounds about right. I deleted everything under dns manager prior to this reply but now when I try to create a master dns record, I get the error,"You already created a domain (SOA Record) with the name amsico.com." I don't think there has been one created.
Do you see amsico.com in the dns_isp_dns table? Did you install the latest ISPConfig version (2.2.30)?
