Page not found on ISPCONFIG web

Discussion in 'Installation/Configuration' started by Philip_Anselmo, Mar 27, 2006.

  1. Philip_Anselmo

    Philip_Anselmo New Member

    I installed ISPCONFIG ona a K6-2 500 MHz PC running Debian Sarge (3.1) which I set up as the http://www.howtoforge.com/perfect_setup_debian_sarge says, after that I went to http://www.ispconfig.org/downloads.htm donloaded the 2.2.0 version of ISPCONFIG and downloaded to my /root/ and follow the instruction step by step... I'm from Chile and I speak spanish as a native language so when I was asked to choose a lang.. I choosed es (3), and everything installed ok, there were no errors, but the web is in english :confused: so I tryed to change the lang to spanish I went to Management / Settings and got a Page not found, and almost every seccion i click givesme a page not found :( is there any solution?

    I'm realy new to all this so please :$ help and be pacient please :eek:

    If I need to remove it please tellme how to cleanly remove my ISPConfig instalation and a step by stepguide on how to set it up again please, because the guide on the ispconf website isn't very clear at all :$ at lease to me

    please helpme :$

    I administrate my debian throught Putty on a windows XP and I used firefox 1.5 to connect to ispconfig, and tryed IE too... I have to connect to my deb by the ip because the https://hostname.domainname didn't work maybe some info about that too? ^.^ I'm using a LAN based on a D-Link router DI-524 wireless (but this PC the windows xp one, and the Debian Server are connected trhough cable on a Encore ENH708-MIN 8 port 10Mbps HUB) both the server an the XP PCs have static ips assigned by the D-Link's DHCP
     
    Last edited: Mar 27, 2006
  2. till

    till Super Moderator Staff Member ISPConfig Developer

  3. Philip_Anselmo

    Philip_Anselmo New Member

    Thanks I've allready have a solution :) but it's not working now :S for a time it worked, but i enabled the firewall on ISPConfig and now I'm back to the same not found problem

    The solution is to get the right domain and hostname so i can access de full web (services and everything that's not showing whe i access the web by https://serverip:81) I have to get the domain-name and host-name working on my lan (the ispconfig server i'm using it on a lan only as a home web server for experimentation)

    My lan is mannaged by a DI-524 router (192.168.0.1/255.255.255.240) which as DHCP working the debian sarge server has the static ip 192.168.0.10 asigned by dhcp. The debian has no X installed, so I access the ISPConfig web on my desktop pc running M$ Wintendo XP :D which has this DNS on the same order:

    192.168.0.10
    192.168.0.1
    216.155.73.154

    and my dns is configured like this :

    named.conf
    Code:
    //// MAKE MANUAL ENTRIES BELOW THIS LINE! ////
    
    
    zone "philisoft.org" {
            type master;
            file "db.philipsoft.org";
    };
    
    zone "0.168.192.in-addr.arpa" {
            type master;
            file "db.192.168.0";
    };
    
    
    db.philipsoft.org
    Code:
    ;
    ;BIND data file for zone philipsoft.org
    ;
    $TTL        86400
    @       IN      SOA     philipsoft.org. admin.philipsoft.org. (
                            2006032701       ; serial, todays date + todays serial #
                            10800              ; refresh, seconds
                            7200              ; retry, seconds
                            604800              ; expire, seconds
                            86400 )            ; minimum, seconds
    ;
                    NS      ns1.philipsoft.org.              ; Inet Address of name  server 1
                    NS      ns2.philipsoft.org.              ; Inet Address of name  server 2
    ;
    localhost       A       127.0.0.1
    philipsoft.org. A       192.168.0.10
    
    polarbear       A       192.168.0.10
    ispcadmin       A       192.168.0.10
    ns1             A       192.168.0.10
    ns2             A       192.168.0.1
    ns3             A       216.155.73.154
    
    db.192.168.0
    Code:
    ;
    ; BIND reverse data file for zone 192.168.0
    ;
    $TTL    86400
    @       IN      SOA     philipsoft.org. hostmaster.philipsoft.org. (
                            2006032701      ; Serial
                            10800           ; Refresh
                             7200           ; Retry
                           604800           ; Expire
                            86400 )         ; Negative Cache TTL
    
            IN      NS      ns1.philipsoft.org.
    10      IN      PTR     ns1.philipsoft.org.
    1       IN      PTR     ns2.philipsoft.org.
    
    
    resolf.conf
    Code:
    search philipsoft.org
    nameserver 192.168.0.10
    nameserver 192.168.0.1
    nameserver 216.155.73.154
    nameserver 145.253.2.75
    nameserver 193.174.32.18
    nameserver 194.25.0.60
    

    hosts
    Code:
    127.0.0.1       localhost.localdomain   localhost       polarbear
    192.168.0.10    polarbear.philipsoft.org        polarbear
    
    # The following lines are desirable for IPv6 capable hosts
    ::1     ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters
    ff02::3 ip6-allhosts
    
    hostname
    Code:
    polarbear.philipsoft.org
    
    but when i do for exaple
    C:\ping -a polarbear.philipsoft.org
    I get a host not found :(

    What I'm trying to do is to assign the hostname polarbear to my debian server and the domain philipsoft.org and the hostname ispcadmin, and everything working so I can access the ISPConfig web trhough https://ispcadmin.philipsoft.org

    please help :eek: !!!!!

    I'm going nutts trying to make the DNS works!!! so i can get the ispconfig working for once and for all and havo no more errors :$:$:$ I still have to design the web and everything so I need the ISPConfig good and running as soon as I can :$

    PD: If someone knows a portal system like PHP-Nuke that has flash also integrated and new tecnologies please tellme about it too :p I would like to know new portal systems to work with
     
  4. falko

    falko Super Moderator Howtoforge Staff

    It seems you don't have any name servers for philipsoft.org:

    Code:
    dig ns philipsoft.org
    
    ; <<>> DiG 9.2.1 <<>> ns philipsoft.org
    ;; global options:  printcmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 1694
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
    
    ;; QUESTION SECTION:
    ;philipsoft.org.                        IN      NS
    
    ;; AUTHORITY SECTION:
    org.                    10711   IN      SOA     tld1.ultradns.net. domadmin.ultradns.net. 2006071346 1800 900 604800 86400
    
    ;; Query time: 2 msec
    ;; SERVER: 81.169.163.104#53(81.169.163.104)
    ;; WHEN: Tue Mar 28 10:35:23 2006
    ;; MSG SIZE  rcvd: 94
    So you'd have to create name servers first and then create all the records on these name servers.
    If this is too much hassle, you can simply edit the hosts file on your client PCs: http://www.howtoforge.com/forums/showthread.php?t=432&highlight=hosts+file+windows
     

Share This Page