I'm attempting to build a SuSE 9.3 system via the "Perfect Setup" document and I've come into a problem configuring Quotas. I'm at the part: -=-=-=- touch /aquota.user /aquota.group chmod 600 /aquota.* mount -o remount / quotacheck -avugm quotaon -avug -=-=-=- The first time I ran this, quotacheck -avugm returned the message "quotafile was probably truncated". And the line quotaon -avug returned "quota format not supported in kernel". I attempted to repeat the entire quota section and the line quotacheck -avugm said nothing more about truncated files. So I assume this part is ok. The line quotaon -avug still returns the message about "quota format not supported in kernel". I'm not really sure as to why. I have not loaded anything custom, as everything has been installed per the "Perfect Setup" documentation. Any suggestions? -=- I'm also interested in a "Perfect Setup" specifically for RedHat 9 and/or RedHat Enterprise Linux 4 (RHEL4). Any information on these versions?
Still having quota problems I looket at http://www.howtoforge.com/forums/showthread.php?t=3083 and still have problems. -=- touch /aquota.user /aquota.group chmod 600 /aquota.* mount -o remount / quotacheck -avug then i get the message "quotacheck: Cannot remount filesystem mounted on / read-only so counted values might not be right. Please stop all programs writing to filesystem or use -m flag to force checking. (didn't get this message before) then I ran quotaon -avug and got the message quotaon: using //aquota.group on /dev/hda2 [/]: No such process quotaon: Quota format not supported in kernel. quotaon: using //aquota.user on /dev/hda2 [/]: No such process quotaon: Quota format not supported in kernel. -=- here's my fstab /dev/hda2 / reiserfs acl,user_xattr,usrquota,grpquota 1 1 /dev/hda1 swap swap pri=42 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 sysfs /sys sysfs noauto 0 0 /dev/cdrom /media/cdrom subfs noauto,fs=cdfss,ro,procuid,nosuid,nodev,exec,iocharset=utf8 0 0 /dev/fd0 /media/floppy subfs noauto,fs=floppyfss,procuid,nodev,nosuid,sync 0 0 Not sure what the problem is. I've redone the entire "Perfect Setup" and the "how-to" dies here again.
also... also tried modprobe quota_v1 FATAL: Could not load /lib/modules/2.6.11.4-20a-default/modules.dep: No such file or directory modprobe quota_v2 FATAL: Could not load /lib/modules/2.6.11.4-20a-default/modules.dep: No such file or directory quotaon -avug quotaon: using //aquota.group on /dev/hda2 [/]: No such process quotaon: Quota format not supported in kernel. quotaon: using //aquota.user on /dev/hda2 [/]: No such process quotaon: Quota format not supported in kernel.
Quotas... again! OK. I reinstalled SuSE 9.3, being sure to use EXT3 (instead of ReiserFS) This time, running: touch /aquota.user /aquota.group chmod 600 /aquota.* mount -o remount / quotacheck -avug Seemingly worked fine. Then I ran: quotaon -avug and got the message quotaon: using //aquota.group on /dev/hda2 [/]: No such process quotaon: Quota format not supported in kernel. quotaon: using //aquota.user on /dev/hda2 [/]: No such process quotaon: Quota format not supported in kernel. Don't know what the problem is. I tried "modprobe quota_v1" and v2. Both say "could not load /lib/modules/2.6.11.4-20a-default/modules.dep No such file or folder" I rechecked all the previous steps from the how-to document. Everything appears to have been completed as well as properly spelled. Any more ideas?
Please run Code: echo quota_v1 >> /etc/modules echo quota_v2 >> /etc/modules and reboot the system. Does it work then?
Postfix postconf OK. I'm now to the postconf part of Postfix. Thus far (with much thanks) I've gotten here with no further problems. I would like clairification as to which parts are your "put your data here" and which parts are system phrases / config strings. The section I am in question of is below. -=- postconf -e 'mydomain = example.com' postconf -e 'myhostname = server1.$mydomain' postconf -e 'smtpd_sasl_local_domain =' postconf -e 'smtpd_sasl_auth_enable = yes' postconf -e 'smtpd_sasl_security_options = noanonymous' postconf -e 'broken_sasl_auth_clients = yes' postconf -e 'smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,check_relay_domains' postconf -e 'inet_interfaces = all' postconf -e 'alias_maps = hash:/etc/aliases' postconf -e 'smtpd_tls_auth_only = no' postconf -e 'smtp_use_tls = yes' postconf -e 'smtpd_use_tls = yes' postconf -e 'smtp_tls_note_starttls_offer = yes' postconf -e 'smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key' postconf -e 'smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt' postconf -e 'smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem' postconf -e 'smtpd_tls_loglevel = 1' postconf -e 'smtpd_tls_received_header = yes' postconf -e 'smtpd_tls_session_cache_timeout = 3600s' postconf -e 'tls_random_source = dev:/dev/urandom' -=-
Code: postconf -e 'mydomain = example.com' postconf -e 'myhostname = server1.$mydomain' You must replace this with your own data. Code: postconf -e 'smtpd_sasl_local_domain =' postconf -e 'smtpd_sasl_auth_enable = yes' postconf -e 'smtpd_sasl_security_options = noanonymous' postconf -e 'broken_sasl_auth_clients = yes' postconf -e 'smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,check_relay_domains' postconf -e 'inet_interfaces = all' postconf -e 'alias_maps = hash:/etc/aliases' postconf -e 'smtpd_tls_auth_only = no' postconf -e 'smtp_use_tls = yes' postconf -e 'smtpd_use_tls = yes' postconf -e 'smtp_tls_note_starttls_offer = yes' postconf -e 'smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key' postconf -e 'smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt' postconf -e 'smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem' postconf -e 'smtpd_tls_loglevel = 1' postconf -e 'smtpd_tls_received_header = yes' postconf -e 'smtpd_tls_session_cache_timeout = 3600s' postconf -e 'tls_random_source = dev:/dev/urandom' You can copy and paste this part.
index.pl OK. Finally back to working on install. I got through most of the Apache/PHP5 section and just before the Proftpd section, I'm doing the commands: SuSEconfig /etc/init.d/apache2 start Restarting apache yields an error saying index.pl is either misspelled or refers to a module not installed. Do I need to remove index.pl from the httpd.conf file, or am I missing a step? The documentation said to comment out the line application/x-perl pl pm from the mime.types file.
ISPconfig OK. I found remaining problems with the initial setup. Now I'm into ISPconfig and having difficulties. I got to the point of ./setup and it ran for a long time. Now I get a message about how it "stops here". checking for working mmap... yes checking for _LARGEFILE_SOURCE value needed for large files... 1 checking for fseeko... yes checking whether snprintf correctly terminates long strings... yes checking pthread.h usability... yes checking pthread.h presence... yes checking for pthread.h... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for zlib installation... /usr configure: error: Please install zlib and zlib-devel packages ERROR: Could not configure ClamAV cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/aps.tar.gz': No such file or directory mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory mv: cannot stat `binaries/clamav.tar.gz': No such file or directory mv: cannot stat `binaries/cronolog': No such file or directory mv: cannot stat `binaries/cronosplit': No such file or directory mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory mv: cannot stat `binaries/zip': No such file or directory mv: cannot stat `binaries/unzip': No such file or directory tar: spamassassin.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `spamassassin': No such file or directory tar: uudeview.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `uudeview': No such file or directory tar: clamav.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `clamav': No such file or directory tar: aps.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors ./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here! I noticed something about zlib and ClamAV and such, but I don't really know why. i also see that "The PHP binary coming with ISPConfig does not work properly on your system!" As far as I know I followed the Suse 9.3 Perfect Setup all the way. Is this a problem with my initial setup, or has ISPconfig changed since the Perfect Setup documentation?
