Hey all.. So I'm at this step in the manual: I am doing it as compileuser, per the instructions (NOT ROOT!!), but it is failing. sorry in advance for the lengthy post - Apparently this forum does not use the 'spoiler' bbcode feature to 'hide' long code snippets etc.. Expand cp -f imap/mkpop3dcert.8 . cp ./maildir/maildirkw.1 . cp imap/imapd.dist . cp imap/imapd-ssl.dist . cp imap/pop3d.dist . cp imap/pop3d-ssl.dist . cp imap/imapd.cnf . cp imap/pop3d.cnf . cp -f ./maildir/quotawarnmsg quotawarnmsg.example make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1' + /usr/bin/make check Making check in numlib make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/numlib' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/numlib' Making check in md5 make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/md5' ./md5test | cmp -s - ./md5test.txt make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/md5' Making check in sha1 make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/sha1' ./testsuite | cmp -s - ./testsuite.txt make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/sha1' Making check in bdbobj make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/bdbobj' ./testsuite | cmp -s - ./testsuite.txt make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/bdbobj' Making check in gdbmobj make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/gdbmobj' ./testsuite | cmp -s - ./testsuite.txt make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/gdbmobj' Making check in soxwrap make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/soxwrap' ./testprog make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/soxwrap' Making check in unicode make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/unicode' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/unicode' Making check in rfc822 make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc822' /usr/bin/make check-am make[2]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc822' ./testsuite | cmp -s - ./testsuite.txt ./reftest | cmp -s - ./reftest.txt make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc822' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc822' Making check in random128 make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/random128' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/random128' Making check in rfc1035 make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc1035' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc1035' Making check in rfc2045 make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc2045' /usr/bin/make check-am make[2]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc2045' /bin/sh ./testsuite | cmp -s - ./testsuite.txt.idn make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc2045' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rfc2045' Making check in liblock make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/liblock' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/liblock' Making check in maildir make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/maildir' /usr/bin/make check-am make[2]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/maildir' /bin/sh ./testsuite 2>&1 | cmp - ./testsuite.txt test "-lpcre" != "" || exit 0 ; /bin/sh ./testsuite2 2>&1 | cmp - ./testsuite2.txt LC_ALL=C; export LC_ALL; ./maildirkwtest | cmp -s - ./maildirkwtest.txt LC_ALL=C; export LC_ALL; ./maildiraclttest make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/maildir' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/maildir' Making check in makedat make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/makedat' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/makedat' Making check in libhmac make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/libhmac' test ! -x ./md5hmactest || ./md5hmactest | cmp -s - ./md5hmactest.txt test ! -x ./sha1hmactest || ./sha1hmactest | cmp -s - ./sha1hmactest.txt make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/libhmac' Making check in waitlib make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/waitlib' ./testwait make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/waitlib' Making check in tcpd make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/tcpd' /usr/bin/make check-am make[2]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/tcpd' sh ./testsuite 2>&1 | cmp -s - ./testsuite.txt make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/tcpd' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/tcpd' Making check in rootcerts make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rootcerts' make[1]: Nothing to be done for `check'. make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/rootcerts' Making check in imap make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/imap' /usr/bin/make check-am make[2]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/imap' LC_ALL=C; export LC_ALL; ./testsuite | ./testsuitefix.pl | sort | cmp -s - ./testsuite.txt **************************** * Sanity check in progress * **************************** INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=90, body=2398, rcvd=764, sent=9134, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=218, body=0, rcvd=1046, sent=2769, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=73, sent=459, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=249, sent=889, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=97, sent=532, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=61, sent=437, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=203, sent=1157, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=214, sent=893, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=517, sent=3430, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=29, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=29, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=50, sent=769, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=50, sent=841, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=368, sent=2049, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=148, body=0, rcvd=572, sent=1294, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=186, sent=756, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=27, sent=331, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=67, sent=388, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=691, sent=3154, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=181, sent=641, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=33, sent=111, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=139, sent=702, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=156, sent=641, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=672, sent=3060, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=238, sent=975, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=2412, sent=11939, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=156, rcvd=1397, sent=7555, time=0 INFO: LOGIN, user=user1, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=user1, ip=[127.0.0.1], headers=0, body=0, rcvd=155, sent=485, time=0 INFO: LOGIN, user=user2, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=user2, ip=[127.0.0.1], headers=0, body=0, rcvd=117, sent=317, time=0 INFO: LOGIN, user=user0, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=user0, ip=[127.0.0.1], headers=0, body=0, rcvd=109, sent=677, time=0 INFO: LOGIN, user=user2, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=user2, ip=[127.0.0.1], headers=0, body=0, rcvd=896, sent=3055, time=0 INFO: LOGIN, user=user1, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=user1, ip=[127.0.0.1], headers=0, body=0, rcvd=135, sent=720, time=0 INFO: LOGIN, user=user1, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=user1, ip=[127.0.0.1], headers=0, body=0, rcvd=464, sent=2582, time=0 INFO: LOGIN, user=user1, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=user1, ip=[127.0.0.1], headers=0, body=0, rcvd=404, sent=1888, time=0 LC_ALL=C; export LC_ALL; test "yes" = "yes" || exit 0; /bin/sh ./smaptestsuite | ./testsuitefix.pl | sort | cmp -s - ./smaptestsuite.txt INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=65, sent=3023, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=44, sent=175, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=1179, body=461, rcvd=565, sent=3171, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=18, body=5962, rcvd=665, sent=7765, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=164, sent=67564, time=1 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=2346, sent=11641, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=1118, sent=3783, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=124, sent=591, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=20, sent=110, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=161, sent=722, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=308, sent=1640, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=28, sent=128, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=1195, body=0, rcvd=355, sent=2038, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=379, sent=1353, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=334, sent=1107, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=45, sent=167, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=IMAP INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=81, sent=824, time=0 INFO: LOGIN, user=compileuser, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=compileuser, ip=[127.0.0.1], headers=0, body=0, rcvd=140, sent=488, time=0 INFO: LOGIN, user=confmdtest, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=confmdtest, ip=[127.0.0.1], headers=0, body=0, rcvd=2491, sent=6268, time=0 INFO: LOGIN, user=confmdtest, ip=[127.0.0.1], port=[0], protocol=SMAP1 INFO: LOGOUT, user=confmdtest, ip=[127.0.0.1], headers=0, body=0, rcvd=26, sent=610, time=0 make[2]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/imap' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1/imap' make[1]: Entering directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1' make[1]: Leaving directory `/home/compileuser/rpm/BUILD/courier-imap-4.8.1' + exit 0 Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.UK4wcF + umask 022 + cd /home/compileuser/rpm/BUILD + '[' /home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386 '!=' / ']' + rm -rf /home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386 ++ dirname /home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386 + mkdir -p /home/compileuser/rpm/BUILDROOT + mkdir /home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386 mkdir: cannot create directory `/home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386': Permission denied error: Bad exit status from /var/tmp/rpm-tmp.UK4wcF (%install) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.UK4wcF (%install) [compileuser@linsrv downloads]$ sudo rpmbuild -ta courier-imap-4.8.1.tar.bz2 [sudo] password for compileuser: Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.keNm3H + umask 022 + cd /home/compileuser/rpm/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/compileuser/rpm/BUILD + rm -rf courier-imap-4.8.1 + /usr/bin/bzip2 -dc /home/compileuser/downloads/courier-imap-4.8.1.tar.bz2 + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd courier-imap-4.8.1 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables -I/usr/lib/courier-imap/lib/gfortran/modules' + export FFLAGS + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-redhat-linux-gnu --program-prefix= --prefix=/usr/lib/courier-imap --exec-prefix=/usr/lib/courier-imap --bindir=/usr/lib/courier-imap/bin --sbindir=/usr/lib/courier-imap/sbin --sysconfdir=/usr/lib/courier-imap/etc --datadir=/usr/lib/courier-imap/share --includedir=/usr/lib/courier-imap/include --libdir=/usr/lib/courier-imap/lib --libexecdir=/usr/lib/courier-imap/libexec --localstatedir=/var/run --sharedstatedir=/var/lib --mandir=/usr/lib/courier-imap/man --infodir=/usr/share/info --with-redhat checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for i686-pc-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for gawk... (cached) gawk checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for perl5... no checking for perl... /usr/bin/perl checking for sysconftool...... ././sysconftool checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1966080 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for i686-pc-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for i686-pc-linux-gnu-ar... no checking for ar... ar checking for i686-pc-linux-gnu-strip... no checking for strip... strip checking for i686-pc-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... yes checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for env... /bin/env configure: WARNING: === Do not compile Courier-IMAP as root. Compile configure: WARNING: === Courier-IMAP as a non-root user then su to configure: WARNING: === root before running make install. You must now configure: WARNING: === remove this entire directory and then extract the configure: WARNING: === source code from the tarball as a non-root user configure: WARNING: === and rerun the configure script. If you have read configure: WARNING: === the INSTALL file you should have known this. So configure: WARNING: === you better read INSTALL again. configure: error: aborted. error: Bad exit status from /var/tmp/rpm-tmp.keNm3H (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.keNm3H (%prep) [compileuser@linsrv downloads]$ sudo rpmbuild -ta courier-imap-4.8.1.tar.bz2 [sudo] password for compileuser: Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.qZAMSF + umask 022 + cd /home/compileuser/rpm/BUILD + LANG=C + export LANG + unset DISPLAY + cd /home/compileuser/rpm/BUILD + rm -rf courier-imap-4.8.1 + /usr/bin/bzip2 -dc /home/compileuser/downloads/courier-imap-4.8.1.tar.bz2 + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd courier-imap-4.8.1 + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables' + export CFLAGS + CXXFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables' + export CXXFLAGS + FFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i586 -mtune=generic -fasynchronous-unwind-tables -I/usr/lib/courier-imap/lib/gfortran/modules' + export FFLAGS + ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=i586-redhat-linux-gnu --program-prefix= --prefix=/usr/lib/courier-imap --exec-prefix=/usr/lib/courier-imap --bindir=/usr/lib/courier-imap/bin --sbindir=/usr/lib/courier-imap/sbin --sysconfdir=/usr/lib/courier-imap/etc --datadir=/usr/lib/courier-imap/share --includedir=/usr/lib/courier-imap/include --libdir=/usr/lib/courier-imap/lib --libexecdir=/usr/lib/courier-imap/libexec --localstatedir=/var/run --sharedstatedir=/var/lib --mandir=/usr/lib/courier-imap/man --infodir=/usr/share/info --with-redhat checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for i686-pc-linux-gnu-gcc... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for gawk... (cached) gawk checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for perl5... no checking for perl... /usr/bin/perl checking for sysconftool...... ././sysconftool checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1966080 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking for /usr/bin/ld option to reload object files... -r checking for i686-pc-linux-gnu-objdump... no checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for i686-pc-linux-gnu-ar... no checking for ar... ar checking for i686-pc-linux-gnu-strip... no checking for strip... strip checking for i686-pc-linux-gnu-ranlib... no checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... yes checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for env... /bin/env configure: WARNING: === Do not compile Courier-IMAP as root. Compile configure: WARNING: === Courier-IMAP as a non-root user then su to configure: WARNING: === root before running make install. You must now configure: WARNING: === remove this entire directory and then extract the configure: WARNING: === source code from the tarball as a non-root user configure: WARNING: === and rerun the configure script. If you have read configure: WARNING: === the INSTALL file you should have known this. So configure: WARNING: === you better read INSTALL again. configure: error: aborted. error: Bad exit status from /var/tmp/rpm-tmp.qZAMSF (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.qZAMSF (%prep) [compileuser@linsrv downloads]$ There were a couple attempts there.. The first one (initial attempt) gave me a permission denied error in a folder compileuser should own... (mkdir: cannot create directory `/home/compileuser/rpm/BUILDROOT/courier-imap-4.8.1-2.11.i386': Permission denied)
Okay, I thought I saw where we were going with this, most of the files were owned by root, so I did a chown -R on that directory, and re-ran the rpmbuild -ta command on the imap file.. Here is what I get: Code: rm: cannot remove `courier-imap-4.8.1/rfc2045/testsuite.txt.noidn': Permission denied rm: cannot remove `courier-imap-4.8.1/rfc2045/makemime.1': Permission denied rm: cannot remove `courier-imap-4.8.1/rfc2045/base64.h': Permission denied rm: cannot remove `courier-imap-4.8.1/rfc2045/rfc2045acchk.c': Permission denied rm: cannot remove `courier-imap-4.8.1/rfc2045/base64.c': Permission denied rm: cannot remove `courier-imap-4.8.1/rfc2045/rfc2045acprep.c': Permission denied rm: cannot remove `courier-imap-4.8.1/rfc2045/rfc2045decodemimesectionu.c': Permission denied rm: cannot remove `courier-imap-4.8.1/rfc2045/rfc2045header.c': Permission denied rm: cannot remove `courier-imap-4.8.1/rfc2045/makemime.c': Permission denied error: Bad exit status from /var/tmp/rpm-tmp.oTwkRU (%prep) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.oTwkRU (%prep) [compileuser@linsrv downloads]$ ls -l /var/tmp total 64 -rw------- 1 compileuser compileuser 2476 2010-10-30 09:45 rpm-tmp.cR7RI2 -rw------- 1 root root 3645 2010-10-29 14:34 rpm-tmp.EAKuDS -rw------- 1 compileuser compileuser 2476 2010-10-30 09:25 rpm-tmp.i2Tjqp -rw------- 1 compileuser compileuser 2476 2010-10-30 09:43 rpm-tmp.jXiPSs -rw------- 1 root root 2476 2010-10-29 16:24 rpm-tmp.keNm3H -rw------- 1 root root 3645 2010-10-29 15:13 rpm-tmp.kZdqr9 -rw------- 1 compileuser compileuser 2476 2010-10-30 09:42 rpm-tmp.LZiKKX -rw------- 1 compileuser compileuser 2476 2010-10-30 09:50 rpm-tmp.oTwkRU -rw------- 1 compileuser compileuser 2476 2010-10-30 09:40 rpm-tmp.q3Qjt7 -rw------- 1 compileuser compileuser 2476 2010-10-30 09:41 rpm-tmp.qsJ0t6 -rw------- 1 root root 2476 2010-10-29 16:29 rpm-tmp.qZAMSF -rw------- 1 compileuser compileuser 6085 2010-10-29 16:20 rpm-tmp.UK4wcF drwx------ 2 compileuser compileuser 4096 2010-10-29 15:07 yum-compileuser-l4jaUy drwx------ 3 Rooster Rooster 4096 2010-10-01 23:35 yum-Rooster-hf4FCN drwx------ 3 trin trin 4096 2010-10-20 18:45 yum-trin-bO_5e7 [compileuser@linsrv downloads]$ There are several hundred lines of that, I just snipped it.. So I check the /var/tmp folder, and sure enough as you can see, the tmp folder it complains about IS owned by compileuser. Additionally: Code: [compileuser@linsrv downloads]$ ls -l total 17708 -rw-rw-r-- 1 compileuser compileuser 7107206 2010-10-11 18:24 courier-0.65.1.20101011.tar.bz2 -rw-rw-r-- 1 compileuser compileuser 2817119 2009-12-29 18:51 courier-authlib-0.63.0.tar.bz2 -rw-rw-r-- 1 compileuser compileuser 3352500 2010-10-04 16:47 courier-imap-4.8.1.tar.bz2 -rw-rw-r-- 1 compileuser compileuser 2422151 2010-10-04 16:44 maildrop-2.5.1.tar.bz2 -rw-rw-r-- 1 compileuser compileuser 2422151 2010-10-04 16:44 maildrop-2.5.1.tar.bz2.1 [compileuser@linsrv downloads]$ the files in the downloads are also owned by compileuser.. Though, the top four files in that list are red, and the 5th (maildrop) is black, in the filename portion.. Help? FWIW - I have tried it numerous times, I was chmod'ing the /var/tmp folder it complained about to compileuser and re-running to no avail. That was when I finally noticed after copy/pasting the /tmp directory that it was making new folders, and that they DID have what I think to be proper ownership. Thanks!
If you can not compile courier on your system, you can use dovecot instead. As it can be sometimes tricky to compile courier on fedor and as there are no rpm packages available, we switched to dovecot in the latest installation guides (for Fedora 13): http://www.howtoforge.com/perfect-server-fedora-13-x86_64-ispconfig-3-p4 I guess that the setup should work for fedora 11 as well if you use the fedora 13 guide.
