My screen is only 800x600. Here is my xorg log: Code: (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 4.1 (II) intel(0): initializing int10 (II) intel(0): Primary V_BIOS segment is: 0xc000 (II) intel(0): VESA BIOS detected (II) intel(0): VESA VBE Version 3.0 (II) intel(0): VESA VBE Total Mem: 1024 kB (II) intel(0): VESA VBE OEM: Intel815M(TM) Graphics Chip Accelerated VGA BIOS (II) intel(0): VESA VBE OEM Software Rev: 1.0 (II) intel(0): VESA VBE OEM Vendor: Intel Corporation (II) intel(0): VESA VBE OEM Product: i815M Graphics Controller (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) intel(0): VESA VBE DDC supported (II) intel(0): VESA VBE DDC Level none (II) intel(0): VESA VBE DDC transfer in appr. 0 sec. (II) intel(0): VESA VBE DDC read failed (--) intel(0): Chipset: "i815" (--) intel(0): Linear framebuffer at 0xF8000000 (--) intel(0): IO registers at addr 0xF4000000 (II) intel(0): Kernel reported 81920 total, 1 used (II) intel(0): I810CheckAvailableMemory: 327676k available (==) intel(0): Will alloc AGP framebuffer: 24576 kByte (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (II) intel(0): Configured Monitor: Using default hsync range of 31.50-37.90 kHz (II) intel(0): Configured Monitor: Using default vrefresh range of 50.00-70.00 Hz (WW) intel(0): Unable to estimate virtual size (II) intel(0): Clock range: 9.50 to 163.00 MHz (II) intel(0): Not using default mode "640x350" (vrefresh out of range) (II) intel(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x400" (vrefresh out of range) (II) intel(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "720x400" (vrefresh out of range) (II) intel(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x480" (hsync out of range) (II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (hsync out of range) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (hsync out of range) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (hsync out of range) (II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (unknown reason) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (hsync out of range) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (hsync out of range) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (hsync out of range) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (hsync out of range) (II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (hsync out of range) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x960" (hsync out of range) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x960" (hsync out of range) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (hsync out of range) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (hsync out of range) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (hsync out of range) (II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (hsync out of range) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "832x624" (hsync out of range) (II) intel(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (hsync out of range) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (hsync out of range) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (hsync out of range) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (hsync out of range) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (hsync out of range) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (hsync out of range) (II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1360x768" (hsync out of range) (II) intel(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1360x768" (hsync out of range) (II) intel(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (hsync out of range) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (hsync out of range) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (hsync out of range) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1440x900" (hsync out of range) (II) intel(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1024" (hsync out of range) (II) intel(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (hsync out of range) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (hsync out of range) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1080" (hsync out of range) (II) intel(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1200" (hsync out of range) (II) intel(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (--) intel(0): Virtual size is 800x600 (pitch 1024) (**) intel(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) intel(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) intel(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.5.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (**) intel(0): page flipping disabled (II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable. (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) intel(0): Setting dot clock to 40.0 MHz [ 0x8 0x1 0x30 ] [ 10 3 3 ] (II) intel(0): chose watermark 0x22007000: (tab.freq 40.0) (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00000000 (pgoffset 0) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01800000 (pgoffset 6144) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01c00000 (pgoffset 7168) (II) intel(0): Allocated of 4096 bytes for HW cursor (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01c01000 (pgoffset 7169) (II) intel(0): Allocated of 16384 bytes for ARGB HW cursor (II) intel(0): Adding 768 scanlines for pixmap caching (II) intel(0): Allocated Scratch Memory (II) intel(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Setting up tile and stipple cache: 28 128x128 slots 6 256x256 slots (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): DPMS enabled (WW) intel(0): Direct rendering disabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) (II) config/hal: Adding input device Macintosh mouse button emulation (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.5.2, module version = 2.0.99 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event0" (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Configuring as mouse (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.5.2, module version = 0.15.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.1 (II) Synaptics touchpad driver version 0.15.2 (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (**) Option "Device" "/dev/input/event9" (--) AlpsPS/2 ALPS GlidePoint touchpad found (**) AlpsPS/2 ALPS GlidePoint: always reports core events (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD) (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (--) AlpsPS/2 ALPS GlidePoint touchpad found (II) config/hal: Adding input device PS/2 Mouse (**) PS/2 Mouse: always reports core events (**) PS/2 Mouse: Device: "/dev/input/event8" (II) PS/2 Mouse: Found x and y relative axes (II) PS/2 Mouse: Found 3 mouse buttons (II) PS/2 Mouse: Configuring as mouse (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) AT Translated Set 2 keyboard: xkb_rules: "evdev" (**) Option "xkb_model" "pc105" (**) AT Translated Set 2 keyboard: xkb_model: "pc105" (**) Option "xkb_layout" "us" (**) AT Translated Set 2 keyboard: xkb_layout: "us" (II) config/hal: Adding input device Sony Vaio Keys (**) Sony Vaio Keys: always reports core events (**) Sony Vaio Keys: Device: "/dev/input/event6" (II) Sony Vaio Keys: Found keys (II) Sony Vaio Keys: Configuring as keyboard (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Sony Vaio Keys: xkb_rules: "evdev" (**) Option "xkb_model" "pc105" (**) Sony Vaio Keys: xkb_model: "pc105" (**) Option "xkb_layout" "us" (**) Sony Vaio Keys: xkb_layout: "us" (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event5" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Video Bus: xkb_rules: "evdev" (**) Option "xkb_model" "pc105" (**) Video Bus: xkb_model: "pc105" (**) Option "xkb_layout" "us" (**) Video Bus: xkb_layout: "us" AUDIT: Wed Nov 26 00:17:48 2008: 5267 X: client 4 rejected from local host ( uid=0 gid=0 pid=5439 ) AUDIT: Wed Nov 26 00:18:36 2008: 5267 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=5443 )
Section "Device" Identifier "Configured Video Device" Option "UseFBDev" "true" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection
Can you replace the Monitor section with this one? Code: Section "Monitor" Identifier "Generic Monitor" Option "DPMS" HorizSync 28-51 VertRefresh 43-60 DisplaySize 270 203 # 1024x768 96dpi # DisplaySize 338 254 # 1280x960 96dpi # DisplaySize 338 270 # 1280x1024 96dpi # DisplaySize 370 277 # 1400x1050 96dpi # DisplaySize 423 370 # 1600x1400 96dpi EndSection Please make sure you uncomment the desired screen resolution (of course, your monitor and graphics card must support it).
