Xen 3.0 on Debian 3.1 (Sarge)

Discussion in 'Installation/Configuration' started by kbrown20, Apr 20, 2006.

  1. kbrown20

    kbrown20 New Member

    Hello,


    On your install guide "The Perfect Xen 3.0 Setup for Debian" page three you say to run these commands:


    I downloaded xen-3.0.1-src.tgz, (SUBSTITUTED WITH 3.0.2) then: done…


    cd /usr/src done…
    tar -xvzf xen-3.0.1-src.tgz (SUBSTITUTED WITH 3.0.2) done…


    cd xen-3.0.1/ SUBSTITUTED WITH 3.0.2, 3.0.1 does not exist) done…
    make world done…

    cd linux-2.6.12-xen0 (SUBSTITUTED WITH 2.6.16-xen, xen0 does not exist) done…

    ARCH=xen done… J
    export ARCH done… J
    make oldconfig Failed L
    make menuconfig Failed L

    When I ran the make oldconfig and menuconfig I recieved this:

    server2:/usr/src/xen-3.0.2-2# make oldconfig
    make: *** No rule to make target `oldconfig'. Stop.
    server2:/usr/src/xen-3.0.2-2# make menuconfig
    make: *** No rule to make target `menuconfig'. Stop.
    server2:/usr/src/xen-3.0.2-2#

    Did this fail due to the version conflict between the one that I am using and the one in your guide? What do I do next? Thanks.


    Kashif J. Brown SR
     
    Last edited: Apr 20, 2006
  2. falko

    falko Super Moderator Howtoforge Staff

    Do you see any errors when you run
    Code:
    make world
    ?
     
  3. zonerr

    zonerr New Member

    failed

    make oldconfig Failed L
    make menuconfig Failed L
    This is where things failed. I would rerun the install and try it again. without the unpacking because you've already done that.
     
  4. kbrown20

    kbrown20 New Member

    Falko,

    I did not recall seeing any errors at the end of the make world execution command but i will do it again and see. Shouldn't I see if there are any errors at the end of the compilation? If not where? Thanks.

    Kashif
     
  5. falko

    falko Super Moderator Howtoforge Staff

    Yes, there should be errors at the end.
     
  6. kbrown20

    kbrown20 New Member

    Falko,

    Here is the last page of the 'make world' command. I actually did a 'make -d world' to get extra debugging info and there were no errors (I actually got a "Successfully remade target file `world'."). I then ran the 'make oldconfig' and recieved the 'stop' error there. It looks like in the '/usr/src/xen-3.0.2-2/linux-2.6.16-xen/arch/xen/Makefile' there isn't a 'xen' directory and that is why the stop message comes up. Please advise. Thanks.
    *************************************************
    *************************************************
    * WARNING: Package 'latex' is required
    * to build Xen documentation
    *************************************************
    *************************************************
    Got a SIGCHLD; 1 unreaped children.
    Reaping winning child 0x0807eda8 PID 31541
    Removing child 0x0807eda8 PID 31541 from chain.
    Successfully remade target file `install-docs'.
    Finished prerequisites of target file `dist-docs'.
    Must remake target `dist-docs'.
    Got a SIGCHLD; 2 unreaped children.
    Putting child 0x0807ef38 (dist-docs) PID 31545 on the chain.
    Live child 0x0807ef38 (dist-docs) PID 31545
    Reaping winning child 0x0807ef38 PID 31545
    Removing child 0x0807ef38 PID 31545 from chain.
    Successfully remade target file `dist-docs'.
    Finished prerequisites of target file `dist'.
    Must remake target `dist'.
    install -d -m0755 /usr/src/xen-3.0.2-2/dist/check
    Putting child 0x0807f870 (dist) PID 31546 on the chain.
    Live child 0x0807f870 (dist) PID 31546
    Got a SIGCHLD; 1 unreaped children.
    Reaping winning child 0x0807f870 PID 31546
    install -m0644 ./COPYING /usr/src/xen-3.0.2-2/dist
    Live child 0x0807f870 (dist) PID 31547
    Got a SIGCHLD; 1 unreaped children.
    Reaping winning child 0x0807f870 PID 31547
    install -m0644 ./README /usr/src/xen-3.0.2-2/dist
    Live child 0x0807f870 (dist) PID 31548
    Got a SIGCHLD; 1 unreaped children.
    Reaping winning child 0x0807f870 PID 31548
    install -m0755 ./install.sh /usr/src/xen-3.0.2-2/dist
    Live child 0x0807f870 (dist) PID 31549
    Got a SIGCHLD; 1 unreaped children.
    Reaping winning child 0x0807f870 PID 31549
    install -m0755 tools/check/chk tools/check/check_* /usr/src/xen-3.0.2-2/dist/check
    Live child 0x0807f870 (dist) PID 31550
    Got a SIGCHLD; 1 unreaped children.
    Reaping winning child 0x0807f870 PID 31550
    Removing child 0x0807f870 PID 31550 from chain.
    Successfully remade target file `dist'.
    make[1]: Leaving directory `/usr/src/xen-3.0.2-2'
    Got a SIGCHLD; 1 unreaped children.
    Reaping winning child 0x08073680 PID 31080
    Removing child 0x08073680 PID 31080 from chain.
    Successfully remade target file `world'.
    server2:/usr/src/xen-3.0.2-2# cd linux-2.6.16
    bash: cd: linux-2.6.16: No such file or directory
    server2:/usr/src/xen-3.0.2-2# ls
    buildconfigs COPYING extras linux-2.6.16-xen patches ref-linux-2.6.16
    ChangeLog dist install.sh linux-2.6-xen-sparse pristine-linux-2.6.16 tools
    Config.mk docs linux-2.6.16.tar.bz2 Makefile README xen
    server2:/usr/src/xen-3.0.2-2# cd linux-2.6.16-xen/
    server2:/usr/src/xen-3.0.2-2/linux-2.6.16-xen# ARCH=xen
    server2:/usr/src/xen-3.0.2-2/linux-2.6.16-xen# export ARCH
    server2:/usr/src/xen-3.0.2-2/linux-2.6.16-xen# make oldconfig
    Makefile:439: /usr/src/xen-3.0.2-2/linux-2.6.16-xen/arch/xen/Makefile: No such file or directory
    make: *** No rule to make target `/usr/src/xen-3.0.2-2/linux-2.6.16-xen/arch/xen/Makefile'. Stop.


    Kashif
     
    Last edited: Apr 21, 2006
  7. falko

    falko Super Moderator Howtoforge Staff

    It must be somehow related to Xen 3.0.2. Have you tried with 3.0.1?
     
  8. kbrown20

    kbrown20 New Member

    Xen 3.0 on Debian 3.1

    Falko,

    I will try 3.0.1. Should I uninstall 3.0.2? If so can I just delete the folders? Thanks.

    Kashif
     
  9. falko

    falko Super Moderator Howtoforge Staff

    To be on the safe side, I'd install it on a fresh Debian.
     
  10. blicod

    blicod New Member

    Hello!

    I also got the same problem with version 3.0.2

    I installed 3.0.1 on an exact same machine a week ago without any problems, except those you mension falko.

    Now my big problem;) It seems like I can't find version 3.0.1 (tarball) and I can´t figure out the 3.0.2 issue.

    Any suggestions?

    /blicod
     
  11. falko

    falko Super Moderator Howtoforge Staff

  12. blicod

    blicod New Member

    haha... ridiculous easy.

    Anyway. Thanks for outstanding Howtos
     

Share This Page