After a lot of upgrading and with the new addition of Awstats in ISPconfig3 I tried setting stats as they should be for all websites (including the ones that will be created) Unfortunately I think I messed up everything. when trying to access domain.com/stats I am asked for a password which never goes through and when it does I get an Error 403 Forbidden. This happens to all websites new and old and with both Webalizer and Awstats. Is there any way I can remove both webalizer and awstats along with the configuration and set it up again properly (i need some quidelines on this also) It's a handy tool and a must to all my websites so I would really appreciate some help here. Thanks
Did you use the correct username? It is listed in the .htpasswd file that is referenced in the .htaccess file inside the stats directory. Also, did you take a look at the stats directory? Is it empty, or are there files?
I have the same problem I have set a password for the user admin, and when I type the correct user/pass combination I get a forbidden page. The user is admin and the pass is correct. I use awstats. The stats folder HAS files in it. UPDATE I forgot to mention, that when I disable the user/pass (through .htaccess) I can see the statistics
REPLY to my last UPDATE: Unfortunately I can not see stats even if I disable .htaccess The only different thing that I did from the guides and the manual is to enable ssl over ispconfig interface. In the error log of apache I get this: Code: File does not exist: /var/www/ispconfig/stats But I type in the browser address : http://www.somesite.gr/stats Is this a bug??
I found the solution Something is happening with the DirectoryIndex directive In /etc/apache2/mods-enabled/dir.conf I have : Code: <IfModule mod_dir.c> DirectoryIndex index.html index.cgi index.pl index.php index.xhtml index.htm </IfModule> But I must type the http://www.somesite.gr/stats/index.html to see the stats!!!!
This is my vhost. I didn't touch anything manually Code: <Directory /var/www/somesite.gr> AllowOverride None Order Deny,Allow Deny from all </Directory> <VirtualHost 1.2.3.4:80> DocumentRoot /var/www/somesite.gr/web ServerName somesite.gr ServerAlias www.somesite.gr ServerAdmin [email protected] ErrorLog /var/log/ispconfig/httpd/somesite.gr/error.log ErrorDocument 400 /error/400.html ErrorDocument 401 /error/401.html ErrorDocument 403 /error/403.html ErrorDocument 404 /error/404.html ErrorDocument 405 /error/405.html ErrorDocument 500 /error/500.html ErrorDocument 503 /error/503.html <Directory /var/www/somesite.gr/web> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> <Directory /var/www/clients/client2/web5/web> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> # suexec enabled SuexecUserGroup web5 client2 # Clear PHP settings of this website <FilesMatch "\.ph(p3?|tml)$"> SetHandler None </FilesMatch> # php as fast-cgi enabled <IfModule mod_fcgid.c> # SocketPath /tmp/fcgid_sock/ # IdleTimeout n (3600 seconds) # An idle fastcgi application will be terminated after IdleTimeout seconds. IdleTimeout 3600 # ProcessLifeTime n (7200 seconds) # A fastcgi application will be terminated if lifetime expired, even no error is detected. ProcessLifeTime 7200 # MaxProcessCount n (1000) # The max count of total fastcgi process count. # MaxProcessCount 1000 # DefaultMinClassProcessCount n (3) # The minimum number of fastcgi application instances for any one fastcgi application. # Idle fastcgi will not be killed if their count is less than n # Set this to 0, and tweak IdleTimeout DefaultMinClassProcessCount 0 # DefaultMaxClassProcessCount n (100) # The maximum number of fastcgi application instances allowed to run for # particular one fastcgi application. DefaultMaxClassProcessCount 100 # IPCConnectTimeout n (3 seconds) # The connect timeout to a fastcgi application. IPCConnectTimeout 8 # IPCCommTimeout n (20 seconds) # The communication timeout to a fastcgi application. Please increase this # value if your CGI have a slow initialization or slow respond. IPCCommTimeout 360 # BusyTimeout n (300 seconds) # A fastcgi application will be terminated if handing a single request # longer than busy timeout. BusyTimeout 300 </IfModule> <Directory /var/www/somesite.gr/web> AddHandler fcgid-script .php .php3 .php4 .php5 FCGIWrapper /var/www/php-fcgi-scripts/web5/.php-fcgi-starter .php Options +ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> <Directory /var/www/clients/client2/web5/web> AddHandler fcgid-script .php .php3 .php4 .php5 FCGIWrapper /var/www/php-fcgi-scripts/web5/.php-fcgi-starter .php Options +ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> F # add support for apache mpm_itk <IfModule mpm_itk_module> AssignUserId web5 client2 </IfModule> <IfModule mod_dav_fs.c> # DO NOT REMOVE THE COMMENTS! # IF YOU REMOVE THEM, WEBDAV WILL NOT WORK ANYMORE! # WEBDAV BEGIN # WEBDAV END </IfModule> </VirtualHost>
Do you maybe have another DirectoryIndex directive anywhere else in your Apache configuration? What's the output of Code: ls -la /var/www/somesite.gr/web/stats/ ?
This topic is the answer, just wanted to post it because I have the same problem, here. ls -la /var/www/somesite.gr/web/stats/ Nothing in there. Only a htaccess file. It contains the following. Code: AuthType Basic AuthName "Members Only" AuthUserFile /var/www/clients/client1/web2/.htpasswd_stats require valid-user Even I see, with my newbie skills, that there is something not right here. Where is the instruction for AWStats? BTW: Thanks for your help, Falko!
As I can remember I didn't Add any DirectoryIndex. The output of ls -al is : Code: drwxr-xr-x 2 root root 4096 Feb 19 00:30 . drwx--x--- 15 web5 client2 4096 Feb 16 21:08 .. -rw-r--r-- 1 root root 5877 Feb 19 00:30 awstats.somesite.gr.alldomains.html -rw-r--r-- 1 root root 5913 Feb 19 00:30 awstats.somesite.gr.allhosts.html -rw-r--r-- 1 root root 5284 Feb 19 00:30 awstats.somesite.gr.allrobots.html -rw-r--r-- 1 root root 5550 Feb 19 00:30 awstats.somesite.gr.browserdetail.html -rw-r--r-- 1 root root 5604 Feb 19 00:30 awstats.somesite.gr.errors404.html -rw-r--r-- 1 root root 5083 Feb 19 00:30 awstats.somesite.gr.keyphrases.html -rw-r--r-- 1 root root 5071 Feb 19 00:30 awstats.somesite.gr.keywords.html -rw-r--r-- 1 root root 5921 Feb 19 00:30 awstats.somesite.gr.lasthosts.html -rw-r--r-- 1 root root 5274 Feb 19 00:30 awstats.somesite.gr.lastrobots.html -rw-r--r-- 1 root root 5475 Feb 19 00:30 awstats.somesite.gr.osdetail.html -rw-r--r-- 1 root root 5217 Feb 19 00:30 awstats.somesite.gr.refererpages.html -rw-r--r-- 1 root root 5182 Feb 19 00:30 awstats.somesite.gr.refererse.html -rw-r--r-- 1 root root 4258 Feb 19 00:30 awstats.somesite.gr.session.html -rw-r--r-- 1 root root 5022 Feb 19 00:30 awstats.somesite.gr.unknownbrowser.html -rw-r--r-- 1 root root 5289 Feb 19 00:30 awstats.somesite.gr.unknownip.html -rw-r--r-- 1 root root 4996 Feb 19 00:30 awstats.somesite.gr.unknownos.html -rw-r--r-- 1 root root 19910 Feb 19 00:30 awstats.somesite.gr.urldetail.html -rw-r--r-- 1 root root 7024 Feb 19 00:30 awstats.somesite.gr.urlentry.html -rw-r--r-- 1 root root 7531 Feb 19 00:30 awstats.somesite.gr.urlexit.html -rwxr-xr-x 1 root root 117 Feb 17 22:25 .htaccess -rw-r--r-- 1 root root 74627 Feb 19 00:30 index.html
I just found out that there was another directive in the parent folder inside another .htaccess file. Thanks falco. MY BIG LESSON: "Always look the .htaccess files provided by CMS" (like Drupal, Wordpress, Joomla etc)
