Hi, i have installed a ispconfig 3 interface with this script (http://www.howtoforge.com/forums/showthread.php?t=51928). It all works fine but the web quota does not count. Traffic is count fine, but the web quota not. Here is a Screenshot: http://epvpimg.com/qoceh I hope somebody can help me, and sorry for my bad english :-( Cheers!
I had the same problem on my ISP-installations inside an OpenVZ container. It is a bug in an older openvz-kernel on the host node which has been fixed some month ago. But because openvz is developed on a redhat kernel the patches need really long time to be ported into the official debian kernel. But the people of the Proxmox project work much faster on that point than the debian devs. I switched the kernel used on the host node to Proxmox (which is based on debian) and now all problems I had with openVZ disappeared. Just follow the steps 'Adapt your sources.list' and 'Install Proxmox VE Kernel' on this wiki page to make it work like a charm. http://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Squeeze BUT: If you already had VEs configurated: Proxmox moves the directory /etc/vz/conf to /etc/vz/conf.org and creates a symlink from /etc/vz/conf to /etc/pve/openvz. So after installing Proxmox VE it seems that all your VEs are gone. Just copy the config files from conf.org back to conf and restart openvz # /etc/init.d/vz restart Afterwards everything is fine. My original post in the german forum: http://www.howtoforge.de/forum/29686-post23.html
Hi, I'm using a full dedicated Server with no virtuallisation but i have Migrated my ispconfig a few Day ago to this Server and i have cleared the Logs Maybe to much cleared or could a disabled php function be a Problem?
Edit: The Quota is still empty also if i add values in the monitor data. After a few minuten all in empty.
Did you install quota & quotatool (or quotatools, not sure) and edit the /etc/fstab like described in the tutorials here?
Hi, the discribed Install Script seems to has not installed the Quota right, becouse the fstab is not edited. I have found (https://gist.github.com/2016010) After i insert UUID=92bceda2-5ae4-4e3a-8748-b14da48fb297 / ext3 errors=remount-ro,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 1 the command "quotacheck -avugm" works fine. Before the change just this appears: quotacheck: Kann kein Dateisystem zum Prüfen finden oder Dateisystem nicht mit der Quota-Option gemountet. (translated: quotacheck: Can not find filesystem to check or filesystem not mounted with quota option.) Now my fstab looks like: Is that a good soulotion? The output of quotacheck -avugm was: In english:
Not sure if your fstab is 100% correctly, but as far as I see (check out this: http://www.howtoforge.com/perfect-server-debian-squeeze-with-bind-and-dovecot-ispconfig-3-p4, point 13) it should more look something like: Code: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/md1 / ext3 errors=remount-ro,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 1 /dev/md0 /boot ext2 defaults 0 2 /dev/sda2 none swap sw 0 0 /dev/sdb2 none swap sw 0 0 And do not forget to run these commands: mount -o remount / quotacheck -avugm quotaon -avug
MaddinXx, thank you very much now it works My idea was just stupid It counts now perfect but shows on every user "unlimited". Edit: After waiting a few Minutes (around 20 minutes) now it all works perfekt! Thank you very very much!
I have a problem. I install on multiserver. when try execute: sudo mount -o remount / see: mount: / not mounted or is it a wrong choice mi /etc/fstab Code: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/web03-root / ext4 errors=remount-ro,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 0 1 # /boot was on /dev/sda1 during installation UUID=f4da54ac-0bd7-4035-91c5-f941ca1bffc0 /boot ext2 defaults 0 2 /dev/mapper/web03-swap_1 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 thanks.
Hi I just tried switching to the Proxmox kernel, but the system won't boot anymore... 1) What could have been gone wrong? 2) I have access to a rescue system where I can mount all partitions e.g. /dev/md1 etc. - how can I revert to the old kernel so it can boot up again? //edit: OK I was able to boot with the old kernel, but still it would be cool to know what went wrong Would really appreciate your help
