In a case of root=/dev/ram0 real_root=/dev/sda2 No filesystem could mount root, tried: ext3 ext2... Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) http://imageplay.net/img/tya22288136/IMG0204A.jpg (real_root - real panic) The case of omitting real_root and using just root=/dev/sda2 VFS: Mounted root (ext2 filesystem) readonly on device 8:2 http://imageplay.net/img/tya22288134/IMG0203A.jpg - after the last line hangs without panic (alt+sysrq+b helps) List of all partitions (before kernel panic string): 0800 62522712 sda driver: sd 0801 204800 sda1 00000000-........0 0802 53928280 sda2 0...............0 0803 8388608 sda3 0........0 panic..... Pid: 1, comm: swapper/0 Not tainted 3.4.9-gentoo #7 But, firstly about my system (wgetpaste -c lspci) http://bpaste.net/show/50707/ Code: # lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port B) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port C) 00:0a.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port F) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS] (rev a2) 02:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 03:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12) 04:00.0 USB controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 01) 05:06.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) http://bpaste.net/show/50727/ http://bpaste.net/show/50703/ http://bpaste.net/show/50705/ .config : http://bpaste.net/show/50708/ grub.conf http://bpaste.net/show/50709/ /etc/fstab (May it be wrong without /shm?) http://bpaste.net/show/50710/ http://bpaste.net/show/50711/ http://bpaste.net/show/50721/ /etc/portage/make.conf http://bpaste.net/show/50712/ dmesg (right after boot from installation usb) http://bpaste.net/show/50726/ And in the hope of "Chapter 7", Linux Sea - my case could be some overlooked controller for my SSD Crucial M4 64. I need to clarify SSD is different with HDD in Kernel Setup? Or slightly.. mb AHCI+SATA+RAID is a must chain? As I have an AMD (asrock mb) I couldn't find where is my missed option PIIX (Intel PIIX or AMD analogy). RAM and root file system support seem to be not very far from working system: http://imgur.com/a/VSsHV - genkernel failed in the same way (VFS). That's why i began my long path make && make_modules I've done the kernel without initramfs [*] and 2 partitions in ext2 (/boot ,/ ) in order to lessen the possibility of fail (esp on SSD). I can't fild those two in kernel except for Marvell: Code: 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller 03:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12) I have no HDD only SSD and bootable flash minimal x86_64. Is an "PIIX4 PATA/SATA support" approprietable to me? Why bzImage is in arch/x86/boot/bzImage (x86_64 only links to x86). And what i'm doing - recompiling kernel again & again with replaceing with cp. Based on Pappy Kernel Seeds. ((Thanks to all you.. to this forum, the art of not being rude to ppl. with creative environment))
[solved] People who started the very posts of flame&blame accidentally (one who didn't) helped me , his name is fargred http://www.linux.org.ru/forum/linux-install/8333110?lastmod=1350140986725#comment-8334625 I had no this option. CONFIG_DEVTMPFS_MOUNT=y http://www.500images.com/uploads/716230865.jpg MY SYSTEM IS ALIVE! And the result is: http://bpaste.net/show/50920/ http://bpaste.net/show/50924/