ISPConfig install error: The PHP binary coming with ISPConfig does not work...

Hi!
I have been a faithful user of ISPConfig for months -- it's just GREAT!
However I have a problem when upgrading to the new version: the setup stopped after a few minutes with this error message:

Code:

./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory

The server runs SuSE 10, which I installed by faithfully following the "perfect setup" howto (I only had to change the ISPConfig 2.1.2 setup because of my x86_64 system).

I've read that I'm not the only one having this error, but I haven't found the solution. I've tried to run the setup a second time, but now it's asking me more questions, as though it were a new install and not an upgrade... And the same error shows up anyway!

Here are the last lines of the setup:

Code:

Configuring extensions
checking whether to enable LIBXML support... no
checking libxml2 install dir... no
checking for OpenSSL support... yes
checking for Kerberos support... no
checking for pkg-config... no
configure: error: Cannot find OpenSSL's libraries
ERROR: Could not configure PHP
cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!

Can anyone help?
Thanks!!

 

That's the problem. Did you somehow remove OpenSSL or parts of it?
What's the ouput of

Code:

uname -m

?

 

uname -m ==> x86_64

When I first installed ISPConfig (v. 2.1.2) on my x86_64 system, I had to remove the --with-openssl parameter in compile_aps/compile on l. 85. But I thought that this new version was compatible with x86_64?

yast2 tells me that openssl, openssl-32bit, openssl-devel, and php5-openssl are installed.

 

I checked the Perfect ISP Server SuSE Howto, and I noticed that openssl-devel-32bit should be installed. It was not installed on my system (which I can't explain), but anyway I installed it and then ISPConfig installed just fine !!

I was also VERY pleased to see that ISPConfig kept my configuration although I screwed the first upgrade attempt...

Anyway, once again a huge THANKS to you guys!!!

 

i have the same sort of problem. uname -m = i686

Code:

checking for MySQL support... yes
checking for specified location of the MySQL UNIX socket... no
checking for MySQL UNIX socket location... no
configure: error: Cannot find MySQL header files under /usr.
Note that the MySQL client library is not bundled anymore!
ERROR: Could not configure PHP
cd: error retrieving current directory: getcwd: cannot access parent directories
: No such file or directory
mv: cannot stat `binaries/aps.tar.gz': No such file or directory
mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
mv: cannot stat `binaries/cronolog': No such file or directory
mv: cannot stat `binaries/cronosplit': No such file or directory
mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
mv: cannot stat `binaries/zip': No such file or directory
mv: cannot stat `binaries/unzip': No such file or directory
tar: spamassassin.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `spamassassin': No such file or directory
tar: uudeview.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `uudeview': No such file or directory
tar: clamav.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `clamav': No such file or directory
tar: aps.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
ERROR: The PHP binary coming with ISPConfig does not work properly on your syste               m! The installation routine stops here! 

 

i cant seem to find it on my install cd...

 

Which distribution are you using?

 

insallation problem

I am using Centos 4.3 and i followed perfect setup for centos 4.3

i ended up with this error i tried twice can you help me pls during the installation zlib installation gave error the other steps was ok
thanks
to'
> make: *** [build_crypto] Error 1
> ERROR: Could not make OpenSSL
> cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
> mv: cannot stat `binaries/aps.tar.gz': No such file or directory
> mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 6: syntax error: unexpected end of file
-bash: make[1]:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory
> mv: cannot stat `binaries/clamav.tar.gz': No such file or directory
> mv: cannot stat `binaries/cronolog': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 3: syntax error: unexpected end of file
-bash: mv:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `binaries/cronosplit': No such file or directory
> mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory
> mv: cannot stat `binaries/zip': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 3: syntax error: unexpected end of file
-bash: mv:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `binaries/unzip': No such file or directory
> tar: spamassassin.tar.gz: Cannot open: No such file or directory
> tar: Error is not recoverable: exiting now
> tar: Child returned status 2
> tar: Error exit delayed from previous errors
> mv: cannot stat `spamassassin': No such file or directory
> tar: uudeview.tar.gz: Cannot open: No such file or directory
> tar: Error is not recoverable: exiting now
> tar: Child returned status 2
> tar: Error exit delayed from previous errors
> mv: cannot stat `uudeview': No such file or directory
-bash: command substitution: line 1: unexpected EOF while looking for matching `''
-bash: command substitution: line 7: syntax error: unexpected end of file
-bash: mv:: command not found
[root@server1 install_ispconfig]# tar: clamav.tar.gz: Cannot open: No such file or directory
-bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Error is not recoverable: exiting now
-bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Child returned status 2
-bash: tar:: command not found
[root@server1 install_ispconfig]# tar: Error exit delayed from previous errors
-bash: tar:: command not found
[root@server1 install_ispconfig]# mv: cannot stat `clamav': No such file or directory
> tar: aps.tar.gz: Cannot open: No such file or directory
> tar: Error is not recoverable: exiting now
> tar: Child returned status 2
> tar: Error exit delayed from previous errors
> ./setup2: line 794: ispconfig_tmp/php/bin/php: No such file or directory
> ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
>

 

There must have been another error before this. Please post it.