Hi, Yesterday, I installed ISP Config on a fresh Debian Jessie 8.2 installation (VPS) I used the tutorial "Automated installation on Debian" (which is really fantastic to do it faster !) Everything seemed to be ok during the process... but unfortunately, when I want to access to ISP Config with https MYIP:8080 , I have only the Apache Default Page. I restarted apache, and also the server. I check and isp.config.conf et ispconfig.vhost do exist. If someone would have an idea, I'd appreciate that ! Thanks per advance. Here are the details : ##### SERVER ##### IP-address (as per hostname): ***.***.***.*** IP-address(es) (as per ifconfig): ***.***.***.*** [INFO] ISPConfig is installed. ##### ISPCONFIG ##### ISPConfig version is 3.0.5.4p8 ##### VERSION CHECK ##### [INFO] php (cli) version is 5.6.13-0+deb8u1 [INFO] php-cgi (used for cgi php in default vhost!) is version 5.6.13-0+deb8u1 ##### PORT CHECK ##### ##### MAIL SERVER CHECK ##### ##### RUNNING SERVER PROCESSES ##### [INFO] I found the following web server(s): Apache 2 (PID 2644) [INFO] I found the following mail server(s): Postfix (PID 3122) [INFO] I found the following pop3 server(s): Dovecot (PID 2420) [INFO] I found the following imap server(s): Unknown process (init) (PID 1) [INFO] I found the following ftp server(s): PureFTP (PID 2929) ##### LISTENING PORTS ##### (only () Local (Address) [anywhere]:21 (2929/pure-ftpd) ***.***.***.***:53 (2403/named) [localhost]:53 (2403/named) [anywhere]:22 (2882/sshd) [anywhere]:25 (3122/master) [localhost]:953 (2403/named) [anywhere]:993 (1/init) [anywhere]:995 (2420/dovecot) [localhost]:10025 (3122/master) [anywhere]:587 (3122/master) [localhost]:11211 (2401/memcached) [anywhere]:110 (2420/dovecot) [anywhere]:143 (1/init) [anywhere]:465 (3122/master) *:*:*:*::*:21 (2929/pure-ftpd) *:*:*:*::*:53 (2403/named) *:*:*:*::*:22 (2882/sshd) *:*:*:*::*:25 (3122/master) *:*:*:*::*:953 (2403/named) *:*:*:*::*:443 (2644/apache2) *:*:*:*::*:993 (1/init) *:*:*:*::*:995 (2420/dovecot) *:*:*:*::*:3306 (2787/mysqld) *:*:*:*::*:587 (3122/master) [localhost]10 (2420/dovecot) [localhost]43 (1/init) *:*:*:*::*:8080 (2644/apache2) *:*:*:*::*:80 (2644/apache2) *:*:*:*::*:465 (3122/master) *:*:*:*::*:8081 (2644/apache2) ##### IPTABLES ##### Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-postfix-sasl tcp -- [anywhere]/0 [anywhere]/0 multiport dports 25 fail2ban-pureftpd tcp -- [anywhere]/0 [anywhere]/0 multiport dports 21 fail2ban-dovecot-pop3imap tcp -- [anywhere]/0 [anywhere]/0 multiport dport s 110,995,143,993 fail2ban-ssh tcp -- [anywhere]/0 [anywhere]/0 multiport dports 22 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-dovecot-pop3imap (1 references) target prot opt source destination RETURN all -- [anywhere]/0 [anywhere]/0 Chain fail2ban-postfix-sasl (1 references) target prot opt source destination RETURN all -- [anywhere]/0 [anywhere]/0 Chain fail2ban-pureftpd (1 references) target prot opt source destination RETURN all -- [anywhere]/0 [anywhere]/0 Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- [anywhere]/0 [anywhere]/0
Hi, In many cases I preffer do a clean installation. I used this tutorial: ISPConfig 3: Automated installation on Debian https://www.howtoforge.com/tutorial/ispconfig-install-script-debian/ But I used the expert install because I don't want use the default port 8080 for ISPconfig, I used other ones. And finally I use this other tutorial to install roundcube RoundCube webmail installation on Debian 8 (Jessie) https://www.howtoforge.com/tutorial/roundcube-installation-on-debian-8-jessie/ I hope that be usefull for you. bye
Thanks for your answer. I tried an instalation of ISPConfig (starting from Step 20) I made an update in fact cause it was already installed. Same result. I used standard mode because I had some errors with expert mode (amavis service and others) I m going to try again step by step. I will keep you in touch.
too many errors with expert mode... maybe cause I am on Jessie 8.2 ------- Creating/updating amavis user account... Job for amavis.service failed. See 'systemctl status amavis.service' and 'journalctl -xn' for details. invoke-rc.d: initscript amavis, action "start" failed. dpkg: error processing package amavisd-new (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: amavisd-new E: Sub-process /usr/bin/dpkg returned an error code (1) ------- Package libapache2-mod-fastcgi is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'libapache2-mod-fastcgi' has no installation candidate -------- Don't know what to do...
That package exists in non-free, update your apt sources: https://packages.debian.org/jessie/libapache2-mod-fastcgi
Thanks for your answer. unfortunately I think my sources are good. I tried with : #deb cdrom:[Debian GNU/Linux 8.0.0 _Jessie_ - Official amd64 NETINST Binary-1 20150425-12:50]/ jessie main deb http://ftp.us.debian.org/debian/ jessie main contrib non-free deb-src http://ftp.us.debian.org/debian/ jessie main contrib non-free deb http://security.debian.org/ jessie/updates main contrib non-free deb-src http://security.debian.org/ jessie/updates main contrib non-free and also : deb http://ftp.fr.debian.org/debian/ jessie main contrib non-free deb-src http://ftp.fr.debian.org/debian/ jessie main contrib non-free # Security deb http://security.debian.org/ jessie/updates main contrib non-free deb-src http://security.debian.org/ jessie/updates main contrib non-free # Backports deb http://ftp.debian.org/debian/ jessie-backports main contrib non-free But failed for both, still the same message :
run: apt-get update and try again. The "libapache2-mod-fastcgi" exists in the Debian Jessie repos as you can see here: https://packages.debian.org/jessie/libapache2-mod-fastcgi
Thanks till... I tried 8 times apt-get update and then apt-get install libapache2-mod-fastcgi php5-fpm with no success... I noticed that I have an error running apt-get upgrade Can it be related ? Thanks again for your help.
This can be related. Check the /var/log/mail.log for the exact error message why amavisd fails. The most common reason is a wrong or non fqdn hostname of the server.
I have no specific error when I run apt-get-upgrade in var/log/mail.log I have other errors but It's not at the moment I run the command apt-get-upgrade : Concerning hosts, the fact to edit host file, doesn't change the hostname. If I edit host file like that (I replaced my IP with XXX): I always have "scw-mattheoh" if I run hostname or hostname -f Indeed, the host name of my VPS server is defined in a panel from my provider. I thought to try with an ubuntu environment, but I would have prefered sucess with Debian ! :-/
Amavisd needs a fully qualified hostname. Change to something like server1.yourdomain.com in the controlpanel of your ISP so that "hostname -f" returns thsi full hostname.
Hi till, I managed to modify correctly my hostname. No more errors on amavis when I run apt-get update / upgrade... unfortuntely it didn't solve the problem for libapache2-mod-fastcgi very strange... Edit : I made a ticket to my hosting provider. He's going to watch... Wait and see
Here's his answer : So I have an incompatibility with the CPU type of my server... Don't know what to do. I have several solutions : - Change server - Use another linux distribution - Compile this libapache2-mod-fastcgi package by myself (but I really don't know how to do that !) Would you have an advice ? Thanks again for your help.
