I installed PHP 7 on CentOS 7 and ISPconfig 3.1 dev

I did this:

Code:

mkdir -p /opt/php-7.0.9
mkdir /usr/local/src/php5-build
cd /usr/local/src/php5-build
wget http://ca2.php.net/get/php-7.0.9.tar.bz2/from/this/mirror -O php-7.0.9.tar.bz2
tar jxf php-7.0.9.tar.bz2

cd php-7.0.9/

yum install gcc libxml2-devel pkgconfig openssl-devel bzip2-devel curl-devel libpng-devel libpng-devel libjpeg-devel libXpm-devel freetype-devel gmp-devel libmcrypt-devel mariadb-devel aspell-devel recode-devel httpd-devel libc-client-devel postgresql-devel libxslt-devel

./configure --prefix=/opt/php-7.0.9 --with-pdo-pgsql --with-zlib-dir --with-freetype-dir --enable-mbstring --with-libxml-dir=/usr --enable-soap --enable-calendar --with-curl --with-mcrypt --with-zlib --with-gd --with-pgsql --disable-rpath --enable-inline-optimization --with-bz2 --with-zlib --enable-sockets --enable-sysvsem --enable-sysvshm --enable-pcntl --enable-mbregex --enable-exif --enable-bcmath --with-mhash --enable-zip --with-pcre-regex --with-pdo-mysql --with-mysqli --with-mysql-sock=/var/run/mysqld/mysqld.sock --with-jpeg-dir=/usr --with-png-dir=/usr --enable-gd-native-ttf --with-openssl --with-fpm-user=www-data --with-fpm-group=www-data --with-libdir=lib64 --enable-ftp --with-imap --with-imap-ssl --with-kerberos --with-gettext --with-xmlrpc --with-xsl --enable-opcache --enable-fpm

make
make install

cp /usr/local/src/php5-build/php-7.0.9/php.ini-production /opt/php-7.0.9/lib/php.ini
cp /opt/php-7.0.9/etc/php-fpm.conf.default /opt/php-7.0.9/etc/php-fpm.conf
cp /opt/php-7.0.9/etc/php-fpm.d/www.conf.default /opt/php-7.0.9/etc/php-fpm.d/www.conf

nano /opt/php-7.0.9/etc/php-fpm.conf
[...]
pid = run/php-fpm.pid
[...]

nano /opt/php-7.0.9/etc/php-fpm.d/www.conf
[...]
listen = 127.0.0.1:8999
[...]

nano /etc/init.d/php-7.0.9-fpm
#! /bin/sh
### BEGIN INIT INFO
# Provides:          php-7.0.9-fpm
# Required-Start:    $all
# Required-Stop:     $all
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: starts php-7.0.9-fpm
# Description:       starts the PHP FastCGI Process Manager daemon
### END INIT INFO
php_fpm_BIN=/opt/php-7.0.9/sbin/php-fpm
php_fpm_CONF=/opt/php-7.0.9/etc/php-fpm.conf
php_fpm_PID=/opt/php-7.0.9/var/run/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF"
wait_for_pid () {
        try=0
        while test $try -lt 35 ; do
                case "$1" in
                        'created')
                        if [ -f "$2" ] ; then
                                try=''
                                break
                        fi
                        ;;
                        'removed')
                        if [ ! -f "$2" ] ; then
                                try=''
                                break
                        fi
                        ;;
                esac
                echo -n .
                try=`expr $try + 1`
                sleep 1
        done
}
case "$1" in
        start)
                echo -n "Starting php-fpm "
                $php_fpm_BIN $php_opts
                if [ "$?" != 0 ] ; then
                        echo " failed"
                        exit 1
                fi
                wait_for_pid created $php_fpm_PID
                if [ -n "$try" ] ; then
                        echo " failed"
                        exit 1
                else
                        echo " done"
                fi
        ;;
        stop)
                echo -n "Gracefully shutting down php-fpm "
                if [ ! -r $php_fpm_PID ] ; then
                        echo "warning, no pid file found - php-fpm is not running ?"
                        exit 1
                fi
                kill -QUIT `cat $php_fpm_PID`
                wait_for_pid removed $php_fpm_PID
                if [ -n "$try" ] ; then
                        echo " failed. Use force-exit"
                        exit 1
                else
                        echo " done"
                       echo " done"
                fi
        ;;
        force-quit)
                echo -n "Terminating php-fpm "
                if [ ! -r $php_fpm_PID ] ; then
                        echo "warning, no pid file found - php-fpm is not running ?"
                        exit 1
                fi
                kill -TERM `cat $php_fpm_PID`
                wait_for_pid removed $php_fpm_PID
                if [ -n "$try" ] ; then
                        echo " failed"
                        exit 1
                else
                        echo " done"
                fi
        ;;
        restart)
                $0 stop
                $0 start
        ;;
        reload)
                echo -n "Reload service php-fpm "
                if [ ! -r $php_fpm_PID ] ; then
                        echo "warning, no pid file found - php-fpm is not running ?"
                        exit 1
                fi
                kill -USR2 `cat $php_fpm_PID`
                echo " done"
        ;;
        *)
                echo "Usage: $0 {start|stop|force-quit|restart|reload}"
                exit 1
        ;;
esac


chmod 755 /etc/init.d/php-7.0.9-fpm
chkconfig php-7.0.9-fpm

nano /lib/systemd/system/php-7.0.9-fpm.service
[Unit]
Description=The PHP 7 FastCGI Process Manager
After=network.target

[Service]
Type=simple
PIDFile=/opt/php-7.0.9/var/run/php-fpm.pid
ExecStart=/opt/php-7.0.9/sbin/php-fpm --nodaemonize --fpm-config /opt/php-7.0.9/etc/php-fpm.conf
ExecReload=/bin/kill -USR2 $MAINPID

[Install]
WantedBy=multi-user.target

systemctl enable php-7.0.9-fpm.service
systemctl daemon-reload

systemctl start php-7.0.9-fpm.service

nano /opt/php-7.0.9/lib/php.ini
zend_extension=opcache.so
memory_limit = 1024M
post_max_size = 768M
upload_max_filesize = 512M

service httpd restart

Path to the PHP FastCGI binary: /opt/php-7.0.9/bin/php-cgi
Path to the php.ini directory: /opt/php-7.0.9/lib

Path to the PHP-FPM init script: /etc/init.d/php-7.0.9-fpm
Path to the php.ini directory: /opt/php-7.0.9/lib
Path to the PHP-FPM pool directory: /opt/php-7.0.9/etc/php-fpm.d

Now I get a 503 error when trying to use it.
Can anyone help please?

 

I wouldn't know how to test the binaries.

Code:

[Wed Aug 24 05:20:37.809997 2016] [proxy:error] [pid 17998] (111)Connection refused: AH00957: FCGI: attempt to connect to 127.0.0.1:9013 (*) failed
[Wed Aug 24 05:20:37.810118 2016] [proxy_fcgi:error] [pid 17998] [client 162.158.92.141:44253] AH01079: failed to make connection to backend: 127.0.0.1, referer: https://casso.la/forums/
[Wed Aug 24 05:22:02.317314 2016] [proxy:error] [pid 17999] (111)Connection refused: AH00957: FCGI: attempt to connect to 127.0.0.1:9013 (*) failed
[Wed Aug 24 05:22:02.317399 2016] [proxy_fcgi:error] [pid 17999] [client 69.162.124.237:33534] AH01079: failed to make connection to backend: 127.0.0.1, referer: https://main.casso.la
[Wed Aug 24 05:22:22.576334 2016] [proxy:error] [pid 18009] (111)Connection refused: AH00957: FCGI: attempt to connect to 127.0.0.1:9013 (*) failed
[Wed Aug 24 05:22:22.576444 2016] [proxy_fcgi:error] [pid 18009] [client 69.162.124.237:44267] AH01079: failed to make connection to backend: 127.0.0.1, referer: https://main.casso.la

An excerpt from error.log

 

I tried:

Code:

nano /opt/php-7.0.9/etc/php-fpm.d/www.conf
[...]
listen = 127.0.0.1:9013
[...]

But it didn't work

 

Thanks.
I undid the change I made regarding the listening port.

Here the output of your suggetion:

Code:

/etc/init.d/php-7.0.9-fpm restart
Gracefully shutting down php-fpm warning, no pid file found - php-fpm is not running ?
Starting php-fpm [24-Aug-2016 06:39:42] ERROR: [pool www] cannot get uid for user 'www-data'
[24-Aug-2016 06:39:42] ERROR: FPM initialization failed
failed

 

Thanks!
I get this though:
adduser: group 'www-data' does not exist

Also: could I get the right configuration for centos 7 for future installations?
You are also welcome to use any of the above in a php 7 centos 7 tutorial.

 

Sorry but it doesn't work. I consider this method as not usable.

I will try using the remi repo for installing php70.

 

This setup is much easier and just worked:

Code:

wget https://centos7.iuscommunity.org/ius-release.rpm
wget http://rpms.famillecollet.com/enterprise/remi-release-7.rpm
rpm -Uvh ius-release.rpm
rpm -Uvh remi-release-7*.rpm

yum install php70-php-bcmath php70-php-cli php70-php-common php70-php-fpm php70-php-gd php70-php-intl php70-php-json php70-php-mbstring php70-php-mcrypt php70-php-mysqlnd php70-php-opcache php70-php-pdo php70-php-pear php70-php-pecl-uploadprogress php70-php-pecl-zip php70-php-soap php70-php-xml php70-php-xmlrpc

nano /etc/opt/remi/php70/php-fpm.d/www.conf
[…]
listen = 127.0.0.1:9007
[…]

systemctl start php70-php-fpm
systemctl enable php70-php-fpm

nano /etc/opt/remi/php70/php.ini
[…]
memory_limit = 256M
max_execution_time = 300
upload_max_filesize = 256M
post_max_size = 256M
[…]

In ISPconfig adding the new PHP version (system):
Path to the PHP FCGI binary: /opt/remi/php70/root/usr/bin/php-cgi
Path to the php.ini directory: /etc/opt/remi/php70

Path to the PHP-FPM init script: php70-php-fpm
Path to the php.ini directory: /etc/opt/remi/php70
Path to the PHP-FPM pool directory: /etc/opt/remi/php70/php-fpm.d

service php70-php-fpm restart
service httpd restart