Hello members, Following multiple php (php-fpm & phpfastcgi) with ispconfig tutorial, I have compiled php-5.5.38 as php-fpm on ububtu 16 running with ispconfig 3.0.x . log /opt/php-5.5.38/var/log/php-fpm.log shows that it is loaded successfully fpm is running, pid 13606 ready to handle connection . But the web instance only calling the default php7 . I have also compile phpfcgi but no luck. Already configure the php-fpm & fastcgi at additional php section at ISPConfig and available at client section. Please advice how to make the compiled php work with ISPConfig.
Don't know the logic, but making all clients point to the compiled php-fpm now works. But this is not a solution at all, as users have their own choice of php version. Maybe associated, others domain calls the index.php of the very first web instance. Observed by phpinfo, others domain include the first instance in open_basedir, though at webdomain->options->open_basedir only points to associated web folder. Confused !! Can any one suggest ?
In your PHP-FPM settings you have a `Path to the PHP-FPM pool directory` - in that directory there should be a separate config file for each website using this php version; it sounds like your php daemon isn't looking at/finding those. Maybe run through all your setup again, something obviously isn't right. I setup a couple php versions for debian 8, with a few minor modifications but largely following the tutorials, so they should work. If you don't find anything yourself, maybe post the commands you used to compile the php versions, as well as the settings from Additional PHP Versions tabs and maybe your init script/systemd unit file.
Hi Jesse, Thanks for your valuable suggestion. The setting is php-fpm init path - /etc/init.d/php-fpm-5.3 php.ini path - /opt/php-5.3/lib php-fpm pool - /opt/php-5.3/etc/pool.d pool directory do have configuration file for clients like web1.conf , web2.conf etc... But the problem is , though web1 & web2 configured with php-fpm version 5.3 , the conf files in pool.d points php7 [web1] listen = /var/lib/php7.0-fpm/web1.sock listen.owner = web1 [web2] listen = /var/lib/php7.0-fpm/web2.sock listen.owner = web2 while the phpinfo in domain shows php5 as version. CONFUSING !! /opt/php-5.3/etc/php-fpm.conf has following include=/opt/php-5.3/etc/pool.d/*.conf pid = run/php-fpm.pid listen = 127.0.0.1:9000 I am clueless, please suggest how to fix this issue.
there is also /etc/apache2/conf-available/php7.0-fpm.conf <IfModule !mod_php7.c> # Enable http authorization headers SetEnvIfNoCase ^Authorization$ "(.+)" HTTP_AUTHORIZATION=$1 <FilesMatch ".+\.ph(p[3457]?|t|tml)$"> SetHandler "proxy:unix:/run/php/php7.0-fpm.sock|fcgi://localhost" </FilesMatch> <FilesMatch ".+\.phps$"> # Deny access to raw php sources by default # To re-enable it's recommended to enable access to the files # only in specific virtual host or directory Require all denied </FilesMatch> # Deny access to files without filename (e.g. '.php') <FilesMatch "^\.ph(p[3457]?|t|tml|ps)$"> Require all denied </FilesMatch> </IfModule>
In your first post you have php-5.5.38 installed under /opt/php-5.5.38/, but then you're using /opt/php-5.3/ in your additional php settings. Go back through the tutorial and make everything consistent - check the paths in all your commands to compile php, check your settings, and check all paths in your init script/systemd unit files.
Hi Jesse, thanks for your kind response. You are correct, I provided the php-5.3 config which I compiled recently. But here we are discussing php-5.5.38 settings. Sites are configured with this php-5.5.38 & not with php-5.3 Path to the PHP-FPM init script/etc/init.d/php-5.5.38-fpm Path to the php.ini directory/opt/php-5.5.38/lib Path to the PHP-FPM pool directory/opt/php-5.5.38/etc/pool.d similarly init path /etc/init.d/php-5.5.38-fpm having config php_fpm_BIN=/opt/php-5.5.38/sbin/php-fpm php_fpm_CONF=/opt/php-5.5.38/etc/php-fpm.conf php_fpm_PID=/opt/php-5.5.38/var/run/php-fpm.pid Please advise.
I think that's ok, actually, as I noticed a similar situation in debian8, I think that just puts the communication socket in the "wrong" directory, but both the php daemon and website config files pointed to the same path. For debian 8 the system php version is 5.6.24, and all the .sock files for websites get put under /var/lib/php5-fpm/, even for sites running php7 or a different php5 version. It might be nice (and worth an rfe?) to have a different path that doesn't include a php version in the name, but functionally it does not matter. I assume there are a lot more settings in the individual /opt/php-{version}/etc/pool.d/web#.conf files? There should be, including the open_basedir setting you mention above at https://www.howtoforge.com/communit...nstance-of-php-fpm-fastcgi.74054/#post-348328 In comment #1 and #2 you had different behavior/symptoms, where are things at right now? Maybe pick one specific site, go make absolutely certain it is set to the php mode and version you think it is (eg. often I change it as the client, but the change does not take effect, as I accidentally saved as a reseller earlier, so "client protection mode" is in effect, and it silently fails to change settings), then post the full config files /opt/php-#/etc/php-fpm.conf and /opt/php-#/etc/pool.d/web#.conf as I don't see anything wrong right offhand, and of course am assuming a little of it is correct. Another thought worth checking out is that the init script is getting run right, as maybe it's simply that the php daemon isn't getting restarted when it should. I think some folks have had a mixup of init.d/systemd config that caused problems. Try 'lsof /var/lib/php7.0-fpm/web#.sock' and you should see that php-fpm daemon is listening on each socket.
Hi Jesse, Thanks for your advise. Meanwhile I have completely removed php5.3 from server as well as from ispconfig to avoid further confusion. Now we have default php-7 & compiled php-5.5.38 (php-fpm & fastcgi). I'm working as admin now in ispconfig The client sites are configured with php-5.5.38, to be sure I make the site use default php and this remove web1.conf from pool.d ; then again reconfiguration with php-fpm version 5.5.38 . web1.conf recreated. /opt/php-5.5.38/etc/pool.d/web1.conf (here I purposely replace hostname with xxxx) [web1] listen = /var/lib/php7.0-fpm/web1.sock listen.owner = web1 listen.group = www-data listen.mode = 0660 user = web1 group = www-data pm = dynamic pm.max_children = 10 pm.start_servers = 2 pm.min_spare_servers = 1 pm.max_spare_servers = 5 pm.max_requests = 0 chdir = / env[HOSTNAME] = $HOSTNAME env[TMP] = /var/www/clients/client1/web1/tmp env[TMPDIR] = /var/www/clients/client1/web1/tmp env[TEMP] = /var/www/clients/client1/web1/tmp env[PATH] = /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin php_admin_value[open_basedir] = /var/www/clients/client1/web1/web:/var/www/clients/client1/web1/private:/var/www/clients/client1/web1/tmp:/var/www/xxxx.com/web:/srv/www/xxxxx.com/web:/usr/share/php5:/usr/share/php:/tmp:/usr/share/phpmyadmin:/etc/phpmyadmin:/var/lib/phpmyadmin php_admin_value[session.save_path] = /var/www/clients/client1/web1/tmp php_admin_value[upload_tmp_dir] = /var/www/clients/client1/web1/tmp php_admin_value[sendmail_path] = "/usr/sbin/sendmail -t -i -f [email protected]" only after starting /etc/init.d/php-5.5.38-fpm , following shows results and NOT WHEN default php7-fpm is running alone. # lsof /var/lib/php7.0-fpm/web1.sock COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME php-fpm 5322 root 8u unix 0xffff880fe72b8000 0t0 1927586 /var/lib/php7.0-fpm/web1.sock type=STREAM php-fpm 5323 web1 0u unix 0xffff880fe72b8000 0t0 1927586 /var/lib/php7.0-fpm/web1.sock type=STREAM php-fpm 5324 web1 0u unix 0xffff880fe72b8000 0t0 1927586 /var/lib/php7.0-fpm/web1.sock type=STREAM As you can see the no index.php is preset at web directory of this site # ls /var/www/clients/client1/web1/web favicon.ico index.html __info.php info.php robots.txt stats But when called by domain, a index.php is called which is belongs to another site/domain /var/www/clients/client3/web2/web/index.php STRANGE !! for your inspection here is /etc/init.d/php-5.5.38-fpm init script #! /bin/sh ### BEGIN INIT INFO # Provides: php-5.5.38-fpm # Required-Start: $all # Required-Stop: $all # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: starts php-5.5.38-fpm # Description: starts the PHP FastCGI Process Manager daemon ### END INIT INFO php_fpm_BIN=/opt/php-5.5.38/sbin/php-fpm php_fpm_CONF=/opt/php-5.5.38/etc/php-fpm.conf php_fpm_PID=/opt/php-5.5.38/var/run/php-fpm.pid php_opts="--fpm-config $php_fpm_CONF" wait_for_pid () { try=0 while test $try -lt 35 ; do case "$1" in 'created') if [ -f "$2" ] ; then try='' break fi ;; 'removed') if [ ! -f "$2" ] ; then try='' break fi ;; esac echo -n . try=`expr $try + 1` sleep 1 done } case "$1" in start) echo -n "Starting php-fpm " $php_fpm_BIN $php_opts if [ "$?" != 0 ] ; then echo " failed" exit 1 fi wait_for_pid created $php_fpm_PID if [ -n "$try" ] ; then echo " failed" exit 1 else echo " done" fi ;; stop) echo -n "Gracefully shutting down php-fpm " if [ ! -r $php_fpm_PID ] ; then echo "warning, no pid file found - php-fpm is not running ?" exit 1 fi kill -QUIT `cat $php_fpm_PID` wait_for_pid removed $php_fpm_PID if [ -n "$try" ] ; then echo " failed. Use force-exit" exit 1 else echo " done" echo " done" fi ;; force-quit) echo -n "Terminating php-fpm " if [ ! -r $php_fpm_PID ] ; then echo "warning, no pid file found - php-fpm is not running ?" exit 1 fi kill -TERM `cat $php_fpm_PID` wait_for_pid removed $php_fpm_PID if [ -n "$try" ] ; then echo " failed" exit 1 else echo " done" fi ;; restart) $0 stop $0 start ;; reload) echo -n "Reload service php-fpm " if [ ! -r $php_fpm_PID ] ; then echo "warning, no pid file found - php-fpm is not running ?" exit 1 fi kill -USR2 `cat $php_fpm_PID` echo " done" ;; *) echo "Usage: $0 {start|stop|force-quit|restart|reload}" exit 1 ;; esac and grep -v ";" /opt/php-5.5.38/etc/php-fpm.conf include=/opt/php-5.5.38/etc/pool.d/*.conf [global] pid = run/php-fpm.pid [www] user = www-data group = www-data listen = 127.0.0.1:9000 pm = dynamic pm.max_children = 5 pm.start_servers = 2 pm.min_spare_servers = 1 pm.max_spare_servers = 3 ps -efH | grep php is showing following root 29814 32348 0 15:42 pts/1 00:00:00 grep --color=auto php ispconf+ 26967 20204 0 15:38 ? 00:00:00 /usr/bin/php-cgi -d disable_classes= -d disable_functions= -d magic_quotes_gpc=off -d open_basedir= -d session.save_path=/usr/local/ispconfig/interface/temp ispconf+ 26968 26967 0 15:38 ? 00:00:00 /usr/bin/php-cgi -d disable_classes= -d disable_functions= -d magic_quotes_gpc=off -d open_basedir= -d session.save_path=/usr/local/ispconfig/interface/temp root 28497 1 0 15:40 ? 00:00:00 php-fpm: master process (/opt/php-5.5.38/etc/php-fpm.conf) web1 28498 28497 0 15:40 ? 00:00:00 php-fpm: pool web1 web1 28499 28497 0 15:40 ? 00:00:00 php-fpm: pool web1 www-data 28500 28497 0 15:40 ? 00:00:00 php-fpm: pool www www-data 28501 28497 0 15:40 ? 00:00:00 php-fpm: pool www Now if I restart both the php-fpm again , it shows different ( php-fpm: master process (/etc/php/7.0/fpm/php-fpm.conf) now added ). and sites configured with php-fpm 5.5.38 goes back to default php7 as witnessed by phpinfo. ps -efH | grep php root 11540 32348 0 16:02 pts/1 00:00:00 grep --color=auto php ispconf+ 6551 6542 0 15:55 ? 00:00:00 /usr/bin/php-cgi -d disable_classes= -d disable_functions= -d magic_quotes_gpc=off -d open_basedir= -d session.save_path=/usr/local/ispconfig/interface/temp ispconf+ 6552 6551 0 15:55 ? 00:00:00 /usr/bin/php-cgi -d disable_classes= -d disable_functions= -d magic_quotes_gpc=off -d open_basedir= -d session.save_path=/usr/local/ispconfig/interface/temp root 9108 1 0 15:59 ? 00:00:00 php-fpm: master process (/opt/php-5.5.38/etc/php-fpm.conf) web1 9109 9108 0 15:59 ? 00:00:00 php-fpm: pool web1 web1 9110 9108 0 15:59 ? 00:00:00 php-fpm: pool web1 www-data 9111 9108 0 15:59 ? 00:00:00 php-fpm: pool www www-data 9112 9108 0 15:59 ? 00:00:00 php-fpm: pool www root 10899 1 0 16:01 ? 00:00:00 php-fpm: master process (/etc/php/7.0/fpm/php-fpm.conf) web2 10901 10899 0 16:01 ? 00:00:00 php-fpm: pool web2 web2 10902 10899 0 16:01 ? 00:00:00 php-fpm: pool web2 www-data 10903 10899 0 16:01 ? 00:00:00 php-fpm: pool www www-data 10904 10899 0 16:01 ? 00:00:00 php-fpm: pool www Will it help if I install ispconfig with multiple php on debian 8 ?
In your init script, change: Code: # Required-Start: $remote_fs $network # Required-Stop: $remote_fs $network Did you create a systemd unit file? Ie. /lib/systemd/system/php-5.5.38-fpm.service should look like this from the example (https://www.howtoforge.com/tutorial/how-to-install-php-7-on-debian/): Code: [Unit] Description=The PHP 5.5.38 FastCGI Process Manager After=network.target [Service] Type=simple PIDFile=/opt/php-5.5.38/var/run/php-fpm.pid ExecStart=/opt/php-5.5.38/sbin/php-fpm --nodaemonize --fpm-config /opt/php-5.5.38/etc/php-fpm.conf ExecReload=/bin/kill -USR2 $MAINPID [Install] WantedBy=multi-user.target Then run Code: systemctl enable php-5.5.38-fpm.service systemctl daemon-reload Try stopping the init script and starting the systemd service: Code: /etc/init.d/php-5.5.38-fpm start systemctl start php-5.5.38-fpm.service And see what that gets you. I had a problem with changing/starting/stopping daemons until I realized I was mixing init.d and systemd commands (on the cli). Where do you see that called, apache logs? Would you have mixed using the ip address one some sites and '*' on other sites?
Hi Jesse, Here is a positive development. After being stick with numeric IP address ( and not *) to all clients the sites are reflecting proper php version. Have not written the systemd script, but settings are working even after server reboot. I don't have enough words to thank you and interested to know how IP address field affects the behavior ?
It affects which vhosts are considered when the web server finds the best match for a request. If you use an ip address for any site, then all requests that come in on that ip address will only match vhosts which have an ip address set - any vhosts using '*' are not even considered for that request.
