Hi there I accidentally forgot to install dovecot before installing ISPConfig 3 , but I managed to connect everything afterwords and it works well, but there is a little problem :/ I can send emails (in roundcube) but I can't receive them. This is my postfix's main.cf Code: https://dl.dropboxusercontent.com/u/30005219/main.cf Can you help me with this ? Thanks in advance
Thanks for your reply These are the messages i get. I have send email from "gvardia-cs at hotmail.com" to "troy at gvardia.me"
Hmm, you posted here in an ispconfig forum, but the mail paths mentioned in your log files are not from an ispconfig system. Emails on ISPConfig are always in: /var/vmail/domain.tld/user/ but your path is: /var/mail/vhosts/domain.tld/catch-all/tmp/1483721894.P23825.vmi97256.contabo.host Did you had mailboxes on that system before or did you had another control panel installed without doing a clean reinstall? ISPConfig just edits config files, it does not overwrite it, so if you start with an unclean system, then the resulting system will fail very likely.
Thanks once more for your reply I had some problems with postfix after installing ispconfig3, so i had to reinstall it , and now I'm stuck with this problem :/ What should I do in order to fix it ? Thanks once more
Remobe thes eline sform postfix main.cf, they are from a different crontrolapenl that you must have installed first: Code: # Virtual domain config virtual_mailbox_domains = /etc/postfix/virtual_domains virtual_mailbox_base = /var/mail/vhosts virtual_mailbox_maps = hash:/etc/postfix/vmailbox # Make sure you replace these UID:GID numbers virtual_minimum_uid = 5010 virtual_uid_maps = static:5010 virtual_gid_maps = static:5010 virtual_alias_maps = hash:/etc/postfix/virtual # TLS smtpd_use_tls = no smtpd_tls_security_level = may smtpd_tls_auth_only = yes smtpd_tls_key_file = /etc/postfix/myserver.key smtpd_tls_cert_file = /etc/postfix/server.crt smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom # SASL smtpd_sasl_type = dovecot broken_sasl_auth_clients = yes smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination, permit smtpd_relay_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination # Amavisd content_filter = amavisfeed:[127.0.0.1]:10024 ISPConfig can not work if you install it on a unclean server, that's why you had the postfix problems. Then download ispconfig again, unpack it and run the update.php script in the install folder. Let ispconfig reconfigure the services when the updater asks.
Thanks for your reply I have updated ispconfig and now i get this error when I try to login to roundcube : Code: Jan 7 16:35:02 vmi97256 sendmail[2513]: NOQUEUE: SYSERR(root): No local mailer defined Jan 7 16:35:02 vmi97256 sendmail[2513]: NOQUEUE: SYSERR(root): QueueDirectory (Q) option must be set Jan 7 16:35:02 vmi97256 dovecot: imap-login: Disconnected (disconnected before auth was ready, waited 0 secs): user=<>, rip=127.0.0.1, lip=127.0.0.1, secured, session=<sm7C4IJFBAB/AAAB> Jan 7 16:35:02 vmi97256 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=127.0.0.1, lip=127.0.0.1, secured, session=<0hnD4IJFCgB/AAAB> Jan 7 16:35:02 vmi97256 postfix/smtpd[2541]: connect from localhost.localdomain[127.0.0.1] Jan 7 16:35:02 vmi97256 postfix/smtpd[2541]: warning: SASL: Connect to private/auth failed: Connection refused Jan 7 16:35:02 vmi97256 postfix/smtpd[2541]: fatal: no SASL authentication mechanisms Jan 7 16:35:03 vmi97256 postfix/master[2025]: warning: process /usr/libexec/postfix/smtpd pid 2541 exit status 1 Jan 7 16:35:03 vmi97256 postfix/master[2025]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Jan 7 16:35:06 vmi97256 dovecot: imap-login: Disconnected (auth failed, 1 attempts in 4 secs): user=<[email protected]>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=<fO7F4IJFCAB/AAAB> Jan 7 16:36:06 vmi97256 postfix/smtpd[2610]: connect from bay004-omc4s18.hotmail.com[65.54.190.220] Jan 7 16:36:06 vmi97256 postfix/smtpd[2610]: warning: SASL: Connect to private/auth failed: Connection refused Jan 7 16:36:06 vmi97256 postfix/smtpd[2610]: fatal: no SASL authentication mechanisms Jan 7 16:36:07 vmi97256 postfix/master[2025]: warning: process /usr/libexec/postfix/smtpd pid 2610 exit status 1 Jan 7 16:36:07 vmi97256 postfix/master[2025]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling
Probably there are more errors in postfix main.cf and master.cf due to the unclean base setup. Which Linux distribution do you use? And please post main.cf as well as master.cf of your server.
Once more, thanks for your reply. I managed to login to roundcube, but i get this errors when I try to send email or receive one : Code: Jan 7 22:49:57 vmi97256 postfix/smtpd[26932]: connect from localhost.localdomain[127.0.0.1] Jan 7 22:49:57 vmi97256 postfix/smtpd[26932]: warning: SASL: Connect to private/auth failed: Connection refused Jan 7 22:49:57 vmi97256 postfix/smtpd[26932]: fatal: no SASL authentication mechanisms I'm Using Centos 7.3 I restarted saslauthd (and it is running), but i still get this errors. These are my main.cf and master.cf
remove the following lines from your master.cf: Code: amavisfeed unix - - n - 2 lmtp -o lmtp_data_done_timeout=1200 -o lmtp_send_xforward_command=yes flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${user}@${nexthop} (flags=... in 127.0.0.1:10025)
Thanks for your reply. When I try to update ispconfig3 so it rewrites files, everything is ok, except I get this error : Code: Job for amavisd.service failed because the control process exited with error code. See "systemctl status amavisd.service" and "journalctl -xe" for details. And full message is : Code: amavisd.service - Amavisd-new is an interface between MTA and content checkers. Loaded: loaded (/usr/lib/systemd/system/amavisd.service; enabled; vendor preset: disabled) Active: failed (Result: start-limit) since Sat 2017-01-14 00:22:38 CET; 14s ago Docs: http://www.ijs.si/software/amavisd/#doc Process: 29493 ExecStart=/usr/sbin/amavisd -c /etc/amavisd/amavisd.conf (code=exited, status=13) Main PID: 2241 (code=exited, status=0/SUCCESS) Failed to start Amavisd-new is an interface between MTA and content checkers.. Unit amavisd.service entered failed state. amavisd.service failed. amavisd.service holdoff time over, scheduling restart. start request repeated too quickly for amavisd.service Failed to start Amavisd-new is an interface between MTA and content checkers.. Unit amavisd.service entered failed state. amavisd.service failed. :/
