dear community, i setup my vps following -https://www.howtoforge.com/perfect-server-debian-10-buster-apache-bind-dovecot-ispconfig-3-1/ but i am facing some kind of error. i restarted my apache server but there are a error like [*closing connection].see picture below.--https://ibb.co/CM4YdRQ Apache/2.4.38 (Debian) my smpt server offline too.--https://ibb.co/pWv3SZf i didnt face any kind of error while installing. also my hosted site showing 503 error. i am new to this.want to learn.. thanks a lot..
Is there a visible problem symptom you have, or just see a "closing connection" message in a log file? Try pasting the relevant logs (in code tags) here. (Note you wouldn't get the 503 error on your site if the web server were not running.) Try restarting postfix, and see what errors show up (eg. in the mail log). Check the site's error log and see what you find.
How much RAM does your server has? And please run the test script and post the result: https://www.howtoforge.com/community/threads/please-read-before-posting.58408/
##### SERVER ##### IP-address (as per hostname): ***.***.***.*** [WARN] could not determine server's ip address by ifconfig [INFO] OS version is Debian GNU/Linux 10 (buster) [INFO] uptime: 21:39:27 up 23 min, 1 user, load average: 0.16, 0.22, 0.18 [INFO] memory: total used free shared buff/cache available Mem: 7.8Gi 2.0Gi 5.5Gi 86Mi 327Mi 5.5Gi Swap: 0B 0B 0B [INFO] systemd failed services status: UNIT LOAD ACTIVE SUB DESCRIPTION ● [email protected] loaded failed failed Postfix Mail Transport Agent (instance -) LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. [INFO] ISPConfig is installed. ##### ISPCONFIG ##### ISPConfig version is 3.2.7p1 ##### VERSION CHECK ##### [INFO] php (cli) version is 7.3.31-1~deb10u1 [INFO] php-cgi (used for cgi php in default vhost!) is version 7.3.31 ##### PORT CHECK ##### [WARN] Port 25 (SMTP server) seems NOT to be listening [WARN] Port 465 (SMTP server SSL) seems NOT to be listening [WARN] Port 25 (SMTP server) seems NOT to be listening ##### MAIL SERVER CHECK ##### [WARN] I found no "submission" entry in your postfix master.cf [INFO] this is not critical, but if you want to offer port 587 for smtp connections you have to enable this. [WARN] I found no "smtps" entry in your postfix master.cf [INFO] this is not critical, but if you want to offer SSL for smtp (not TLS) connections you have to enable this. ##### RUNNING SERVER PROCESSES ##### [INFO] I found the following web server(s): Apache 2 (PID 2111) [WARN] I could not determine which mail server is running. [INFO] I found the following pop3 server(s): Dovecot (PID 857) [INFO] I found the following imap server(s): Dovecot (PID 857) [INFO] I found the following ftp server(s): PureFTP (PID 1187) ##### LISTENING PORTS ##### (only () Local (Address) [anywhere]:110 (857/dovecot) [anywhere]:143 (857/dovecot) [anywhere]:21 (1187/pure-ftpd) ***.***.***.***:53 (888/named) [localhost]:53 (888/named) [anywhere]:22 (875/sshd) [localhost]:953 (888/named) [anywhere]:993 (857/dovecot) [anywhere]:995 (857/dovecot) [localhost]:10023 (638/postgrey) [localhost]:10024 (1246/amavisd-new) [localhost]:10026 (1246/amavisd-new) [localhost]:11211 (858/memcached) [localhost]10 (857/dovecot) [localhost]43 (857/dovecot) *:*:*:*::*:8080 (2111/apache2) *:*:*:*::*:80 (2111/apache2) *:*:*:*::*:8081 (2111/apache2) *:*:*:*::*:21 (1187/pure-ftpd) *:*:*:*::*:53 (888/named) *:*:*:*::*:22 (875/sshd) *:*:*:*::*:953 (888/named) *:*:*:*::*:443 (2111/apache2) *:*:*:*::*:993 (857/dovecot) *:*:*:*::*:995 (857/dovecot) *:*:*:*::*:10024 (1246/amavisd-new) *:*:*:*::*:10026 (1246/amavisd-new) *:*:*:*::*:3306 (1000/mysqld) ##### IPTABLES ##### Chain INPUT (policy DROP) target prot opt source destination ufw-before-logging-input all -- [anywhere]/0 [anywhere]/0 ufw-before-input all -- [anywhere]/0 [anywhere]/0 ufw-after-input all -- [anywhere]/0 [anywhere]/0 ufw-after-logging-input all -- [anywhere]/0 [anywhere]/0 ufw-reject-input all -- [anywhere]/0 [anywhere]/0 ufw-track-input all -- [anywhere]/0 [anywhere]/0 Chain FORWARD (policy DROP) target prot opt source destination ufw-before-logging-forward all -- [anywhere]/0 [anywhere]/0 ufw-before-forward all -- [anywhere]/0 [anywhere]/0 ufw-after-forward all -- [anywhere]/0 [anywhere]/0 ufw-after-logging-forward all -- [anywhere]/0 [anywhere]/0 ufw-reject-forward all -- [anywhere]/0 [anywhere]/0 ufw-track-forward all -- [anywhere]/0 [anywhere]/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ufw-before-logging-output all -- [anywhere]/0 [anywhere]/0 ufw-before-output all -- [anywhere]/0 [anywhere]/0 ufw-after-output all -- [anywhere]/0 [anywhere]/0 ufw-after-logging-output all -- [anywhere]/0 [anywhere]/0 ufw-reject-output all -- [anywhere]/0 [anywhere]/0 ufw-track-output all -- [anywhere]/0 [anywhere]/0 Chain ufw-before-logging-input (1 references) target prot opt source destination Chain ufw-before-logging-output (1 references) target prot opt source destination Chain ufw-before-logging-forward (1 references) target prot opt source destination Chain ufw-before-input (1 references) target prot opt source destination ACCEPT all -- [anywhere]/0 [anywhere]/0 ACCEPT all -- [anywhere]/0 [anywhere]/0 ctstate RELATED,ESTABLISHED ufw-logging-deny all -- [anywhere]/0 [anywhere]/0 ctstate INVALID DROP all -- [anywhere]/0 [anywhere]/0 ctstate INVALID ACCEPT icmp -- [anywhere]/0 [anywhere]/0 icmptype 3 ACCEPT icmp -- [anywhere]/0 [anywhere]/0 icmptype 11 ACCEPT icmp -- [anywhere]/0 [anywhere]/0 icmptype 12 ACCEPT icmp -- [anywhere]/0 [anywhere]/0 icmptype 8 ACCEPT udp -- [anywhere]/0 [anywhere]/0 udp spt:67 dpt:68 ufw-not-local all -- [anywhere]/0 [anywhere]/0 ACCEPT udp -- [anywhere]/0 ***.***.***.*** udp dpt:5353 ACCEPT udp -- [anywhere]/0 ***.***.***.*** udp dpt:1900 ufw-user-input all -- [anywhere]/0 [anywhere]/0 Chain ufw-before-output (1 references) target prot opt source destination ACCEPT all -- [anywhere]/0 [anywhere]/0 ACCEPT all -- [anywhere]/0 [anywhere]/0 ctstate RELATED,ESTABLISHED ufw-user-output all -- [anywhere]/0 [anywhere]/0 Chain ufw-before-forward (1 references) target prot opt source destination ACCEPT all -- [anywhere]/0 [anywhere]/0 ctstate RELATED,ESTABLISHED ACCEPT icmp -- [anywhere]/0 [anywhere]/0 icmptype 3 ACCEPT icmp -- [anywhere]/0 [anywhere]/0 icmptype 11 ACCEPT icmp -- [anywhere]/0 [anywhere]/0 icmptype 12 ACCEPT icmp -- [anywhere]/0 [anywhere]/0 icmptype 8 ufw-user-forward all -- [anywhere]/0 [anywhere]/0 Chain ufw-after-input (1 references) target prot opt source destination ufw-skip-to-policy-input udp -- [anywhere]/0 [anywhere]/0 udp dpt:137 ufw-skip-to-policy-input udp -- [anywhere]/0 [anywhere]/0 udp dpt:138 ufw-skip-to-policy-input tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:139 ufw-skip-to-policy-input tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:445 ufw-skip-to-policy-input udp -- [anywhere]/0 [anywhere]/0 udp dpt:67 ufw-skip-to-policy-input udp -- [anywhere]/0 [anywhere]/0 udp dpt:68 ufw-skip-to-policy-input all -- [anywhere]/0 [anywhere]/0 ADDRTYPE match dst-type BROADCAST Chain ufw-after-output (1 references) target prot opt source destination Chain ufw-after-forward (1 references) target prot opt source destination Chain ufw-after-logging-input (1 references) target prot opt source destination LOG all -- [anywhere]/0 [anywhere]/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW BLOCK] " Chain ufw-after-logging-output (1 references) target prot opt source destination Chain ufw-after-logging-forward (1 references) target prot opt source destination LOG all -- [anywhere]/0 [anywhere]/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW BLOCK] " Chain ufw-reject-input (1 references) target prot opt source destination Chain ufw-reject-output (1 references) target prot opt source destination Chain ufw-reject-forward (1 references) target prot opt source destination Chain ufw-track-input (1 references) target prot opt source destination Chain ufw-track-output (1 references) target prot opt source destination ACCEPT tcp -- [anywhere]/0 [anywhere]/0 ctstate NEW ACCEPT udp -- [anywhere]/0 [anywhere]/0 ctstate NEW Chain ufw-track-forward (1 references) target prot opt source destination Chain ufw-logging-deny (2 references) target prot opt source destination RETURN all -- [anywhere]/0 [anywhere]/0 ctstate INVALID limit: avg 3/min burst 10 LOG all -- [anywhere]/0 [anywhere]/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW BLOCK] " Chain ufw-logging-allow (0 references) target prot opt source destination LOG all -- [anywhere]/0 [anywhere]/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix "[UFW ALLOW] " Chain ufw-skip-to-policy-input (7 references) target prot opt source destination DROP all -- [anywhere]/0 [anywhere]/0 Chain ufw-skip-to-policy-output (0 references) target prot opt source destination ACCEPT all -- [anywhere]/0 [anywhere]/0 Chain ufw-skip-to-policy-forward (0 references) target prot opt source destination DROP all -- [anywhere]/0 [anywhere]/0 Chain ufw-not-local (1 references) target prot opt source destination RETURN all -- [anywhere]/0 [anywhere]/0 ADDRTYPE match dst-type LOCAL RETURN all -- [anywhere]/0 [anywhere]/0 ADDRTYPE match dst-type MULTICAST RETURN all -- [anywhere]/0 [anywhere]/0 ADDRTYPE match dst-type BROADCAST ufw-logging-deny all -- [anywhere]/0 [anywhere]/0 limit: avg 3/min burst 10 DROP all -- [anywhere]/0 [anywhere]/0 Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:21 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:22 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:25 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:53 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:80 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:110 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:143 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:443 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:465 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:587 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:993 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:995 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:3306 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:4190 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:8080 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 tcp dpt:8081 ACCEPT tcp -- [anywhere]/0 [anywhere]/0 multiport dports 40110:40210 ACCEPT udp -- [anywhere]/0 [anywhere]/0 udp dpt:53 Chain ufw-user-output (1 references) target prot opt source destination Chain ufw-user-forward (1 references) target prot opt source destination Chain ufw-user-logging-input (0 references) target prot opt source destination Chain ufw-user-logging-output (0 references) target prot opt source destination Chain ufw-user-logging-forward (0 references) target prot opt source destination Chain ufw-user-limit (0 references) target prot opt source destination LOG all -- [anywhere]/0 [anywhere]/0 limit: avg 3/min burst 5 LOG flags 0 level 4 prefix "[UFW LIMIT BLOCK] " REJECT all -- [anywhere]/0 [anywhere]/0 reject-with icmp-port-unreachable Chain ufw-user-limit-accept (0 references) target prot opt source destination ACCEPT all -- [anywhere]/0 [anywhere]/0 ##### LET'S ENCRYPT ##### [WARN] You have both certbot and acme.sh installed. This can lead to problems. Certbot: /usr/bin/certbot acme.sh: /root/.acme.sh/acme.sh
You should have posted the report in CODE tags. You seem to have made error in installing your system: Code: [WARN] You have both certbot and acme.sh installed. This can lead to problems. Apache problems may be caused by the above. If you have just installed your system and can reinstall easily, I would suggest doing that. Use this for installing: https://www.howtoforge.com/ispconfig-autoinstall-debian-ubuntu/ Do note this from the beginning of the instructions:
i reinstalled debian from my vps control panel then paste that code..it downloading ..i will let you know if face any problem.
Code: [Sat Jan 22 10:07:26.057635 2022] [fcgid:warn] [pid 21401:tid 139871934977792] (32)Broken pipe: [client 108.162.229.218:13758] mod_fcgid: ap_pass_brigade failed in han$ [Sat Jan 22 10:07:26.392312 2022] [fcgid:warn] [pid 21401:tid 139871096133376] (104)Connection reset by peer: [client 172.70.192.76:63454] mod_fcgid: ap_pass_brigade f$ [Sat Jan 22 10:07:26.467527 2022] [fcgid:warn] [pid 21401:tid 139871985334016] [client 172.70.84.68:33758] mod_fcgid: can't apply process slot for /var/www/php-fcgi-sc$ [Sat Jan 22 10:07:27.265274 2022] [fcgid:warn] [pid 21612:tid 139871557502720] [client 172.70.141.28:20142] mod_fcgid: can't apply process slot for /var/www/php-fcgi-s$ [Sat Jan 22 10:07:27.766757 2022] [fcgid:warn] [pid 21121:tid 139871674935040] [client 141.101.66.137:27590] mod_fcgid: can't apply process slot for /var/www/php-fcgi-$ [Sat Jan 22 10:07:27.858240 2022] [fcgid:warn] [pid 21401:tid 139871943370496] (32)Broken pipe: [client 172.70.85.172:23404] mod_fcgid: ap_pass_brigade failed in handl$ [Sat Jan 22 10:07:29.101063 2022] [fcgid:warn] [pid 21612:tid 139871574288128] [client 172.70.141.28:22566] mod_fcgid: can't apply process slot for /var/www/php-fcgi-s$ [Sat Jan 22 10:07:30.974578 2022] [fcgid:warn] [pid 21121:tid 139872220616448] [client 172.68.39.42:64272] mod_fcgid: can't apply process slot for /var/www/php-fcgi-sc$ [Sat Jan 22 10:07:31.438282 2022] [fcgid:warn] [pid 21401:tid 139871649789696] [client 198.41.229.18:14630] mod_fcgid: can't apply process slot for /var/www/php-fcgi-s$ [Sat Jan 22 10:07:33.273319 2022] [fcgid:warn] [pid 21612:tid 139871549110016] [client 172.70.84.68:54410] mod_fcgid: can't apply process slot for /var/www/php-fcgi-sc$ server working great.but now my website problem.i cant get ssl certificate.many tried many times last few days. also facing these kind of error
For Let's Encrypt issues, see https://www.howtoforge.com/community/threads/lets-encrypt-error-faq.74179/ For new installs, I would recommend using the autoinstaller: https://www.howtoforge.com/ispconfig-autoinstall-debian-ubuntu/
