the perfect server, also with ubuntu 22.04?

Discussion in 'General' started by janvl, Jul 22, 2022.

Tags:
Page 2 of 2
  1. Spaetzle

    Spaetzle Member HowtoForge Supporter

    Hi
    I tried to run the script. But there seems to be another issue. The script tries to read the postfix configuration which is not available on a master server ... so the script exits. But here is the output as far as it was generated:
    Code:
    ##### SERVER #####
IP-address (as per hostname): ***.***.***.***
[WARN] could not determine server's ip address by ifconfig
[INFO] OS version is Ubuntu 22.04.1 LTS

[INFO] uptime:  11:07:04 up  1:56,  1 user,  load average: 0.00, 0.00, 0.00

[INFO] memory:
               total        used        free      shared  buff/cache   available
Mem:           3.7Gi       258Mi       2.8Gi       3.0Mi       673Mi       3.3Gi
Swap:             0B          0B          0B

[INFO] systemd failed services status:
  UNIT            LOAD   ACTIVE SUB    DESCRIPTION
● apache2.service loaded failed failed The Apache HTTP Server

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

[INFO] ISPConfig is installed.

##### ISPCONFIG #####
ISPConfig version is 3.2.9


##### VERSION CHECK #####

[INFO] php (cli) version is 8.1.2-1ubuntu2.9
[INFO] php-cgi (used for cgi php in default vhost!) is version 8.1.2

##### PORT CHECK #####

[WARN] Port 8080 (ISPConfig) seems NOT to be listening
[WARN] Port 8081 (ISPConfig Apps) seems NOT to be listening
[WARN] Port 80 (Webserver) seems NOT to be listening
[WARN] Port 443 (Webserver SSL) seems NOT to be listening
[WARN] Port 143 (IMAP server) seems NOT to be listening
[WARN] Port 993 (IMAP server SSL) seems NOT to be listening
[WARN] Port 110 (POP3 server) seems NOT to be listening
[WARN] Port 995 (POP3 server SSL) seems NOT to be listening
[WARN] Port 25 (SMTP server) seems NOT to be listening
[WARN] Port 465 (SMTP server SSL) seems NOT to be listening
[WARN] Port 21 (FTP server) seems NOT to be listening
[WARN] Port 25 (SMTP server) seems NOT to be listening

##### MAIL SERVER CHECK #####

[WARN] I found no "smtp" entry in your postfix master.cf
[WARN] I found no "submission" entry in your postfix master.cf
[INFO] this is not critical, but if you want to offer port 587 for smtp connections you have to enable this.
[WARN] I found no "smtps" entry in your postfix master.cf
[INFO] this is not critical, but if you want to offer SSL for smtp (not TLS) connections you have to enable this.

##### RUNNING SERVER PROCESSES #####

[WARN] I could not determine which web server is running.
[WARN] I could not determine which mail server is running.
[WARN] I could not determine which pop3 server is running.
[WARN] I could not determine which imap server is running.
[WARN] I could not determine which ftp server is running.

##### LISTENING PORTS #####
(only           ()
Local           (Address)
***.***.***.***:53              (513/systemd-resolve)
[anywhere]:22           (606/sshd:)
[localhost]:11211               (573/memcached)
[localhost]:3306                (1390/mariadbd)
*:*:*:*::*:22           (606/sshd:)




##### IPTABLES #####
Chain INPUT (policy DROP)
target     prot opt source               destination
ufw-before-logging-input  all  --  [anywhere]/0            [anywhere]/0
ufw-before-input  all  --  [anywhere]/0            [anywhere]/0
ufw-after-input  all  --  [anywhere]/0            [anywhere]/0
ufw-after-logging-input  all  --  [anywhere]/0            [anywhere]/0
ufw-reject-input  all  --  [anywhere]/0            [anywhere]/0
ufw-track-input  all  --  [anywhere]/0            [anywhere]/0

Chain FORWARD (policy DROP)
target     prot opt source               destination
ufw-before-logging-forward  all  --  [anywhere]/0            [anywhere]/0
ufw-before-forward  all  --  [anywhere]/0            [anywhere]/0
ufw-after-forward  all  --  [anywhere]/0            [anywhere]/0
ufw-after-logging-forward  all  --  [anywhere]/0            [anywhere]/0
ufw-reject-forward  all  --  [anywhere]/0            [anywhere]/0
ufw-track-forward  all  --  [anywhere]/0            [anywhere]/0

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
ufw-before-logging-output  all  --  [anywhere]/0            [anywhere]/0
ufw-before-output  all  --  [anywhere]/0            [anywhere]/0
ufw-after-output  all  --  [anywhere]/0            [anywhere]/0
ufw-after-logging-output  all  --  [anywhere]/0            [anywhere]/0
ufw-reject-output  all  --  [anywhere]/0            [anywhere]/0
ufw-track-output  all  --  [anywhere]/0            [anywhere]/0
Chain ufw-after-forward (1 references)
target     prot opt source               destination

Chain ufw-after-input (1 references)
target     prot opt source               destination
ufw-skip-to-policy-input  udp  --  [anywhere]/0            [anywhere]/0            udp dpt:137
ufw-skip-to-policy-input  udp  --  [anywhere]/0            [anywhere]/0            udp dpt:138
ufw-skip-to-policy-input  tcp  --  [anywhere]/0            [anywhere]/0            tcp dpt:139
ufw-skip-to-policy-input  tcp  --  [anywhere]/0            [anywhere]/0            tcp dpt:445
ufw-skip-to-policy-input  udp  --  [anywhere]/0            [anywhere]/0            udp dpt:67
ufw-skip-to-policy-input  udp  --  [anywhere]/0            [anywhere]/0            udp dpt:68
ufw-skip-to-policy-input  all  --  [anywhere]/0            [anywhere]/0            ADDRTYPE match dst-type BROADCAST

Chain ufw-after-logging-forward (1 references)
target     prot opt source               destination
LOG        all  --  [anywhere]/0            [anywhere]/0            limit: avg 3/min burst 10 LOG flags 0 level 4 prefix
 "[UFW BLOCK] "

Chain ufw-after-logging-input (1 references)
target     prot opt source               destination
LOG        all  --  [anywhere]/0            [anywhere]/0            limit: avg 3/min burst 10 LOG flags 0 level 4 prefix
 "[UFW BLOCK] "

Chain ufw-after-logging-output (1 references)
target     prot opt source               destination

Chain ufw-after-output (1 references)
target     prot opt source               destination

Chain ufw-before-forward (1 references)
target     prot opt source               destination
ACCEPT     all  --  [anywhere]/0            [anywhere]/0            ctstate RELATED,ESTABLISHED
ACCEPT     icmp --  [anywhere]/0            [anywhere]/0            icmptype 3
ACCEPT     icmp --  [anywhere]/0            [anywhere]/0            icmptype 11
ACCEPT     icmp --  [anywhere]/0            [anywhere]/0            icmptype 12
ACCEPT     icmp --  [anywhere]/0            [anywhere]/0            icmptype 8
ufw-user-forward  all  --  [anywhere]/0            [anywhere]/0

Chain ufw-before-input (1 references)
target     prot opt source               destination
ACCEPT     all  --  [anywhere]/0            [anywhere]/0
ACCEPT     all  --  [anywhere]/0            [anywhere]/0            ctstate RELATED,ESTABLISHED
ufw-logging-deny  all  --  [anywhere]/0            [anywhere]/0            ctstate INVALID
DROP       all  --  [anywhere]/0            [anywhere]/0            ctstate INVALID
ACCEPT     icmp --  [anywhere]/0            [anywhere]/0            icmptype 3
ACCEPT     icmp --  [anywhere]/0            [anywhere]/0            icmptype 11
ACCEPT     icmp --  [anywhere]/0            [anywhere]/0            icmptype 12
ACCEPT     icmp --  [anywhere]/0            [anywhere]/0            icmptype 8
ACCEPT     udp  --  [anywhere]/0            [anywhere]/0            udp spt:67 dpt:68
ufw-not-local  all  --  [anywhere]/0            [anywhere]/0
ACCEPT     udp  --  [anywhere]/0            ***.***.***.***          udp dpt:5353
ACCEPT     udp  --  [anywhere]/0            ***.***.***.***      udp dpt:1900
ufw-user-input  all  --  [anywhere]/0            [anywhere]/0

Chain ufw-before-logging-forward (1 references)
target     prot opt source               destination

Chain ufw-before-logging-input (1 references)
target     prot opt source               destination

Chain ufw-before-logging-output (1 references)
target     prot opt source               destination

Chain ufw-before-output (1 references)
target     prot opt source               destination
ACCEPT     all  --  [anywhere]/0            [anywhere]/0
ACCEPT     all  --  [anywhere]/0            [anywhere]/0            ctstate RELATED,ESTABLISHED
ufw-user-output  all  --  [anywhere]/0            [anywhere]/0

Chain ufw-logging-allow (0 references)
target     prot opt source               destination
LOG        all  --  [anywhere]/0            [anywhere]/0            limit: avg 3/min burst 10 LOG flags 0 level 4 prefix
 "[UFW ALLOW] "

Chain ufw-logging-deny (2 references)
target     prot opt source               destination
RETURN     all  --  [anywhere]/0            [anywhere]/0            ctstate INVALID limit: avg 3/min burst 10
LOG        all  --  [anywhere]/0            [anywhere]/0            limit: avg 3/min burst 10 LOG flags 0 level 4 prefix
 "[UFW BLOCK] "

Chain ufw-not-local (1 references)
target     prot opt source               destination
RETURN     all  --  [anywhere]/0            [anywhere]/0            ADDRTYPE match dst-type LOCAL
RETURN     all  --  [anywhere]/0            [anywhere]/0            ADDRTYPE match dst-type MULTICAST
RETURN     all  --  [anywhere]/0            [anywhere]/0            ADDRTYPE match dst-type BROADCAST
ufw-logging-deny  all  --  [anywhere]/0            [anywhere]/0            limit: avg 3/min burst 10
DROP       all  --  [anywhere]/0            [anywhere]/0

Chain ufw-reject-forward (1 references)
target     prot opt source               destination

Chain ufw-reject-input (1 references)
target     prot opt source               destination

Chain ufw-reject-output (1 references)
target     prot opt source               destination

Chain ufw-skip-to-policy-forward (0 references)
target     prot opt source               destination
DROP       all  --  [anywhere]/0            [anywhere]/0

Chain ufw-skip-to-policy-input (7 references)
target     prot opt source               destination
DROP       all  --  [anywhere]/0            [anywhere]/0
Chain ufw-skip-to-policy-output (0 references)
target     prot opt source               destination
ACCEPT     all  --  [anywhere]/0            [anywhere]/0

Chain ufw-track-forward (1 references)
target     prot opt source               destination

Chain ufw-track-input (1 references)
target     prot opt source               destination

Chain ufw-track-output (1 references)
target     prot opt source               destination
ACCEPT     tcp  --  [anywhere]/0            [anywhere]/0            ctstate NEW
ACCEPT     udp  --  [anywhere]/0            [anywhere]/0            ctstate NEW

Chain ufw-user-forward (1 references)
target     prot opt source               destination

Chain ufw-user-input (1 references)
target     prot opt source               destination
ACCEPT     tcp  --  [anywhere]/0            [anywhere]/0            tcp dpt:22
ACCEPT     tcp  --  [anywhere]/0            [anywhere]/0            tcp dpt:80
ACCEPT     tcp  --  [anywhere]/0            [anywhere]/0            tcp dpt:443
ACCEPT     tcp  --  [anywhere]/0            [anywhere]/0            tcp dpt:3306
ACCEPT     tcp  --  [anywhere]/0            [anywhere]/0            tcp dpt:8080
ACCEPT     tcp  --  [anywhere]/0            [anywhere]/0            tcp dpt:8081
ACCEPT     udp  --  [anywhere]/0            [anywhere]/0            udp dpt:3306

Chain ufw-user-limit (0 references)
target     prot opt source               destination
LOG        all  --  [anywhere]/0            [anywhere]/0            limit: avg 3/min burst 5 LOG flags 0 level 4 prefix
"[UFW LIMIT BLOCK] "
REJECT     all  --  [anywhere]/0            [anywhere]/0            reject-with icmp-port-unreachable

Chain ufw-user-limit-accept (0 references)
target     prot opt source               destination
ACCEPT     all  --  [anywhere]/0            [anywhere]/0

Chain ufw-user-logging-forward (0 references)
target     prot opt source               destination

Chain ufw-user-logging-input (0 references)
target     prot opt source               destination

Chain ufw-user-logging-output (0 references)
target     prot opt source               destination

Chain ufw-user-output (1 references)
target     prot opt source               destination



##### LET'S ENCRYPT #####
Certbot is installed in /usr/bin/letsencrypt
    The command
    Code:
    php -v
    gives the following, which should be OK with UBUNTU 22.04:

    Code:
    PHP 8.1.2-1ubuntu2.9 (cli) (built: Oct 19 2022 14:58:09) (NTS)
Copyright (c) The PHP Group
Zend Engine v4.1.2, Copyright (c) Zend Technologies
    with Zend OPcache v8.1.2-1ubuntu2.9, Copyright (c), by Zend Technologies

    Regards
    Bernd
     
    Spaetzle, Dec 29, 2022
    #21
  2. Spaetzle

    Spaetzle Member HowtoForge Supporter

    OK.
    This problems seems to be solved.
    Apache tried to load the wrong php version. Following steps were necessary:
    Code:
    a2dismod php7.4
a2enmod php8.1
systemctl start apache2
    Now the Panel is accessible again.

    The only thing I do not like so far is the deprecation message when running ispconfig_update.sh --force

    Regards
    Bernd
     
    Last edited: Jan 4, 2023
    Spaetzle, Dec 29, 2022
    #22
  3. till

    till Super Moderator Staff Member ISPConfig Developer

    That's fine and nothing to worry about. PHP 8.1 tends to spit out all kinds of warnings for code that is working perfectly fine. They just decided that code that's fine for PHP 5 and 7.x is not good enough in their opinion for PHP 8.1 anymore ;)
     
    till, Dec 29, 2022
    #23
    ahrasis likes this.
Page 2 of 2

Share This Page