Hi, Was hoping you could help with a configuration error. Ubuntu 22.04 I have installed ISPConfig on Ubuntu 22.04 using the automated installer. Post install, I reviewed the base installation guide to ensure it corresponded correctly with my server configuration: sudo nano /etc/netplan/00-installer-config.yaml sudo nano /etc/hosts (settings on my server are now the same as the base install recommendations). ifconfig -a indicates correct local ip, netmask, broadcast (as per guide). route shows gateway as 192.168.0.1 ISPConfig Configuration. Created new reseller with mostly -1 limits, domain: example.com, webserver & nameserver: server1.example.com. (cannot see ns1.dingo.com ns2.dingo.com as selection(s) for nameserver 1 & 2 for this reseller account) Created DNS Zone for domain (dingo.com on server1.example.com) server: server1.example.com IPv4: wildcard *. domain: dingo.com. NS1: ns1.dingo.com NS2: ns2.dingo.com (tried creation of ns1.example.com & ns2.example.com with zone, same problem so deleted them and used ns1.dingo.com & ns2.dingo.com instead). SSL: yes. LETSENCRYPT: yes. Create new site (dingo.com) with auto www subdomain, self signed SSL cert (internal only) etc. Site & cert created however, when connecting to site, no green ISPConfig Welcome message indicating site has been successfully created, just get standard "unable to connect" message in browser. Please assist. Many Thanks.
Please run the test script and post the result: https://forum.howtoforge.com/threads/please-read-before-posting.58408/
Code: ##### SERVER ##### IP-address (as per hostname): ***.***.***.*** [WARN] could not determine server's ip address by ifconfig [INFO] OS version is Ubuntu 22.04.3 LTS [INFO] uptime: 20:07:13 up 6 min, 2 users, load average: 1.52, 2.89, 1.56 [INFO] memory: total used free shared buff/cache availabl e Mem: 1.9Gi 1.4Gi 83Mi 34Mi 416Mi 304M i Swap: 2.0Gi 1.5Gi 524Mi [INFO] systemd failed services status: UNIT LOAD ACTIVE SUB DESCRIPTION ● fail2ban.service loaded failed failed Fail2Ban Service LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. [INFO] ISPConfig is installed. ##### ISPCONFIG ##### ISPConfig version is 3.2.11p1 ##### VERSION CHECK ##### [INFO] php (cli) version is 8.1.27 [INFO] php-cgi (used for cgi php in default vhost!) is version 8.1.27 ##### PORT CHECK ##### ##### MAIL SERVER CHECK ##### ##### RUNNING SERVER PROCESSES ##### [INFO] I found the following web server(s): Apache 2 (PID 1170) [INFO] I found the following mail server(s): Postfix (PID 2194) [INFO] I found the following pop3 server(s): Dovecot (PID 1009) [INFO] I found the following imap server(s): Dovecot (PID 1009) [INFO] I found the following ftp server(s): PureFTP (PID 1162) ##### LISTENING PORTS ##### (only () Local (Address) [anywhere]:3306 (986/mariadbd) [anywhere]:143 (1009/dovecot) ***.***.***.***:53 (681/systemd-resolve) [anywhere]:4190 (1009/dovecot) [anywhere]:110 (1009/dovecot) [anywhere]:21 (1162/pure-ftpd) [anywhere]:22 (1052/sshd:) [anywhere]:25 (2194/master) [anywhere]:465 (2194/master) [localhost]:53 (894/named) [localhost]:11332 (1043/rspamd:) [localhost]:11333 (1043/rspamd:) [localhost]:11334 (1043/rspamd:) [localhost]:6379 (890/redis-server) [localhost]:10023 (1202/postgrey) [localhost]:953 (894/named) [anywhere]:587 (2194/master) [localhost]:11211 (855/memcached) [anywhere]:993 (1009/dovecot) [anywhere]:995 (1009/dovecot) [localhost]:631 (836/cupsd) ***.***.***.***:53 (894/named) *:*:*:*::*:3306 (986/mariadbd) [localhost]43 (1009/dovecot) *:*:*:*::*:10023 (1202/postgrey) *:*:*:*::*:80 (1170/apache2) *:*:*:*::*:4190 (1009/dovecot) [localhost]10 (1009/dovecot) *:*:*:*::*:21 (1162/pure-ftpd) *:*:*:*::*:22 (1052/sshd:) *:*:*:*::*:25 (2194/master) *:*:*:*::*:953 (894/named) *:*:*:*::*:465 (2194/master) *:*:*:*::*:631 (836/cupsd) *:*:*:*::*:443 (1170/apache2) *:*:*:*::**:*:*:*::*53 (894/named) *:*:*:*::*:587 (2194/master) *:*:*:*::*:11332 (1043/rspamd:) *:*:*:*::*:11333 (1043/rspamd:) *:*:*:*::*:11334 (1043/rspamd:) *:*:*:*::*:993 (1009/dovecot) *:*:*:*::*:995 (1009/dovecot) *:*:*:*::*:8081 (1170/apache2) *:*:*:*::*:8080 (1170/apache2) *:*:*:*::*:53 (894/named) *:*:*:*::*:6379 (890/redis-server) ##### IPTABLES ##### Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination ##### LET'S ENCRYPT ##### acme.sh is installed in /root/.acme.sh/acme.sh Note: ifconfig returns: enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.0.2.15 netmask 255.255.255.0 broadcast 10.0.2.255 inet6 fe80::a00:27ff:fe46:d216 prefixlen 64 scopeid 0x20<link> ether 08:00:27:46:d2:16 txqueuelen 1000 (Ethernet) RX packets 47261 bytes 25761152 (25.7 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 38969 bytes 10836358 (10.8 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 20191 bytes 2658204 (2.6 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 20191 bytes 2658204 (2.6 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I modified the following entries following examination of my initial post to correspond with output from ifconfig: Local IP: 10.0.2.15 (previously 192.168.0.100 - as base setup guide). Gateway: 10.0.2.2 (previously 192.168.0.10 - as base setup guide). All other post server installation/configuration settings remain unaltered. Many thanks Till.