I'm following the instructions on ubuntuguide.org for upgrading my Dapper Server to an Edgy Server. (There were no guides here, so I had to take the next best route!) I'd initially followed the "Perfect Install" walkthrough on here for getting Dapper set up. I took the advice at ubuntuguide.org for upgrading to Edgy - changed the sources and used aptitude dist-upgrade. It seems to be upgrading everything, not just the OS. So far it's asked me lots of questions about keeping my old conf files or replacing them with the new ones. I had questions about this on proftpd, mime and mysql server. Probably at least one more that I'm forgetting now. The other issue is with configuring courier. It keeps hanging on upgrading courier. Should I be concerned with either of these issues and if so, what steps will I need to take? Also, should I anticipate any problems with ISPConfig once it's done? (I'm not too worried about courier. So far I've been able to send mail out but I've not been able to configure my MX pointers correctly through Dyndns to get my incoming mailserver accepting anything. Courier is the least of my problems -- this is a locally hosted testing server only.) Bear in mind, I just set up the Dapper server a few weeks back, so I've barely broken it in and have never had to restart it. EDIT post upgrade: OK, nearly everything came out alright by always choosing "no" if it asked me about replacing config files. However, at the very end, it spat out the following: Code: Errors were encountered while processing: courier-authlib-userdb courier-base courier-authdaemon courier-imap courier-ssl courier-pop courier-pop-ssl courier-imap-ssl Suggestions as to what to do about this?
Which method did you use? I hope you are aware that sysvinit is no longer in use and upstart is now the method of choice. Also dont forget that you have to configure your X-server with Code: sudo dpkg-reconfigure xserver-xorg If you didn't do that or it didn't work, try this Code: gksu “update-manager -c -d” The package manager checks for both beta versions as edgy is still listed as such. That should fix any problems you have. Don't forget to update any necessary packages that you may need. The main problem most likely is the x server problem. References: http://digg.com/linux_unix/Ubuntu_Edgy_Upgrades_a_Disaster_for_Many http://www.howtogeek.com/howto/ubuntu/upgrading-ubuntu-from-dapper-to-edgy-with-update-manager/
Whoa, fun, it's like learning a foreign language all over again. My accent was always better than my vocabulary. I used Method B. bash didn't recognize gksudo or gedit. I have no idea what sysvinit or upstart is. xserver-xorg is not installed. All I had on the box is what Falko included in the Dapper server config. The only things I did from ubuntuguide are in this section. All told I think it went reasonably well using aptitude dist-upgrade, except for the courier issues, which weren't working all that well to begin with. It should be noted that I'm not using the desktop version. I've got no GUI to work with here.
Output of netstat -tap: Code: (No info could be read for "-p": geteuid()=1000 but you should be root.) Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:mysql *:* LISTEN - tcp 0 0 *:81 *:* LISTEN - tcp 0 0 192.168.1.100:domain *:* LISTEN - tcp 0 0 localhost.locald:domain *:* LISTEN - tcp 0 0 *:smtp *:* LISTEN - tcp 0 0 localhost.localdoma:953 *:* LISTEN - tcp 0 0 192.168.1.100:4695 adsl-(host-mask):mysql ESTABLISHED- tcp 0 0 192.168.1.100:4693 adsl-(host-mask):mysql ESTABLISHED- tcp 0 0 localhost.localdom:1857 localhost.localdoma:www TIME_WAIT - tcp 0 0 192.168.1.100:mysql adsl-(host-mask):1256 ESTABLISHED- tcp 0 0 localhost.localdom:2668 localhost.localdoma:ftp TIME_WAIT - tcp6 0 0 *:www *:* LISTEN - tcp6 0 0 *:ftp *:* LISTEN - tcp6 0 0 *:ssh *:* LISTEN - tcp6 0 0 *:smtp *:* LISTEN - tcp6 0 0 ip6-localhost:953 *:* LISTEN - tcp6 0 0 *:https *:* LISTEN - tcp6 0 148 ::ffff:192.168.1.10:ssh ::ffff:192.:unix-status ESTABLISHED- Mail error log: Code: Oct 15 15:18:28 (servername) imaplogin: DISCONNECTED, ip=[::ffff:209.132.114.210], time=0 Mail log: Code: Oct 29 23:59:25 (servername) postfix/master[16470]: daemon started -- version 2.3.3, configuration /etc/postfix Oct 30 06:55:44 (servername) postfix/smtpd[23565]: connect from 59-117-202-247.dynamic.hinet.net[59.117.202.247] Oct 30 06:55:46 (servername) postfix/smtpd[23565]: NOQUEUE: reject: RCPT from 59-117-202-247.dynamic.hinet.net[59.117.202.$ Oct 30 06:55:46 (servername) postfix/smtpd[23565]: lost connection after RCPT from 59-117-202-247.dynamic.hinet.net[59.117$ Oct 30 06:55:46 (servername) postfix/smtpd[23565]: disconnect from 59-117-202-247.dynamic.hinet.net[59.117.202.247] Oct 30 06:59:06 (servername) postfix/anvil[23570]: statistics: max connection rate 1/60s for (smtp:59.117.202.247) at Oct $ Oct 30 06:59:06 (servername) postfix/anvil[23570]: statistics: max connection count 1 for (smtp:59.117.202.247) at Oct 30 $ Oct 30 06:59:06 (servername) postfix/anvil[23570]: statistics: max cache size 1 at Oct 30 06:55:44 Oct 30 07:17:48 (servername) postfix/smtpd[23855]: connect from 218-167-64-29.dynamic.hinet.net[218.167.64.29] Oct 30 07:17:49 (servername) postfix/smtpd[23855]: NOQUEUE: reject: RCPT from 218-167-64-29.dynamic.hinet.net[218.167.64.2$ Oct 30 07:17:50 (servername) postfix/smtpd[23855]: lost connection after RCPT from 218-167-64-29.dynamic.hinet.net[218.167$ Oct 30 07:17:50 (servername) postfix/smtpd[23855]: disconnect from 218-167-64-29.dynamic.hinet.net[218.167.64.29] Oct 30 07:21:10 (servername) postfix/anvil[23857]: statistics: max connection rate 1/60s for (smtp:218.167.64.29) at Oct 3$ Oct 30 07:21:10 (servername) postfix/anvil[23857]: statistics: max connection count 1 for (smtp:218.167.64.29) at Oct 30 0$ Oct 30 07:21:10 (servername) postfix/anvil[23857]: statistics: max cache size 1 at Oct 30 07:17:48 Oct 30 09:10:37 (servername) postfix/smtpd[25605]: connect from localhost[127.0.0.1] Oct 30 09:10:37 (servername) postfix/smtpd[25605]: lost connection after CONNECT from localhost[127.0.0.1] Oct 30 09:10:37 (servername) postfix/smtpd[25605]: disconnect from localhost[127.0.0.1] Also of note: prior to the upgrade I had been able to log in to webmail through ISPConfig and send mails out. Now I cannot do so, am getting the following errors: Code: Warning: fsockopen() [function.fsockopen]: unable to connect to localhost:110 (Connection refused) in /home/admispconfig/ispconfig/web/webmail/inc/class.uebimiau_mail.php on line 66 Warning: Cannot modify header information - headers already sent by (output started at /home/admispconfig/ispconfig/web/webmail/inc/class.uebimiau_mail.php:66) in /home/admispconfig/ispconfig/web/webmail/msglist.php on line 64
many a problems upgrading from Dapper to Edgy, from hardware to software issues. I would do my research before dist-upgrade. maybe too late?
What happens when you try to restart Courier? Code: /etc/init.d/courier-pop restart /etc/init.d/courier-imap restart
Actually, I did a full restart, which brought courier back up, but it's still not accepting mail. Current netstat -tap is now: Code: Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:mysql *:* LISTEN 3 787/mysqld tcp 0 0 *:81 *:* LISTEN 4 145/ispconfig_http tcp 0 0 192.168.1.100:domain *:* LISTEN 4 394/named tcp 0 0 localhost.locald:domain *:* LISTEN 4 394/named tcp 0 0 *:smtp *:* LISTEN 1 5184/master tcp 0 0 localhost.localdoma:953 *:* LISTEN 4 394/named tcp6 0 0 *:imaps *:* LISTEN 3 653/couriertcpd tcp6 0 0 *:pop3s *:* LISTEN 3 688/couriertcpd tcp6 0 0 *:pop3 *:* LISTEN 3 668/couriertcpd tcp6 0 0 *:imap2 *:* LISTEN 3 633/couriertcpd tcp6 0 0 *:www *:* LISTEN 4 252/apache2 tcp6 0 0 *:ftp *:* LISTEN 1 5088/proftpd: (acc tcp6 0 0 *:ssh *:* LISTEN 3 970/sshd tcp6 0 0 *:smtp *:* LISTEN 1 5184/master tcp6 0 0 ip6-localhost:953 *:* LISTEN 4 394/named tcp6 0 0 *:https *:* LISTEN 4 252/apache2 tcp6 0 148 ::ffff:192.168.1.10:ssh ::ffff:192.168.1.2:1344 ESTABLISHED3 2458/sshd: (username) New Mail log: Code: Oct 31 03:37:05 (servername) postfix/smtpd[18038]: NOQUEUE: reject: RCPT from 61-216-80-74.dynamic.hinet.net[61.216.80$ Oct 31 03:37:06 (servername) postfix/smtpd[18038]: lost connection after RCPT from 61-216-80-74.dynamic.hinet.net[61.2$ Oct 31 03:37:06 (servername) postfix/smtpd[18038]: disconnect from 61-216-80-74.dynamic.hinet.net[61.216.80.74] Oct 31 03:40:26 (servername) postfix/anvil[18040]: statistics: max connection rate 1/60s for (smtp:61.216.80.74) at Oc$ Oct 31 03:40:26 (servername) postfix/anvil[18040]: statistics: max connection count 1 for (smtp:61.216.80.74) at Oct 3$ Oct 31 03:40:26 (servername) postfix/anvil[18040]: statistics: max cache size 1 at Oct 31 03:37:04 Oct 31 06:38:02 (servername) postfix/smtpd[20460]: connect from 220-139-249-179.dynamic.hinet.net[220.139.249.179] Oct 31 06:38:03 (servername) postfix/smtpd[20460]: NOQUEUE: reject: RCPT from 220-139-249-179.dynamic.hinet.net[220.13$ Oct 31 06:38:03 (servername) postfix/smtpd[20460]: lost connection after RCPT from 220-139-249-179.dynamic.hinet.net[2$ Oct 31 06:38:03 (servername) postfix/smtpd[20460]: disconnect from 220-139-249-179.dynamic.hinet.net[220.139.249.179] Oct 31 06:41:23 (servername)postfix/anvil[20462]: statistics: max connection rate 1/60s for (smtp:220.139.249.179) at$ Oct 31 06:41:23 (servername) postfix/anvil[20462]: statistics: max connection count 1 for (smtp:220.139.249.179) at Oc$ Oct 31 06:41:23 (servername) postfix/anvil[20462]: statistics: max cache size 1 at Oct 31 06:38:02 One thing that I did notice is that when I try to point the MX record to the server over at dyndns, it gets routed instead to the other box I've got here sharing the same IP.
I don't see any lins for Courier in your mail log, only Postfix... Can you restart Courier and post the error messages here, if there are any?
