hi, I compile ALSA as modules on my kernel 2.6-15-2, but for some weird reason, I can play songs but I can't not hear a thing, I did alsaconf, and I used alsamixer to turn up the volumes too, but it's still not working, can somebody please help me
Which distribution do you use? Which soundcard? Can you see anything related to this in the logs under /var/log, or any error messages during system bootup? You can see all bootup messages by running the command Code: dmesg
Freeing initrd memory: 3480k freed NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd7ce, last bus=7 PCI: Using MMCONFIG ACPI: Subsystem revision 20050902 ACPI-0339: *** Error: Looking up [Z00A] in namespace, AE_NOT_FOUND search_node c1462ca0 start_node c1462ca0 return_node 00000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: Embedded Controller [EC0] (gpe 29) PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 7, cardbus bridge: 0000:06:01.0 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 30000000-31ffffff MEM window: 34000000-35ffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: b0100000-b01fffff PREFETCH window: 30000000-31ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 18 (level, low) -> IRQ 18 Simple Boot Flag at 0x36 set to 0x1 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.1 -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode ACPI wakeup devices: AZAL RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC ACPI: (supports S0 S3 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 3480KiB [1 disk] into ram disk... <6>input: AT Translated Set 2 keyboard as /class/input/input0 done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 216k freed NET: Registered protocol family 1 SCSI subsystem initialized Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH6: chipset revision 4 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hdaMA, hdbMA _______________________________________________________________ _______________________________________________________________ I think that's the error, how do you fix this????
snd: version magic '2.6.15.2 PENTIUMM gcc-4.0' should be '2.6.15.2 PENTIUMM gcc-3.3' now it's that, it won't even show me anything? what can I do?
