Hi. I am having some issues with ispconfig. I installed it yesturday on a FRESH install of ubuntu 7.10 server edition. I followed the perfect server setup provided here for ispconfig and ubuntu 7.10. Everything installed fine. I am behind a router with all the required ports forwarded. I have two sites setup. I had them both working for about an hour until something happened with the virtual hosts in which whenever I go to one of the websites it takes me to the ispconfig login. When I go to the normal ispconfig login, which is http://www.(domainhere).com:81 it gives me a unable to connect error. I used to be getting a "192.168.1.103:80 has no virtualhosts" error. I somehow fixed the error by renaming the vhosts file to vhosts_old.conf and having the one with the ~ on the end to just the vhosts file. I have never seen the vhosts file that is time and date dated on my server. All my ips are set to my internal ip which is 192.168.1.103. I don't understand how there can be no virtual hosts when i see like 3! Here's my vhosts file: Code: ################################### # # ISPConfig vHost Configuration File # Version 1.0 # ################################### # NameVirtualHost 192.168.1.103:80 <VirtualHost 192.168.1.103:80> ServerName localhost ServerAdmin root@localhost DocumentRoot /var/www/sharedip </VirtualHost> # # ###################################### # Vhost: www.alessandrasouers.com:80 ###################################### # # <VirtualHost 192.168.1.103:80> ServerName www.alessandrasouers.com:80 ServerAdmin [email protected] DocumentRoot /var/www/web10/web ServerAlias www.alessandrasouers.com DirectoryIndex index.html index.htm index.php index.php5 index.php4 index.php3 index.shtml index.cgi index.pl index.jsp Default.htm default.htm ErrorLog /var/www/web10/log/error.log Alias /error/ "/var/www/web10/web/error/" ErrorDocument 400 /error/invalidSyntax.html ErrorDocument 401 /error/authorizationRequired.html ErrorDocument 403 /error/forbidden.html ErrorDocument 404 /error/fileNotFound.html ErrorDocument 405 /error/methodNotAllowed.html ErrorDocument 500 /error/internalServerError.html ErrorDocument 503 /error/overloaded.html AliasMatch ^/~([^/]+)(/(.*))? /var/www/web10/user/$1/web/$3 AliasMatch ^/users/([^/]+)(/(.*))? /var/www/web10/user/$1/web/$3 </VirtualHost> # # # ###################################### # Vhost: www.fbscomputer.com:80 ###################################### # # <VirtualHost 192.168.1.103:80> ServerName www.fbscomputer.com:80 ServerAdmin [email protected] DocumentRoot /var/www/web2/web ServerAlias www.fbscomputer.com DirectoryIndex index.html index.htm index.php index.php5 index.php4 index.php3 index.shtml index.cgi index.pl index.jsp Default.htm default.htm ScriptAlias /cgi-bin/ /var/www/web2/cgi-bin/ AddHandler cgi-script .cgi AddHandler cgi-script .pl ErrorLog /var/www/web2/log/error.log AddType application/x-httpd-php .php .php3 .php4 .php5 <Files *.php> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php3> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php4> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php5> SetOutputFilter PHP SetInputFilter PHP </Files> php_admin_flag safe_mode Off AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/web2/web/error/" ErrorDocument 400 /error/invalidSyntax.html ErrorDocument 401 /error/authorizationRequired.html ErrorDocument 403 /error/forbidden.html ErrorDocument 404 /error/fileNotFound.html ErrorDocument 405 /error/methodNotAllowed.html ErrorDocument 500 /error/internalServerError.html ErrorDocument 503 /error/overloaded.html AliasMatch ^/~([^/]+)(/(.*))? /var/www/web2/user/$1/web/$3 AliasMatch ^/users/([^/]+)(/(.*))? /var/www/web2/user/$1/web/$3 </VirtualHost> # # #
more Here's the meat of my apache2.conf: Code: ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # PidFile /var/run/apache2.pid # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> User www-data Group www-data # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The default is 'Full' which sends information about the OS-Type # and compiled in modules. # Set to one of: Full | OS | Minor | Minimal | Major | Prod # where Full conveys the most information, and Prod the least. # ServerTokens Full # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_<error>.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_<error>.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /usr/share/apache2/error/include/ files and copying them to /your/include/path/, # even on a per-VirtualHost basis. The default include files will display # your Apache version number and your ServerAdmin email address regardless # of the setting of ServerSignature. # # The internationalized error documents require mod_alias, mod_include # and mod_negotiation. To activate them, uncomment the following 30 lines. # Alias /error/ "/usr/share/apache2/error/" # # <Directory "/usr/share/apache2/error"> # AllowOverride None # Options IncludesNoExec # AddOutputFilter Includes html # AddHandler type-map var # Order allow,deny # Allow from all # LanguagePriority en cs de es fr it nl sv pt-br ro # ForceLanguagePriority Prefer Fallback # </Directory> # # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ <Directory /var/www/sharedip> Options +Includes -Indexes AllowOverride None AllowOverride Indexes AuthConfig Limit FileInfo Order allow,deny Allow from all <Files ~ "^\.ht"> Deny from all </Files> </Directory> ###############ispconfig_log############### LogFormat "%v||||%b||||%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined_ispconfig CustomLog "|/root/ispconfig/cronolog --symlink=/var/log/httpd/ispconfig_access_log /var/log/httpd/ispconfig_access_log_%Y_%m_%d" combined_ispconfig <Directory /var/www/*/web> Options +Includes -Indexes AllowOverride None AllowOverride Indexes AuthConfig Limit FileInfo Order allow,deny Allow from all <Files ~ "^\.ht"> Deny from all </Files> </Directory> <Directory /var/www/*/user/*/web> Options +Includes -Indexes AllowOverride None AllowOverride Indexes AuthConfig Limit FileInfo Order allow,deny Allow from all <Files ~ "^\.ht"> Deny from all </Files> </Directory> <Directory /var/www/*/cgi-bin> Options ExecCGI -Indexes AllowOverride None AllowOverride Indexes AuthConfig Limit FileInfo Order allow,deny Allow from all <Files ~ "^\.ht"> Deny from all </Files> </Directory> Include /etc/apache2/vhosts/Vhosts_ispconfig.conf
The ISPConfig login has nothing to do with the apache webserver that runs your websites. I guess that you changed the port of the ISPConfig webserver. Please have a look at the file /root/ispconfig/httpd/conf/httpd.conf and set the port to 81 again. Then restart ISPConfig and your apache webserver.
idiot mistake Hi. If found the issue. On my linksys router, which runs dd-wrt, I port forwarded from 80to81 in one listing of it. I saw that and forwarded them seperatly and it fixed my problem. i was doing the same thing to 21to22 where i couldn't access ftp externally. the issue is now solved. Leason learned: forward your ports correctly. sorry for the waste of time/server space/window space.
