Hello I tried to follow the tutorial: http://www.howtoforge.com/openfiler-2.99-active-passive-with-corosync-pacemaker-and-drbd The tutorial is great and I tried to follow step by step but I didn't get it to work. running crm_mon I get the following output: Code: Attempting connection to the cluster... ============ Last updated: Tue May 15 10:18:32 2012 Stack: openais Current DC: cluster1 - partition with quorum Version: 1.1.2-c6b59218ee949eebff30e837ff6f3824ed0ab86b 2 Nodes configured, 2 expected votes 4 Resources configured. ============ Online: [ cluster2 cluster1 ] Resource Group: g_services lvmdata (ocf::heartbeat:LVM): Started cluster2 openfiler (lsb:openfiler): Stopped ClusterIP (ocf::heartbeat:IPaddr2): Stopped iscsi (lsb:iscsi-target): Stopped samba (lsb:smb): Stopped nfs (lsb:nfs): Stopped nfslock (lsb:nfslock): Stopped Master/Slave Set: ms_g_drbd Masters: [ cluster2 ] Slaves: [ cluster1 ] Failed actions: nfs-lock_start_0 (node=cluster1, call=16, rc=1, status=complete): unknown e I misspelled the corosync command: Code: order o_g_servicesafter_g_drbd inf: ms_g_drbd:promote g_services:start I've read in one of the comments that it was supposed to be: Code: order o_g_services_after_g_drbd inf: ms_g_drbd:promote g_services:start how do I correct it? here is the output of the crm configure show command: Code: node cluster1 node cluster2 primitive ClusterIP ocf:heartbeat:IPaddr2 \ params ip="128.1.8.101" cidr_netmask="32" \ op monitor interval="30s" primitive MetaFS ocf:heartbeat:Filesystem \ params device="/dev/drbd0" directory="/meta" fstype="ext3" primitive drbd_data ocf:linbit:drbd \ params drbd_resource="data" \ op monitor interval="15s" primitive drbd_meta ocf:linbit:drbd \ params drbd_resource="meta" \ op monitor interval="15s" primitive iscsi lsb:iscsi-target primitive lvmdata ocf:heartbeat:LVM \ params volgrpname="data" primitive nfs lsb:nfs primitive nfs-lock lsb:nfslock primitive nfslock lsb:nfslock primitive openfiler lsb:openfiler primitive samba lsb:smb group g_drbd drbd_meta drbd_data group g_services lvmdata openfiler ClusterIP iscsi samba nfs nfslock ms ms_g_drbd g_drbd \ meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true" colocation c_g_services_on_g_drbd inf: g_services ms_g_drbd:Master order o_g_servicesafter_g_drbd inf: ms_g_drbd:promote g_services:start property $id="cib-bootstrap-options" \ dc-version="1.1.2-c6b59218ee949eebff30e837ff6f3824ed0ab86b" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ stonith-enabled="false" \ no-quorum-policy="ignore" rsc_defaults $id="rsc-options" \ resource-stickiness="100" also notice that the first two lines of the crm configure show are different from the expected output, I get: Code: node cluster1 node cluster2 instead of: node filer01 \ attributes standby="off" node filer02 \ attributes standby="off" Also I can't access the openfiler web interface. Thank you in advance Jera
No puedes acceder a la interface de openfiler porque el recurso ClusterIP esta parado. El problema esta en el recurso nfslock que no funciona. Creo que como ambos recursos esta agrupados en g_services si uno no arranca tampo lo hace el otro. o_g_services_after_g_drbd = o_g_servicesafter_g_drbd. Esto solo es el nombre del recurso y puedes poner lo que tu quieras. A mi tampoco me funciona el recurso nfslock, si consigues arreglarlo avisame. Saludos y disculpa por no contestarte en inglés.
Thank you antram Hi Thank you for your reply, and I do understand Spanish, no problem. I will investigate what you said, and if I get anywhere I'll post it on the forum. Thanks again jeraisel