I have looked over the forums and did not find anything that would fix my problem what I am seeing with Webalizer is that Usage by country shows unresolved/unknown. I have the server on behind a firewall using nat. All the stats show up right but this.. I have looked at /etc/webalizer.conf and I do have the dns_cache.db file listed and its set at 10. Server has full access to the internet. Nothing is being blocked outgoing. www.domain.com/stats works fine I just get Usage by country unresolved/unknown. Please help thanks.
Looks like it cannot access the outside DNS servers. What's in /etc/resolv.conf? Do you have bind running locally?
I do have bind running and it works great I use it for one of my dns servers. Here is the output from /etc/resolv.conf nameserver 10.11.1.5 nameserver 4.2.2.1 I can run nslookup on the local dns server and I get an output of zone file information I have added to the server. > ls -d domain.com [domain.com] domain.com. SOA domain.com. admin.domain.com. (20070 13001 28800 7200 604800 86400) domain.com. A 10.11.1.5 domain.com. NS domain.com. www A 10.11.1.5 www MX 10 www.domain.com. domain.com. SOA domain.com. admin.domain.com.. (20070 13001 28800 7200 604800 86400) domain.com. was placed for posting in place of my real domain. > But as you can see its running and in place I can run updates on the server yum update and so on they all use host names to get the updates. Lan is not blocked any access to the internet.
The nameserver IP's do look like local IP's and do not point to a valid nameserver. What happens if you do e.g. (from commandline) Code: dig google.com Because your testing here only shows your local Bind server resolves for it's own internal network. With the dig google.com you should at least see the ANSWER section like: Code: ;; ANSWER SECTION: google.com. 300 IN A 64.233.167.99 google.com. 300 IN A 64.233.187.99 google.com. 300 IN A 72.14.207.99
It looks like your server only resolves the zone it is hosting itself. if you try this command what output do you get? Code: dig -x 72.14.207.99 Update: martinfst was faster
Looks like your right. its only looking at it self how do I fix this.. [root@www ~]# dig google.com ;; reply from unexpected source: 10.11.1.5#53, expected 4.2.2.1#53 ;; Warning: ID mismatch: expected ID 9856, got 55525 ; <<>> DiG 9.3.1 <<>> google.com ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 9856 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;google.com. IN A ;; Query time: 2169 msec ;; SERVER: 10.11.1.5#53(10.11.1.5) ;; WHEN: Wed Jan 31 08:45:26 2007 ;; MSG SIZE rcvd: 28
I changed my dns servers to nameserver 68.94.156.1 nameserver 68.94.157.1 ~ now I am not getting any responce. I am using m0n0wall ruleset is TCP DMZ net * WAN address *
I think I found the problem m0n0wall was dropping ICMP and UDP packets. to the wan interface I allowed them and I was able to get a response. dig google.com ; <<>> DiG 9.3.1 <<>> google.com ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 48340 ;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 4, ADDITIONAL: 4 ;; QUESTION SECTION: ;google.com. IN A ;; ANSWER SECTION: google.com. 8 IN A 64.233.187.99 google.com. 8 IN A 72.14.207.99 google.com. 8 IN A 64.233.167.99 ;; AUTHORITY SECTION: google.com. 313660 IN NS ns2.google.com. google.com. 313660 IN NS ns3.google.com. google.com. 313660 IN NS ns4.google.com. google.com. 313660 IN NS ns1.google.com. ;; ADDITIONAL SECTION: ns1.google.com. 314003 IN A 216.239.32.10 ns2.google.com. 340571 IN A 216.239.34.10 ns3.google.com. 340571 IN A 216.239.36.10 ns4.google.com. 340571 IN A 216.239.38.10 ;; Query time: 11 msec ;; SERVER: 68.94.156.1#53(68.94.156.1) ;; WHEN: Wed Jan 31 09:47:27 2007 ;; MSG SIZE rcvd: 212 Now I will just wait till 4am or tomorrow and check the stats see if they have updated with anything new. I will keep you guys posted thanks.
I checked the stats today after I visited the site from outside and inside still shows 100%unresolved would this be a problem with the server being behind a NAT?
ISPConfig doesn't use /etc/webalizer.conf, it uses /root/ispconfig/scripts/shell/webalizer.conf. Please check if the settings there suit your needs.
NAT should not be the problem. I'm not familiar with webalizer, but is there an option to set DNS lookups? I know in awstats there is. If you don't set it correct, you only get IP numbers.
Can someone tell me what part of the conf file I have to enable if its off I do see a section that says countrygraph and it says that it is enabled as yes. DNScache files reads dns_cache.db no path. thanks in advance.
The important settings are DNSCache and DNSChildren. You can try DNSCache with a full path to see if it changes anything.
