I dunno why i using my dns server,it cannot resolve names in domains not handled by myself,i only can resolve those handled by myself
Thst the normal behaviour of mydns, as mydns does not dontain a resolver library. Solution is to install a dns resolver like dnsmasq. Follow the steps that are described in the chapter "Installing DNSMasq" from here (and only this chapter and not the whole tutorial): http://www.howtoforge.com/mydns_mydnsconfig_dnsmasp_on_ubuntu_edgy
1) Have you reconfigured the mydns.conf file as described? 2) Have you restarted mydns? 3) Post the content of /etc/resolv.conf
I have changed that but still not working nameserver 127.0.0.1 search hkhost.biz nameserver 203.80.96.10 nameserver 203.80.96.9
I have a very similar problem. When I try to bring up my domain name it gets stuck on "resolving host" and then times out. I already switched the name servers over. When I dig mydomain.com, it yields this: Code: root@server1:~# dig mydomain.com ; <<>> DiG 9.7.0-P1 <<>> mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 58715 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;mydomain.com. IN A ;; ANSWER SECTION: mydomain.com. 86400 IN A 12.345.67.890 ;; AUTHORITY SECTION: mydomain.com. 86400 IN NS ns1.nameserver.com. ;; Query time: 1 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Mon Jun 14 17:14:10 2010 ;; MSG SIZE rcvd: 88 This is in my /etc/dnsmasq.conf file: Code: no-listen = 127.0.0.1 recursive = 127.0.0.1 I followed all of the directions in the tutorial that was linked earlier in this thread. The contents of my configuration files are exactly what that tutorial suggested. "Netstat -tap" yields this: Code: root@server1:~# netstat -tap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 localhost.localdo:10024 *:* LISTEN 999/amavisd (master tcp 0 0 localhost.localdo:10025 *:* LISTEN 1551/master tcp 0 0 *:mysql *:* LISTEN 609/mysqld tcp 0 0 localhost.localdo:spamd *:* LISTEN 1003/spamd.pid tcp 0 0 *:http-alt *:* LISTEN 1644/apache2 tcp 0 0 *:www *:* LISTEN 1644/apache2 tcp 0 0 *:tproxy *:* LISTEN 1644/apache2 tcp 0 0 *:ftp *:* LISTEN 1564/pure-ftpd (SER tcp 0 0 server1.hosting.:domain *:* LISTEN 802/named tcp 0 0 localhost.locald:domain *:* LISTEN 802/named tcp 0 0 *:ssh *:* LISTEN 583/sshd tcp 0 0 *:smtp *:* LISTEN 1551/master tcp 0 0 localhost.localdoma:953 *:* LISTEN 802/named tcp 0 0 *:https *:* LISTEN 1644/apache2 tcp 0 52 server1.hosting.com:ssh 192.168.1.121:50920 ESTABLISHED 616/sshd: administr tcp6 0 0 [::]:pop3 [::]:* LISTEN 1443/couriertcpd tcp6 0 0 [::]:imap2 [::]:* LISTEN 1409/couriertcpd tcp6 0 0 [::]:ftp [::]:* LISTEN 1564/pure-ftpd (SER tcp6 0 0 [::]:domain [::]:* LISTEN 802/named tcp6 0 0 [::]:ssh [::]:* LISTEN 583/sshd tcp6 0 0 localhost:953 [::]:* LISTEN 802/named tcp6 0 0 [::]:imaps [::]:* LISTEN 1429/couriertcpd tcp6 0 0 [::]:pop3s [::]:* LISTEN 1463/couriertcpd root@server1:~# Thanks!
I have a very similar problem. Whenever I go to my domain name, it gets stuck on resolving host and then times out. I entered the correct name servers, and it looks like its forwarding when I do a dig mydomain.com: Code: ; <<>> DiG 9.7.0-P1 <<>> mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 57100 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;mydomain.com. IN A ;; ANSWER SECTION: mydomain.com. 86400 IN A 75.###.38.### ;; AUTHORITY SECTION: mydomain.com. 86400 IN NS ns1.nameserver.com. ;; Query time: 1 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Mon Jun 14 20:42:56 2010 ;; MSG SIZE rcvd: 88 root@server1:~# I followed all the configuration instructions in the tutorial posted above and made the appropriate entries in ISPconfig under DNS and site. Here is the output of my netstat -tap: Code: root@server1:~# netstat -tap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 localhost.localdo:10024 *:* LISTEN 896/amavisd (master tcp 0 0 localhost.localdo:10025 *:* LISTEN 1554/master tcp 0 0 *:mysql *:* LISTEN 567/mysqld tcp 0 0 localhost.localdo:spamd *:* LISTEN 900/spamd.pid tcp 0 0 *:http-alt *:* LISTEN 1652/apache2 tcp 0 0 *:www *:* LISTEN 1652/apache2 tcp 0 0 *:tproxy *:* LISTEN 1652/apache2 tcp 0 0 server1.hosting.:domain *:* LISTEN 1945/named tcp 0 0 localhost.locald:domain *:* LISTEN 1945/named tcp 0 0 *:ftp *:* LISTEN 1567/pure-ftpd (SER tcp 0 0 *:ssh *:* LISTEN 569/sshd tcp 0 0 localhost.localdoma:953 *:* LISTEN 1945/named tcp 0 0 *:smtp *:* LISTEN 1554/master tcp 0 0 *:https *:* LISTEN 1652/apache2 tcp 0 248 server1.hosting.com:ssh 192.168.1.121:59001 ESTABLISHED 2038/sshd: administ tcp6 0 0 [::]:pop3 [::]:* LISTEN 1446/couriertcpd tcp6 0 0 [::]:imap2 [::]:* LISTEN 1412/couriertcpd tcp6 0 0 [::]:domain [::]:* LISTEN 1945/named tcp6 0 0 [::]:ftp [::]:* LISTEN 1567/pure-ftpd (SER tcp6 0 0 [::]:ssh [::]:* LISTEN 569/sshd tcp6 0 0 localhost:953 [::]:* LISTEN 1945/named tcp6 0 0 [::]:imaps [::]:* LISTEN 1432/couriertcpd tcp6 0 0 [::]:pop3s [::]:* LISTEN 1466/couriertcpd root@server1:~# Edit: I also forgot to mention that when I ping my domain name, it does ping my ip address. It never stops pinging it though, and it displays a hostname from my service provider... I followed the perfect setup guide for ubuntu server 10.04, and everything else seems to be working perfectly. Both ns1.nameserver.com and ns2.nameserver.com point to the same IP address. Is this a problem? I had no problem entering those servers with the registrar.
Hehe, quite a few: Also... Is the intended behavior for my name servers (ns1.nameserver.com, etc) to point to the default server webpage? When I type in ns1.nameserver.com it gives me this message:
That sounds as if you didn't set any nameservers for that domain in your registrar's web interface...
