Help!!! i have ruined 6 dvd's already. i am trying to burn dvd's using k3b and or nero linux on both they burn about 12 % and then fail and eject the disc. using fedora 8 k3b that came with fedora. got a error 5 using k3b and a error using nero but no error code dvd's i use are tayo yeudon 8x +r is there something in terminal that i can type in to correct this? Correction: I did pull this out of the log on nero: 05:25:57 PM #23 TRANSFER 4 File TransferWriteFileItem.cpp, Line 168 Error reading file /home/Radon/DVDFab/MainMovie/HOT ROD AC/VIDEO_TS/VTS_01_1.VOB Why would it have trouble reading from my movie folder? Permissions? Thanks
[Radon@c-69-141-3-163 ~]$ ls -la /home/Radon/DVDFab/MainMovie/HOT ROD AC/VIDEO_TS ls: cannot access /home/Radon/DVDFab/MainMovie/HOT: No such file or directory ls: cannot access ROD: No such file or directory ls: cannot access AC/VIDEO_TS: No such file or directory [Radon@c-69-141-3-163 ~]$ Which is weird because i can see the files and i can also click on any vob file and play it with mplayer or vlcplayer I have 2 gig of memory and I also notice my memory at 90% is that my swap file memory? and do i need to adjust the size of my swap file? here is the size of my 150 gig system: [Radon@c-69-141-3-163 ~]$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 94G 17G 72G 20% / /dev/sda1 198M 25M 163M 14% /boot tmpfs 1014M 168K 1014M 1% /dev/shm here is the complete log file from nero Linux: 2CA0-0000-1800-2000-4002-6332-**** Linux 2.6.23.1-49.fc8 Nero API version: 7.5.14.9 Using interface version: 7.5.1.2 Installed in: /usr/lib/nero/ Application: Nero AG\Nero Linux Internal Version: 7, 5, 14, 9 Recorder: <PLEXTOR DVDR PX-800A> Version: 1.00 - HA 1 TA 0 - 0.0.0.0 Adapter driver: <pata_amd> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2026MB (2075312kB) Free physical memory: 199MB (204796kB) Memory in use : 90 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.12.2007 NeroAPI 05:23:58 PM #1 Phase 114 File ExtendedProgress.cpp, Line 537 DVD-Video files reallocation completed (no file modified) 05:23:58 PM #2 Phase 111 File ExtendedProgress.cpp, Line 537 DVD-Video files sorted 05:23:58 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3341 First writeable address = 0 (0x00000000) 05:23:58 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3341 First writeable address = 0 (0x00000000) 05:23:59 PM #5 Text 0 File Burncd.cpp, Line 3490 Turn on Disc-At-Once, using DVD media 05:24:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2188031 (486:13.56, 4273MB) 05:24:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO 05:24:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 2952 Recorder: PLEXTOR DVDR PX-800A, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 05:24:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc not empty. Insert empty disc. (Medium in drive: DVD+R. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.) 05:24:36 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 792 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2188032 (2188032) = #2188032/486:13.57 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2188032 blocks [PLEXTOR DVDR PX-800A (H:1 T:0)] -------------------------------------------------------------- 05:24:36 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [PLEXTOR DVDR PX-800A (H:1 T:0)] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4481089536, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2188032 | 0 | 0x00 2188032 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 05:24:36 PM #12 Text 0 File Burncd.cpp, Line 4263 Caching options: cache CDRom or Network-No, small files-Yes (<32KB) 05:24:36 PM #13 Phase 24 File ExtendedProgress.cpp, Line 537 Caching of files started 05:24:36 PM #14 Text 0 File Burncd.cpp, Line 4382 Cache writing successful. 05:24:36 PM #15 Phase 25 File ExtendedProgress.cpp, Line 537 Caching of files completed 05:24:36 PM #16 Phase 36 File ExtendedProgress.cpp, Line 537 Burn process started at 8x (11080 KB/s) 05:24:36 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2712 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 05:24:36 PM #18 Text 0 File Cdrdrv.cpp, Line 9915 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 05:24:36 PM #19 Text 0 File DVDR.cpp, Line 6720 Drive: PLEXTOR DVDR PX-800A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 05:24:36 PM #20 CDR -1211 File DVDR.cpp, Line 6393 Book Type set to: DVD-ROM 05:24:36 PM #21 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 05:24:36 PM #22 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 05:25:57 PM #23 TRANSFER 4 File TransferWriteFileItem.cpp, Line 168 Error reading file /home/Radon/DVDFab/MainMovie/HOT ROD AC/VIDEO_TS/VTS_01_1.VOB 05:25:57 PM #24 TRANSFER -25 File Reader.cpp, Line 270 Error reading data 05:25:57 PM #25 Text 0 File Reader.cpp, Line 273 Exception value: -1 05:26:16 PM #26 Phase 127 File ExtendedProgress.cpp, Line 537 Generating DVD high compatibility borders 05:27:18 PM #27 Text 0 File DVDPlusRW.cpp, Line 935 EndDAO: Last written address 68576 05:27:18 PM #28 Phase 129 File ExtendedProgress.cpp, Line 537 Generating DVD borders completed successfully 05:27:18 PM #29 Text 0 File DVDR.cpp, Line 6720 Drive: PLEXTOR DVDR PX-800A Book Type request [NEC]: DVD-ROM, write to RAM select Book Type setting from RAM Changing the Book Type was finished successfully, return code 0 05:27:18 PM #30 Phase 38 File ExtendedProgress.cpp, Line 537 Burn process failed at 8x (11080 KB/s)
Hi ek49, you have to escape the spaces in the path - try: ls -la /home/Radon/DVDFab/MainMovie/HOT\ ROD\ AC/VIDEO_TS Maybe k3b and nero linux have also problems with the spaces. You should try to remove the spaces or to replace them with underscores (/HOT_ROD_AC/). Best regards, Olli
here is what i get when i posted from your suggestion: [root@c-69-141-3-163 home]# ls -la /home/Radon/DVDFab/MainMovie/HOT\ ROD\ AC/VIDEO_TS total 4379312 drwxrwxr-x 2 Radon Radon 4096 2007-12-01 22:36 . drwxrwxr-x 4 Radon Radon 4096 2007-12-01 22:18 .. -r--r----- 1 Radon Radon 6144 2007-12-01 22:36 VIDEO_TS.BUP -r--r----- 1 Radon Radon 6144 2007-12-01 22:36 VIDEO_TS.IFO -r--r----- 1 Radon Radon 57344 2007-12-01 22:36 VTS_01_0.BUP -r--r----- 1 Radon Radon 57344 2007-12-01 22:36 VTS_01_0.IFO -r--r----- 1 Radon Radon 1073739776 2007-12-01 22:36 VTS_01_1.VOB -r--r----- 1 Radon Radon 1073739776 2007-12-01 22:36 VTS_01_2.VOB -r--r----- 1 Radon Radon 1073739776 2007-12-01 22:36 VTS_01_3.VOB -r--r----- 1 Radon Radon 1073739776 2007-12-01 22:36 VTS_01_4.VOB -r--r----- 1 Radon Radon 184901632 2007-12-01 22:36 VTS_01_5.VOB [root@c-69-141-3-163 home]# much better now how can I get Nero or k3b to see this? actually go in and change the folders name? from what i see, from what you are telling me, it hangs up when it gets to Hot Rod AC. so just a change to hot rod ac, to: Hot_Rod_AC would enable my burning again? If that fixes that, then I have a few more questions for you I an a real newb to Linux, (10 days into this), but am a computer geek for windows. i am trying to learn and it is so different. i have about 10 more issues i am trying to fix is there a time we could get together either by instant text or live chat and get me up and running? if not then we can do this the old fashion forums way thanks again!
Please try this: Code: chmod 644 /home/Radon/DVDFab/MainMovie/HOT\ ROD\ AC/VIDEO_TS/* Afterwards Nero and k3b should be able to read the files.
thank You will try it Still no luck. another coaster. now i have a major problem! there was a up date in yum for linux kernel and some security updates i installed them and now my desktop is foo-bar i can't get nvidia to work, says failed, when i go to nvidia settings, says my x-nvidia is not setup so run xnvidia-config did that and it put me in text mode on boot up. I need to clear all nvidia drivers and or packages from my system, and then correct this. i was using the perfect desktop for my settings for fedora 8. i had a problem with setting up the gnome effects and googled it and had to edit the xorg.cong file and did a repo on the nvidia drivers to get the effects to work but after the update, all is messed up. I also cannot use gnome desktop effect because my nvidia isn't setup. A upgrade should not have done this correct? i need help real bad now any way we can xchat to get this going? name a time and day or is there a irc channel with guru's on that i can have help me fix this mess?
Hi ek49, seems that you don't have installed the packages yum-fedorakmod and yum-kernel-module. Please install both to prevent such problems in the future. It would also be a good idea to install yum-skip-broken and yum-fastestmirror. yum -y install yum-fedorakmod yum-kernel-module yum-skip-broken yum-fastestmirror Now your actual problem. A new kernel has been installed although there was no fitting kmod-nvidia-package available for this new kernel. So start/restart your computer and hit a key when the grub-screen appears - select the older kernel and start with it. Afterwards remove the new kernel or always start with the older kernel till the kmod-nvidia-package is available for the new one. In the future the two yum-plugins that I mentioned first will prevent such problems - If there is a new kernel available without the fitting kmod-nvidia-package you'll not be able to install the kernel with yum (you'll get a warning). Have you used this howto -> http://www.howtoforge.com/installation-guide-fedora8-desktop for your setup? There are all things explained - including the yum-plugins, the livna-repo and the nvidia-setup (+compiz-fusion). PS: I sent you a private message .) Best regards, Olli
I installed fedora 8 using the perfect desktop on the main page in fedora 8 i had everything working except the dvd drives and i need lessons on getting around in terminal. Will revert back to the old kernel
