Hello, Email forward stop working for some of the domains that the server is hosting, only one of the domains is able to perform the email forward, the option "send copy to" (not aliases). I checked that the parameter "inet_interfaces = all' was configured on the main.cf postfix's file. I would really appreciate any advice what other configuration related to forward options could I checked. The server is running under Centos 5.5 and ISPConfig 3
What exactly is logged in the mail.log file when you send an email to one of these non-working forwards?
till, Could be this forward option related to the sendmail service?, because it is stopped. Attached iss the file with the logs...
Hello, I would really appreciate if someone can tell me if there is any specific service related to email forward on postfix?, I have not been able to make the email forward option work, it is has been disabled after a server shutdown and restart. Thanks.
These are the actual services running on the server: [[email protected] ~]# service --status-all acpid (pid 2778) is running... amavisd (pid 24952 1181 1159 1152 1151 1129) is running... anacron is stopped atd (pid 3231) is running... auditd (pid 2457) is running... automount (pid 2861) is running... Avahi daemon is not running Avahi DNS daemon is not running hcid (pid 2672) is running... sdpd dead but subsys locked clamd (pid 5593) is running... conmand is stopped cpuspeed is stopped crond (pid 3097) is running... cupsd (pid 2890) is running... cups-config-daemon is obsolete dc_client is stopped dc_server is stopped dnsmasq is stopped dund is stopped Fail2ban (pid 28677) is running... Status |- Number of jail: 5 `- Jail list: postfix-tcpwrapper, apache-tcpwrapper, proftpd-iptables, ssh-iptables, sasl Usage: /etc/init.d/firstboot {start|stop} gpm (pid 3070) is running... hald (pid 2792) is running... hidd (pid 2834) is running... httpd (pid 31143) is running... ibmsphalt is stopped Firewall is stopped. ipmi_msghandler module not loaded. ipmi_si module not loaded. ipmi_devintf module not loaded. /dev/ipmi0 does not exist. irattach is stopped irqbalance (pid 2538) is running... Kdump is not operational krb524d is stopped slapd is stopped mailman is stopped mcstransd is stopped mdadm is stopped mdmpd is stopped dbus-daemon (pid 2657) is running... monit is stopped multipathd is stopped munin-node (pid 3110) is running... mydns is stopped mysqld (pid 15799) is running... netconsole module not loaded netplugd is stopped Configured devices: lo eth0 eth1 Currently active devices: lo eth0 eth1 NetworkManager is stopped rpc.mountd is stopped nfsd is stopped rpc.rquotad is stopped rpc.statd (pid 2594) is running... nscd is stopped ntpd (pid 2916) is running... oddjobd is stopped pand is stopped pcscd (pid 2768) is running... portmap (pid 2549) is running... master (pid 22341) is running... pptpd is stopped Process accounting is disabled. pure-ftpd is stopped rdisc is stopped rpc.idmapd (pid 2635) is running... rrdcached is stopped saslauthd (pid 3256 3255 3254 3253 3251) is running... sendmail is stopped setroubleshootd is stopped smartd (pid 3640) is running... smbd is stopped nmbd is stopped snmpd is stopped snmptrapd is stopped spamd (pid 10793) is running... squid is stopped openssh-daemon (pid 2881) is running... syslogd (pid 2481) is running... klogd (pid 2484) is running... tcsd is stopped tux is stopped Xvnc is stopped vsftpd is stopped wdaemon is stopped winbindd is stopped wpa_supplicant is stopped xfs (pid 3203) is running... xinetd (pid 2904) is running... ypbind is stopped yum-updatesd (pid 3542) is running...
No. sendmail is not used on an ISPConfig server. The log shows that you have sent a message to [email protected] forwarded from [email protected] and the message was delivered successfully in the local mailbox of [email protected]. The "send copy to" function is not an email forward, it is a local mailbox script to send a copy. Email forwards are in the left menu under email forward.
Till, Thanks for your always help and the explanation, I trying to make the "send copy to" worked, there are several domains on the server and it's only working for one domain. Can I create this script on the mailbox manually and try to make it worked?.
The logs don't show anything related to [email protected] forwarded from [email protected], before the reboot I can confirm that the logs show all the info related to copied email account. Also I tried the Custom rule option with this cc '[email protected]omain2.com' that was working before as well.
The filter scripts on courier servers (and you seem to use courier imap and not dovecot) are in /var/vmail/mailfilters/.....
Till, I managed to copy the directory with file containing the script from one working account, changed the name and added the email account that I wanted to be copied and it worked. Something that is very curious is that the logs don't show the info related to the copied accounts, even with the only domain that was working before. Also when I tried to add a new email from the webpanel from ISPconfig didn't work, the file remains the same even maintains the last modified time stamp. It could be something related from permissions needed from the control panel? By now I think i can make it work manually . Thanks a lot!!!
Please use the debug mode to get a detailed log of the server actions when you add an email account or set a new copy-to address: https://www.faqforge.com/linux/debugging-ispconfig-3-server-actions-in-case-of-a-failure/
Till, I tried to enable the detailed log from the link tutorial and it's not working, right now I was trying to enable autoresponder and it did'nt worked. I was thinking that maybe there is one service that was not enable on reboot because everytime that I tried to modified something from the web console it not worked.
Till, This is the only output that I got when running the script manually: [[email protected] ~]# /usr/local/ispconfig/server/server.sh /usr/local/ispconfig/server/server.sh: line 7: 11416 File size limit exceeded/usr/bin/php -q /usr/local/ispconfig/server/server.php [[email protected] ~]# =========================================== This is the original cronjob file: #*/30 * * * * /bin/sa_learn #23 4 */2 * * /usr/bin/sa-update --no-gpg &> /dev/null #* 6 * * * /imap # 10 * * * * lynx cat /proc/net/ipt_recent/SMTP | grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}.[0-9]\{1,3\}' > /ips.txt * * * * * /usr/local/ispconfig/server/server.sh &> /dev/null 30 00 * * * /usr/local/ispconfig/server/cron_daily.sh &> /dev/null #* 1 * * * /usr/sbin/postsuper -d ALL #* 6 * * * sync; echo 3 > /proc/sys/vm/drop_caches ##### delete ipsconfig lock file #### #*/1 * * * * rm -rf /usr/local/ispconfig/server/temp/.ispconfig_lock #0,50 * * * * cat /dev/null > /var/log/maillog # SendmailAnalyzer log reporting daily cache #0 1 * * * /usr/local/sendmailanalyzer/sa_cache > /dev/null 2>&1 # On huge MTA you may want to have five minutes caching #*/5 * * * * /usr/local/sendmailanalyzer/sa_cache -a > /dev/null 2>&1 4 */2 * * * /usr/bin/sa-update --no-gpg &> /dev/null ==================================================== And this one is the modified one: #*/30 * * * * /bin/sa_learn #23 4 */2 * * /usr/bin/sa-update --no-gpg &> /dev/null #* 6 * * * /imap # 10 * * * * lynx cat /proc/net/ipt_recent/SMTP | grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}.[0-9]\{1,3\}' > /ips.txt #* * * * * /usr/local/ispconfig/server/server.sh &> /dev/null 30 00 * * * /usr/local/ispconfig/server/cron_daily.sh &> /dev/null #* 1 * * * /usr/sbin/postsuper -d ALL #* 6 * * * sync; echo 3 > /proc/sys/vm/drop_caches ##### delete ipsconfig lock file #### #*/1 * * * * rm -rf /usr/local/ispconfig/server/temp/.ispconfig_lock #0,50 * * * * cat /dev/null > /var/log/maillog # SendmailAnalyzer log reporting daily cache #0 1 * * * /usr/local/sendmailanalyzer/sa_cache > /dev/null 2>&1 # On huge MTA you may want to have five minutes caching #*/5 * * * * /usr/local/sendmailanalyzer/sa_cache -a > /dev/null 2>&1 4 */2 * * * /usr/bin/sa-update --no-gpg &> /dev/null ==========================================
This are the files that I found in /var/log/ispconfig and the size of the ispconfig.log file is 2.0GB : [[email protected] ispconfig]# ls -lha total 4.1G drwxr-xr-x 3 root root 4.0K May 18 2015 . drwxr-xr-x 23 root root 4.0K Sep 20 04:23 .. -rw-r--r-- 1 root root 2.0G May 18 2015 bk_ispconfig.log -rw-rw-rw- 1 root root 0 Nov 23 2010 cron.log drwxr-xr-x 4 root root 4.0K Jun 7 2012 httpd -rw-r--r-- 1 root root 2.0G Sep 20 07:18 ispconfig.log -rw-r--r-- 1 root root 4.8M Sep 20 00:31 ispconfig.log.1.gz When I run a cat to the ispconfig.log file it display the following: \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\\\\\\\\\')) -> mysql_query Table \\\\\\\\\\\\\\\'./dbispconfig/sys_log\\\\\\\\\\\\\\\' is marked as crashed and should be repaired\\\\\\\')) -> mysql_query Table \\\\\\\'./dbispconfig/sys_log\\\\\\\' is marked as crashed and should be repaired\\\')) -> mysql_query Table \\\'./dbispconfig/sys_log\\\' is marked as crashed and should be repaired\')) -> mysql_query Table \'./dbispconfig/sys_log\' is marked as crashed and should be repaired')) -> mysql_query Table './dbispconfig/sys_log' is marked as crashed and should be repaired 20.09.2017-00:32 - WARNING - DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES ('1',0,'1','1505889121','DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\'1\',0,\'1\',\'1505889121\',\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\'1\\\',0,\\\'1\\\',\\\'1505889121\\\',\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\'1\\\\\\\',0,\\\\\\\'1\\\\\\\',\\\\\\\'1505889121\\\\\\\',\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES ('1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1505889121\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'DB::query(INSERT INTO sys_log (server_id,datalog_id,loglevel,tstamp,message) VALUES (\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\',0,\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'1\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
You could rename that log file and see if server.sh runs without error. Are you on a 32bit system? That could run into 2G limit (or at least used to), or your filesystem may have a limit there, or maybe you have ulimit in effect (ulimit -f), any of which I believe would cause that error.
and you should run a repair on all tables in the dbispconfig database with phpmyadmin. there seem to be crashed database tables.
Hello Jesse, Yes the system is running on 32bit, It's an old system, we already purchased the migration tool to migrate to a new server but first we need to make these things work out due to our clients need this options working properly while we perform the migration. I rename the file but the autoresponder option is not working yet.
Till, While I repair the databases the email service would still running?, or It would be prefer to run the repair on a maintenance window?