ERROR: Could not append message to INBOX.Sent. Server responded: [ALERT] You exceeded your mail quota. Solution: Remove unneccessary messages from your folder and start with your Trash folder. Warning: Cannot modify header information - headers already sent by (output started at /usr/share/squirrelmail/functions/page_header.php:31) in /usr/share/squirrelmail/src/compose.php on line 498 Can I help me please? Thanks in advanced
This is probably the most "speak for itself" problems of all .. Read the post you did again, and reply with what you THINK is going on .. after that i'll start giving pointers
I have resolved my problem I went: nano /home/vmail/dominio.com/usuario/maildirsize In the first line modify: #10485760S this is the line, modify for: 90485760S 410 1 840 1 1873 1 847 1 959 1 4055 1 831 1 So It works 100%.
Well, if it's purely a mailserver .. You can close everything and open up: ssh: just for you smtp: world pop: world imap: world Checkout this cool tutorial about iptables (i know it's boring to read stuff, but you'll actually learn from it ): http://forums.pcper.com/showthread.php?t=432469
About iptables Thanks your response. I will ready the link that you put. I have script that might help me. SCRIPT: #!/bin/bash ##############USMAN AKRAM "FA05-BTN-005" (~*Lucky*~) BTN-6##############COMSATS INSTITUTE OF INFORMATION TECHNOLOGY - ABBOTTABAD#### echo -e "****************Welcome*************" ###############################IPTABLE SERVICES PROGRAM BEGINS HERE############################### checkstatus() { opt_checkstatus=1 while [ $opt_checkstatus != 7 ] do clear #echo -e "\nChoose the Option Bellow!!!\n echo -e "\n\t*****Note: Save your Iptables before stop/Restart the iptables Services*****\n" echo -e " 1. Save the iptables\n 2. Status of Iptables\n 3. Start iptables Services\n 4. Stop iptables Services\n 5. Restart iptable Services\n 6. Flush iptables (**Use Carefully_it will remove all the rules from iptables**)\n 7. Go back to Main Menu" read opt_checkstatus case $opt_checkstatus in 1) echo -e "*******************************************************\n" /etc/init.d/iptables save echo -e "\n*******************************************************\n" echo -e "Press Enter key to Continue..." read temp;; 2) echo -e "*******************************************************\n" /etc/init.d/iptables status echo -e "*******************************************************" echo -e "Press Enter key to Continue..." read temp;; 3) echo -e "*******************************************************\n" /etc/init.d/iptables start echo -e "*******************************************************\n" echo -e "Press Enter key to Continue..." read temp;; 4) echo -e "*******************************************************\n" /etc/init.d/iptables stop echo -e "*******************************************************\n" echo -e "Press Enter key to Continue..." read temp;; 5) echo -e "*******************************************************\n" /etc/init.d/iptables restart echo -e "*******************************************************\n" echo -e "Press Enter key to Continue..." read temp;; 6) iptables -F echo -e "*******************************************************" echo -e "All the Rules from the Iptables are Flushed!!!" echo -e "*******************************************************\n" echo -e "Press Enter key to Continue..." read temp;; 7) main;; *) echo -e "Wrong Option Selected!!!" esac done } ###############################BUILD FIREWALL PROGRAM BEGINS FROM HERE############################### buildfirewall() { ###############Getting the Chain############ echo -e "Using Which Chain of Filter Table?\n 1. INPUT 2. OUTPUT 3. Forward" read opt_ch case $opt_ch in 1) chain="INPUT" ;; 2) chain="OUTPUT" ;; 3) chain="FORWARD" ;; *) echo -e "Wrong Option Selected!!!" esac #########Getting Source IP Address########## #Label echo -e " 1. Firewall using Single Source IP\n 2. Firewall using Source Subnet\n 3. Firewall using for All Source Networks\n" read opt_ip case $opt_ip in 1) echo -e "\nPlease Enter the IP Address of the Source" read ip_source ;; 2) echo -e "\nPlease Enter the Source Subnet (e.g 192.168.10.0/24)" read ip_source ;; 3) ip_source="0/0" ;; #4) ip_source = "NULL" ;; *) echo -e "Wrong Option Selected" esac #########Getting Destination IP Address########## echo -e " 1. Firewall using Single Destination IP\n 2. Firewall using Destination Subnet\n 3. Firewall using for All Destination Networks\n" read opt_ip case $opt_ip in 1) echo -e "\nPlease Enter the IP Address of the Destination" read ip_dest ;; 2) echo -e "\nPlease Enter the Destination Subnet (e.g 192.168.10.0/24)" read ip_dest ;; 3) ip_dest="0/0" ;; #4) ip_dest = "NULL" ;; *) echo -e "Wrong Option Selected" esac ###############Getting the Protocol############# echo -e " 1. Block All Traffic of TCP 2. Block Specific TCP Service 3. Block Specific Port 4. Using no Protocol" read proto_ch case $proto_ch in 1) proto=TCP ;; 2) echo -e "Enter the TCP Service Name: (CAPITAL LETTERS!!!)" read proto ;; 3) echo -e "Enter the Port Name: (CAPITAL LETTERS!!!)" read proto ;; 4) proto="NULL" ;; *) echo -e "Wrong option Selected!!!" esac #############What to do With Rule############# echo -e "What to do with Rule? 1. Accept the Packet 2. Reject the Packet 3. Drop the Packet 4. Create Log" read rule_ch case $rule_ch in 1) rule="ACCEPT" ;; 2) rule="REJECT" ;; 3) rule="DROP" ;; 4) rule="LOG" ;; esac ###################Generating the Rule#################### echo -e "\n\tPress Enter key to Generate the Complete Rule!!!" read temp echo -e "The Generated Rule is \n" if [ $proto == "NULL" ]; then echo -e "\niptables -A $chain -s $ip_source -d $ip_dest -j $rule\n" gen=1 else echo -e "\niptables -A $chain -s $ip_source -d $ip_dest -p $proto -j $rule\n" gen=2 fi echo -e "\n\tDo you want to Enter the Above rule to the IPTABLES? Yes=1 , No=2" read yesno if [ $yesno == 1 ] && [ $gen == 1 ]; then iptables -A $chain -s $ip_source -d $ip_dest -j $rule else if [ $yesno == 1 ] && [ $gen == 2 ]; then iptables -A $chain -s $ip_source -d $ip_dest -p $proto -j $rule else if [ $yesno == 2 ]; then main fi fi fi } main() { ROOT_UID=0 if [ $UID == $ROOT_UID ]; then clear opt_main=1 while [ $opt_main != 4 ] do echo -e "/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\n" #############Check Whether the iptables installed or not############ echo -e "\t*****Main Menu*****\n 1. Check Iptables Package\n 2. Iptables Services\n 3. Build Your Firewall with Iptables\n 4. Exit" read opt_main case $opt_main in 1) echo -e "******************************" rpm -q iptables echo -e "******************************" ;; 2) checkstatus ;; 3) buildfirewall ;; 4) exit 0 ;; *) echo -e "Wrong option Selected!!!" esac done else echo -e "You Must be the ROOT to Perfom this Task!!!" fi } main exit 0 -------------------------------------- Would it service me?
Well it looks like a sort of wrapper around the usage of the iptables command in *nix So you could try and use it, it looks like it has the stuff in it you want, so why not give it a try. Though the downside of using these wrappers/scripts is that you won't really learn from them. (unless you don't care and just want the damn thing firewalled, you should us this )
Thanks I will use the script but I will read the link. Thanks Excuse me, how I can server of images backup the pcs with linux? For example: northon ghost with network but in linux...I have installed and configured drbl with clonezilla, Do you meet the script or programs differents? Thanks for all. Excuse me for my english...
About a server image yes, is about server image as northon ghost. I have DRBL installed with clonezilla and I do the image for network to the server image. Do you meet script or programs that they do those?
maykel, I'm having a hard time understanding your question, maybe someone else? And for the rest i have no real experience with DRBL, Clonezilla and Norton Ghost.
