Hi everyone, I'm trying to setup ipcop v.1.4 on my home network. My setup is as follows: Connection devices: - One Comtrend 5361 Wireless ADSL2+ Router (4 ethernet interfaces + wireless) - One pc with 3 nics which I want to install Ipcop on. All 3 nics are embedded on the motherboard! - One pc which I use as workstation with 1 nic ISP service type: PPPOE (I ns-looked up the hostname and it's too long to be written anywhere at all during installation) Primary DNS Server: I know it Secondary DNS Server: I know it Current network setup: I have connected 1 ethernet cable from router to the first nic on Ipcop pc. I have connected 1 cross-over cable from the Ipcop pc to my workstation pc. I want to setup the third nic on Ipcop ready for any server testing/hosting in the future. Fact: I get confused when I reach the Green, Red is modem or Green + Red + Orange side of the setup. I don't know if at the end of the setup, my work station should be ready to navigate to the internet without having to visit the Ipcop admin setup first. Should I turn off NAT on my router so that Ipcop handles the routing? Sorry, just confused. Please I need someone to recommend a good setting from the 192.168 address pool that will work for my network as it stands. I also have a laptop which for some reason has stopped connecting to the wireless router! I want to protect the laptop too. Any help will be greatly appreciated.
