Hi I have an ISPconfig3 server running web, ftp, db, email and dns. I've tried to follow guides on howto set up an secondary dns, ns2. I think I've done it correct. Code: dig @ns1.domain.net any domain.com ; <<>> DiG 9.7.3 <<>> @ns1.domain.net any domain.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 47636 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 5, AUTHORITY: 0, ADDITIONAL: 1 ;; QUESTION SECTION: ;domain.com. IN ANY ;; ANSWER SECTION: domain.com. 3600 IN A 91.189.XXX.XX domain.com. 3600 IN MX 10 mail.domain.com. domain.com. 3600 IN NS ns2.domain.net. domain.com. 3600 IN NS ns1.domain.net. domain.com. 3600 IN SOA ns1.domain.net me.domain.net. 2012032002 7200 540 604800 86400 ;; ADDITIONAL SECTION: mail.domain.com. 3600 IN A 91.189.XXX.XX ;; Query time: 12 msec ;; SERVER: 81.167.96.220#53(81.167.96.220) ;; WHEN: Wed Mar 21 20:01:24 2012 ;; MSG SIZE rcvd: 176 Code: dig @ns2.domain.net any domain.com ; <<>> DiG 9.7.3 <<>> @ns2.domain.net any domain.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 47636 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 5, AUTHORITY: 0, ADDITIONAL: 1 ;; QUESTION SECTION: ;domain.com. IN ANY ;; ANSWER SECTION: domain.com. 3600 IN A 91.189.XXX.XX domain.com. 3600 IN MX 10 mail.domain.com. domain.com. 3600 IN NS ns2.domain.net. domain.com. 3600 IN NS ns1.domain.net. domain.com. 3600 IN SOA ns1.domain.net me.domain.net. 2012032002 7200 540 604800 86400 ;; ADDITIONAL SECTION: mail.domain.com. 3600 IN A 91.189.XXX.XX ;; Query time: 12 msec ;; SERVER: 81.167.96.220#53(81.167.96.220) ;; WHEN: Wed Mar 21 20:01:24 2012 ;; MSG SIZE rcvd: 176 So if I'm correct. It should work. Where I bought my domain.com, I've set ns1.domain.net and ns2.domain.net as nameservers. But if I try to make a new sub-domain with ISPconfig, it goes into the database on both servers. But nothing shows if I run: Code: dig @ns1.domain.net any sub.domain.com ; <<>> DiG 9.7.3 <<>> @ns1.domain any sub.domain.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 20882 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;sub.domain.com. IN ANY ;; AUTHORITY SECTION: domain.com. 3600 IN SOA ns1.domain.net. me.domain.net. 2012032002 7200 540 604800 86400 ;; Query time: 1 msec ;; SERVER: 91.189.123.59#53(91.189.123.59) ;; WHEN: Wed Mar 21 20:08:52 2012 ;; MSG SIZE rcvd: 94
There is most likely a configuration issue in the dns record that you created in ispconfig. Please take a look into the syslog file in /var/log/, you should fine some named / bind errors there which explains why bind cant load the file.
Code: grep -i named syslog Mar 21 06:37:34 web2 named[807]: client 91.189.120.4#32388: query (cache) 'dynamic.vdc.vn.domain.net/A/IN' denied Mar 21 09:54:35 web2 named[807]: client 91.189.120.4#45565: query (cache) '245.115.119.217.in-addr.arpa.domain.net/A/IN' denied Mar 21 10:15:43 web2 named[807]: client 12.150.248.35#55340: query (cache) 'ns2.domain.net/AAAA/IN' denied Mar 21 10:15:43 web2 named[807]: client 12.150.248.35#58280: query (cache) 'ns1.domain.net/AAAA/IN' denied Mar 21 13:39:01 web2 named[807]: client 91.189.120.4#6426: query (cache) 'web2.bx-networks.net/MX/IN' denied Mar 21 15:39:12 web2 named[807]: client 91.189.120.4#47172: query (cache) 'dssb00148.lunarbreeze.com.domain.net/A/IN' denied Mar 21 16:51:01 web2 named[807]: client 81.167.36.3#6741: query (cache) 'isp.domain.net/A/IN' denied Starting bind. Code: Mar 21 17:15:32 web2 named[18287]: starting BIND 9.7.3 -u bind Mar 21 17:15:32 web2 named[18287]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=' 'CPPFLAGS=' Mar 21 17:15:32 web2 named[18287]: adjusted limit on open files from 1024 to 1048576 Mar 21 17:15:32 web2 named[18287]: found 1 CPU, using 1 worker thread Mar 21 17:15:32 web2 named[18287]: using up to 4096 sockets Mar 21 17:15:32 web2 named[18287]: loading configuration from '/etc/bind/named.conf' Mar 21 17:15:32 web2 named[18287]: reading built-in trusted keys from file '/etc/bind/bind.keys' Mar 21 17:15:32 web2 named[18287]: using default UDP/IPv4 port range: [1024, 65535] Mar 21 17:15:32 web2 named[18287]: using default UDP/IPv6 port range: [1024, 65535] Mar 21 17:15:32 web2 named[18287]: listening on IPv6 interfaces, port 53 Mar 21 17:15:32 web2 named[18287]: listening on IPv4 interface lo, 127.0.0.1#53 Mar 21 17:15:32 web2 named[18287]: listening on IPv4 interface eth0, 10.0.0.2#53 Mar 21 17:15:32 web2 named[18287]: generating session key for dynamic DNS Mar 21 17:15:32 web2 named[18287]: set up managed keys zone for view _default, file 'managed-keys.bind' Mar 21 17:15:32 web2 named[18287]: automatic empty zone: 254.169.IN-ADDR.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: 2.0.192.IN-ADDR.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: 100.51.198.IN-ADDR.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: 113.0.203.IN-ADDR.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: D.F.IP6.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: 8.E.F.IP6.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: 9.E.F.IP6.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: A.E.F.IP6.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: B.E.F.IP6.ARPA Mar 21 17:15:32 web2 named[18287]: automatic empty zone: 8.B.D.0.1.0.0.2.IP6.ARPA Mar 21 17:15:32 web2 named[18287]: command channel listening on 127.0.0.1#953 Mar 21 17:15:32 web2 named[18287]: command channel listening on ::1#953 Mar 21 17:15:32 web2 named[18287]: zone 0.in-addr.arpa/IN: loaded serial 1 Mar 21 17:15:32 web2 named[18287]: zone 127.in-addr.arpa/IN: loaded serial 1 Mar 21 17:15:32 web2 named[18287]: zone 255.in-addr.arpa/IN: loaded serial 1 Mar 21 17:15:32 web2 named[18287]: zone domain.com/IN: loaded serial 2012032002 Mar 21 17:15:32 web2 named[18287]: zone localhost/IN: loaded serial 2 Mar 21 17:15:32 web2 named[18287]: managed-keys-zone ./IN: loading from master file managed-keys.bind failed: file not found Mar 21 17:15:32 web2 named[18287]: managed-keys-zone ./IN: loaded serial 0 Mar 21 17:15:32 web2 named[18287]: running Mar 21 17:15:32 web2 named[18287]: zone domain.com/IN: sending notifies (serial 2012032002) Mar 21 20:29:01 web2 named[18287]: received control channel command 'reload' Mar 21 20:29:01 web2 named[18287]: loading configuration from '/etc/bind/named.conf' Mar 21 20:29:01 web2 named[18287]: /etc/bind/named.conf.local:3: undefined ACL 'ns2.domain.net' Mar 21 20:29:01 web2 named[18287]: reloading configuration failed: failure I get many like this., not sure what they mean... Code: Mar 22 08:00:04 web2 named[18287]: success resolving 'security.debian.org/A' (in 'security.debian.org'?) after reducing the advertised EDNS UDP packet size to 512 octets Mar 22 10:36:52 web2 named[18287]: success resolving 'ns3.nic.fr/AAAA' (in 'nic.fr'?) after reducing the advertised EDNS UDP packet size to 512 octets Mar 22 10:36:52 web2 named[18287]: success resolving 'sns-pb.isc.org/AAAA' (in 'isc.org'?) after reducing the advertised EDNS UDP packet size to 512 octets Mar 22 10:36:52 web2 named[18287]: success resolving 'sns-pb.isc.org/A' (in 'isc.org'?) after reducing the advertised EDNS UDP packet size to 512 octets Mar 22 10:36:53 web2 named[18287]: success resolving 'ns.jsinfo.net/AAAA' (in 'jsinfo.net'?) after reducing the advertised EDNS UDP packet size to 512 octets Mar 22 10:36:53 web2 named[18287]: success resolving 'ns4.apnic.net/AAAA' (in 'apnic.net'?) after reducing the advertised EDNS UDP packet size to 512 octets Mar 22 16:24:25 web2 named[18287]: success resolving 'r.arin.net/A' (in 'arin.net'?) after reducing the advertised EDNS UDP packet size to 512 octets
I followed up the howto here: http://www.ispconfig.org/news/tutor...nd-secondary-with-ispconfig-3-debian-squeeze/ Everything went ok. Installation, I can see the second server in the master ispconfig pannel. But they don't synchronized. The /etc/bind/slave is empty When the synchronization is supposed to happend? Is it on a cron job? How can I force ispconfig to synchronize? Thanks S
Hello, I don't see in your queries any A records for your ns1 and ns2 (ADDITIONAL SECTION). You need define both A records for your name servers. Cheers
Thanks pititis but I took an old tread so the beginning is not from me. Regarding the A record. I do have both A record for ns1 and ns2. Somebody know how ispconfig communicate between server ns1 and ns2? What are the ports needed to be open? S
