I installed suse 10.3 with ISPconfig following the directions. I was wondering if it works with dynamic IP from my provider. I was running one website fine but when I change it over to ISPconfig (in hopes of running more sites), I get an erro when I type in the webpage in the brower. The error said that its a shared IP and I should type in the address and not the number. Well I did type in the address and not the number IP. Maybe it has something to do with zoneedit forwarding my domain name to my current dhcp ip address. Please explain to me if its possible to run ISPconfig on my dhcp internet conneciton.
My internal IP was used. 192.168.1.100 (which points to my server)static within the network but my ISP is dynamic using zoneedit to update current ISP IP.
And if you access via any dns-name, mapping to your external IP, everything should work fine. How exactly do you access your site then?
okay so I have my site on the main directory for apache to pull. This only worked for one site. I use yahoo.com to register my domain name. I then point yahoo to zoneedit's dns server because I'm using zoneedit to update my dynamic IP address(because my interenet provider does not have static IP for residential) This has been working for about 3 years now. Now I want to add another website to my server and possible more so I followed the how to setup for Suse 10.3 the perfect setup. Everything installed as it should. I also opened up more ports in the router to ensure that I can access the server. Now I'm basically stuck. When i put in my address, (eg. www.testserver.com) it goes to my server and it says that this is a shared IP and I should enter in the website I"m looking for. I'm not sure If I need to setup up a cname and a record and/or MX record. If there a how on setting up all of this in ispconfig and making it work with my dhcp ISP? I know it works on static IPs but I haven't heard people here talk much about ISPconfig working witha dynamic ISP. Please advise.
okay so here is the info for ifconfig rdtechwebserver:/home/Admin # ifconfig eth0 Link encap:Ethernet HWaddr 00:04:76:B9:30:57 inet addr:192.168.1.100 Bcast:255.255.255.255 Mask:255.255.255.0 inet6 addr: fe80::204:76ff:feb9:3057/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3462 errors:0 dropped:0 overruns:1 frame:0 TX packets:2985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3029617 (2.8 Mb) TX bytes:352362 (344.1 Kb) Interrupt:19 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:7116 (6.9 Kb) TX bytes:7116 (6.9 Kb)
Here is the Vhost_ispconfig.conf file Please advise me if everything looks okay. ################################### # # ISPConfig vHost Configuration File # Version 1.0 # ################################### # NameVirtualHost 192.168.1.100:80 <VirtualHost 192.168.1.100:80> ServerName localhost ServerAdmin root@localhost DocumentRoot /var/www/sharedip </VirtualHost> # # ###################################### # Vhost: www.rdtech-online.com:80 ###################################### # # <VirtualHost 192.168.1.1:80> ServerName www.rdtech-online.com:80 ServerAdmin [email protected] DocumentRoot /srv/www/web1/web ServerAlias rdtech-online.com DirectoryIndex index.html index.htm index.php index.php5 index.php4 index.php3 index.shtml index.cgi index.pl index.jsp Default.htm default.htm Alias /cgi-bin/ /srv/www/web1/cgi-bin/ AddHandler cgi-script .cgi AddHandler cgi-script .pl ErrorLog /srv/www/web1/log/error.log AddType application/x-httpd-php .php .php3 .php4 .php5 <Files *.php> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php3> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php4> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php5> SetOutputFilter PHP SetInputFilter PHP </Files> php_admin_flag safe_mode On php_admin_value open_basedir /srv/www/web1/ php_admin_value file_uploads 1 php_admin_value upload_tmp_dir /srv/www/web1/phptmp/ php_admin_value session.save_path /srv/www/web1/phptmp/ <IfModule mod_ruby.c> <Directory /srv/www/web1/web> Options +ExecCGI </Directory> RubyRequire apache/ruby-run #RubySafeLevel 0 <Files *.rb> SetHandler ruby-object RubyHandler Apache::RubyRun.instance </Files> <Files *.rbx> SetHandler ruby-object RubyHandler Apache::RubyRun.instance </Files> </IfModule> AddType text/html .shtml AddOutputFilter INCLUDES .shtml AddType application/vnd.wap.wmlscriptc .wmlsc .wsc AddType text/vnd.wap.wml .wml AddType text/vnd.wap.wmlscript .ws .wmlscript AddType image/vnd.wap.wbmp .wbmp Alias /error/ "/srv/www/web1/web/error/" ErrorDocument 400 /error/invalidSyntax.html ErrorDocument 401 /error/authorizationRequired.html ErrorDocument 403 /error/forbidden.html ErrorDocument 404 /error/fileNotFound.html ErrorDocument 405 /error/methodNotAllowed.html ErrorDocument 500 /error/internalServerError.html ErrorDocument 503 /error/overloaded.html AliasMatch ^/~([^/]+)(/(.*))? /srv/www/web1/user/$1/web/$3 AliasMatch ^/users/([^/]+)(/(.*))? /srv/www/web1/user/$1/web/$3 </VirtualHost> # # #
not sure if this is a typo or the way it was posted or incorrect. Code: # Version 1.0 # ################################### # NameVirtualHost 192.168.1.100:80 <VirtualHost 192.168.1.[COLOR="SeaGreen"]100[/COLOR]:80> Code: # Vhost: www.rdtech-online.com:80 ###################################### # # <VirtualHost 192.168.1.[COLOR="Red"]1[/COLOR]:80> the ips dont match.
Are they suppose to match? the files were copied and pasted from the server verbatim. 192.168.1.1 is pointing to my router while 192.168.1.100 is my server ip Should they both be pointing to the router or my server? i left the test server running. www.rdtech-online.com I get the shared IP error.
yes, unless you have more then 1 ip for your server. and from your ifconfig on your other post 192.168.1.100 is the only ip for your server.
well i think its working now. I dont know how but its working. When I type the external IP, I get the "error" Its a share IP. Now when I enter in the website, I get the index page. Great. I still need help understanding cname, mx record, a record.
Thats normal as its namebased shared hosting. You can google for more but this might give you basic examples. http://www.google.com/support/a/bin/answer.py?hl=en&answer=48090
