Hello, I recently setup a fresh install of ISPCONFIG3 with 2 NIC's. One NIC has the WAN IP and the other is a LAN IP that I planned to use for faster throughput to copy files back and forth. The problem is that after installing all the files ISPCONFIG/centOS 6.3 wanted to use the non-broadcast IP's to resolve DNS etc. I have removed the LAN IP from /etc/hosts.conf and only have the WAN IP there as per ISPCONFIG3 install docs but it keeps overwriting with the LAN IP first (as the first nameserver) on reboot. /etc/named.conf I also edited this file and changed all the "any" to the actual WAN IP for the listen ports & allow query. /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 MY.WAN.IP.ADDRESS ns1.mydomain.com ns1 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 dig @ns1.mywan.com dig: couldn't get address for 'ns1.mydomain.com': not found nslookup mydomain.com ;; Got SERVFAIL reply from 71.243.0.12, trying next server (MY providers DNS1) ;; Got SERVFAIL reply from 192.168.9.66, trying next server (My local LAN Router) ;; Got SERVFAIL reply from 68.237.161.12, trying next server (My providers DNS2) ;; Got SERVFAIL reply from 192.168.9.66, trying next server (My local LAN Router) Server: 71.243.0.12 (MY providers DNS1) Address: 71.243.0.12#53 (My providers DNS1) ** server can't find mydomain.com.mydomain.com: SERVFAIL I did try a: dig mydomain.com @myprovidersDNSIP and no "Answer" section Just setup this domain last night so I assume it is just a propagation issue and I just may need to wait a couple more days. That is fine but "nslookup" should not be using local LAN IP's right? Any ideas? I never had these problems with a single NIC running right on the WAN. My goal is to have just the WAN resolving DNS etc. I am fine with sftping any files back and forth over the LAN by IP only. Thanks in advance for any replies! Art
