I keep reviving mail transport unavailable when I check my logs and run postqueue -p All my messages are getting stuck trying to route out it seems. If I run postsuper -r ALL the queue will process I have previously disabled spamassassin / clamav / amavis and I believe I've taken the necesary steps to disable amavis again after the update. I recently updated and ran into this issue. I tried to follow the forum post from last time this happened: https://www.howtoforge.com/community/threads/mail-isnt-sending-or-forwarding-anymore.72647/ But I'm not having any luck. Here's my current configuration (hopefully my copy/paste gets everything.,.,): I feel like some of it has become dirty over time, is there a way to reset the config and start fresh with it? - That could be a last effort if nothing else works. main.cf Code: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_un$ myhostname = codyswartz.us alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases alias_database = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases myorigin = /etc/mailname mydestination = localhost, localhost.localdomain relayhost = mynetworks = 127.0.0.0/8 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all html_directory = /usr/share/doc/postfix/html virtual_alias_domains = virtual_alias_maps = hash:/var/lib/mailman/data/virtual-mailman, proxy:mysql:/e$ virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /var/vmail virtual_uid_maps = mysql:/etc/postfix/mysql-virtual_uids.cf virtual_gid_maps = mysql:/etc/postfix/mysql-virtual_gids.cf inet_protocols = all smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, re$ smtpd_tls_security_level = may transport_maps = hash:/var/lib/mailman/data/transport-mailman, proxy:mysql:/etc$ relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $vir$ smtpd_sender_restrictions = check_sender_access regexp:/etc/postfix/tag_as_orig$ smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtua$ smtpd_client_message_rate_limit = 100 maildrop_destination_concurrency_limit = 1 maildrop_destination_recipient_limit = 1 virtual_transport = dovecot header_checks = regexp:/etc/postfix/header_checks mime_header_checks = regexp:/etc/postfix/mime_header_checks nested_header_checks = regexp:/etc/postfix/nested_header_checks body_checks = regexp:/etc/postfix/body_checks owner_request_special = no smtp_tls_security_level = may dovecot_destination_recipient_limit = 1 smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth #content_filter = amavis:[127.0.0.1]:10024 #receive_override_options = no_address_mappings message_size_limit = 0 smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3 smtpd_tls_protocols = !SSLv2,!SSLv3 smtp_tls_protocols = !SSLv2,!SSLv3 #content_filter = #receive_override_options = no_address_mappings sender_bcc_maps = proxy:mysql:/etc/postfix/mysql-virtual_outgoing_bcc.cf smtpd_restriction_classes = greylisting greylisting = check_policy_service inet:127.0.0.1:10023 smtpd_sender_login_maps = proxy:mysql:/etc/postfix/mysql-virtual_sender_login_m$ smtpd_helo_required = yes smtpd_helo_restrictions = permit_sasl_authenticated, permit_mynetworks, check_h$ smtpd_tls_exclude_ciphers = RC4, aNULL smtp_tls_exclude_ciphers = RC4, aNULL
master.cf Code: # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master" or # on-line: http://www.postfix.org/master.5.html). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #smtp inet n - - - 1 postscreen #smtpd pass - - - - - smtpd #dnsblog unix - - - - 0 dnsblog #tlsproxy unix - - - - 0 tlsproxy submission inet n - - - - smtpd -o syslog_name=postfix/submission -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions # -o smtpd_recipient_restrictions= # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING smtps inet n - - - - smtpd -o syslog_name=postfix/smtps -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions # -o smtpd_recipient_restrictions= # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup unix n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr unix n - n 300 1 qmgr #qmgr unix n - n 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp relay unix - - - - - smtp # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} dovecot unix - n n - - pipe flags=DROhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} #amavis unix - - - - 2 smtp # -o smtp_data_done_timeout=1200 # -o smtp_send_xforward_command=yes #127.0.0.1:10025 inet n - - - - smtpd # -o content_filter= # -o local_recipient_maps= # -o relay_recipient_maps= # -o smtpd_restriction_classes= # -o smtpd_client_restrictions= # -o smtpd_helo_restrictions= # -o smtpd_sender_restrictions= # -o smtpd_recipient_restrictions=permit_mynetworks,reject # -o mynetworks=127.0.0.0/8 # -o strict_rfc821_envelopes=yes # -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks #amavis unix - - - - 2 smtp # -o smtp_data_done_timeout=1200 # -o smtp_send_xforward_command=yes #127.0.0.1:10025 inet n - n - - smtpd # -o content_filter= # -o local_recipient_maps= # -o relay_recipient_maps= # -o smtpd_restriction_classes= # -o smtpd_client_restrictions= # -o smtpd_helo_restrictions= # -o smtpd_sender_restrictions= # -o smtpd_recipient_restrictions=permit_mynetworks,reject # -o mynetworks=127.0.0.0/8 # -o strict_rfc821_envelopes=yes # -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks # -o smtp_send_xforward_command=yes # -o disable_dns_lookups=yes #127.0.0.1:10027 inet n - n - - smtpd # -o content_filter= # -o local_recipient_maps= # -o relay_recipient_maps= # -o smtpd_restriction_classes= # -o smtpd_client_restrictions= # -o smtpd_helo_restrictions= # -o smtpd_sender_restrictions= # -o smtpd_recipient_restrictions=permit_mynetworks,reject # -o mynetworks=127.0.0.0/8 # -o strict_rfc821_envelopes=yes # -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks # -o smtp_send_xforward_command=yes # -o milter_default_action=accept # -o milter_macro_daemon_name=ORIGINATING # -o disable_dns_lookups=yes
mail log http://pastebin.com/YxyrxKFj Do I need to modify the tag_asforeign.re or tag_asoriginating.re files? I noticed they have /^/ FILTER amavis:[127.0.0.1]:10024 in them
You can re-run the ispconfig updater and answer yes to reconfigure services, that will catch a lot of the config, though it will enable spamassassin/amavis as well. You are wanting to run without those? Or that's just one measure to try to troubleshoot the real problem? What transport is it referring to when it says 'transport unavailable', amavis?
