Hi, i have do the how-to but i have receive this error: ********************** websrv2:~# vzctl set 101 --onboot yes --save Unable to open /usr/lib/libopcodes-2.15.so: /usr/lib/libopcodes-2.15.so: undefined symbol: bfd_get_arch Unable to open /usr/lib/libpthread.so: /usr/lib/libpthread.so: invalid ELF header Unable to open /usr/lib/libc.so: /usr/lib/libc.so: invalid ELF header Unable to open /usr/lib/librt.so: /usr/lib/librt.so: symbol __librt_disable_asynccancel, version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference Unable to open /usr/lib/libthread_db.so: /usr/lib/libthread_db.so: undefined symbol: ps_pglobal_lookup Saved parameters for VPS 101 *********************** How i can fix this? Thanks
Hi, it is 32 bit. Here is the info: server:~# uname -m i686 server:~# uname -a Linux server 2.6.8-022stab064-up #1 Wed Mar 8 11:53:09 CET 2006 i686 GNU/Linux Thanks for your help.
Same here I have the same problems. I changed the sources.list from: "deb http://debian.systs.org/ stable main" to "deb http://debian.systs.org/ stable openvz" Then "apt-get update && apt-get upgrade" From then on when i do vzctl stop 101 I get this result: ----------------------- dmz-srv3:~# vzctl stop 101 Unable to open /usr/lib/libopcodes-2.15.so: /usr/lib/libopcodes-2.15.so: undefined symbol: bfd_get_arch Unable to open /usr/lib/libpthread.so: /usr/lib/libpthread.so: invalid ELF header Unable to open /usr/lib/libc.so: /usr/lib/libc.so: invalid ELF header Unable to open /usr/lib/librt.so: /usr/lib/librt.so: symbol __librt_disable_asynccancel, version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference Unable to open /usr/lib/libthread_db.so: /usr/lib/libthread_db.so: undefined symbol: ps_pglobal_lookup Stopping VPS ... VPS was stopped VPS is unmounted dmz-srv3:~# ----------------------- when i start i get this ----------------------- dmz-srv3:~# vzctl start 101 Unable to open /usr/lib/libopcodes-2.15.so: /usr/lib/libopcodes-2.15.so: undefin ed symbol: bfd_get_arch Unable to open /usr/lib/libpthread.so: /usr/lib/libpthread.so: invalid ELF heade r Unable to open /usr/lib/libc.so: /usr/lib/libc.so: invalid ELF header Unable to open /usr/lib/librt.so: /usr/lib/librt.so: symbol __librt_disable_asyn ccancel, version GLIBC_PRIVATE not defined in file libc.so.6 with link time refe rence Unable to open /usr/lib/libthread_db.so: /usr/lib/libthread_db.so: undefined sym bol: ps_pglobal_lookup Starting VPS ... VPS is mounted Adding IP address(es): 192.168.166.5 Setting CPU units: 500 Set hostname: vps101.********.lan File resolv.conf was modified VPS start in progress... dmz-srv3:~# ----------------------- uname -m i686 uname -a Linux dmz-srv3.*******.lan 2.6.8-022stab064-up #1 Thu Mar 9 21:14:32 CET 2006 i686 GNU/Linux
You got these problems first after you changed the sources list to "deb http://debian.systs.org/ stable openvz" and updated the scripts? Before the update the vzctl scripts are working fine?
Me have change the main to openvz because with the main the apt-get update give me errors. If you check and this page: http://debian.systs.org/doku.php?id=download you can see that the right is with openvz
I tested the howto a few days ago with the settings described in the howto and everything worked fine. Either the guys at debian.systs.org reorganized their pacakges or they uploaded broken packages.
Update: It seems that debian.systs.org has updated their packages today. It looks like that the new vzctl scripts needs the latest kernel patch. Please try to recompile your openvz kernel with the latest patch: http://download.openvz.org/kernel/022stab072.2/patches/patch-022stab072-combined.gz
For me openvz worked very well also for hmm 2 weeks or so. Now i wanted to "apt-get update && apt-get upgrade" because wel you should do that once a while right There was a sources.list error so i started looking what it was. I needed to change the sources.list just like blueice wrote. After i updated the sources.list and again run "apt-get update && apt-get upgrade" vzctl got updated and after that the problems started. so yes, your probably right, they sended broken packages.
Ok, thanks for reporting that. I will try to find out if the packages are broken or if a newer kernel patch is needed and update the howto...
I'am just trying it, maybe it does not help if the packages are really broken. I will post the instructions as soon as i finished my tests.
The problem is solved now. New packages are available in the debian.systs.org repository. To update your installation, run: apt-get update apt-get -u upgrade Thanks to Thorsten from debian.systs.org for his help and patching the packages so fast!
The problem I'm getting I've followed the procedure on two systems. Here is what I get on both when I try to start the virtual session: linus:/vz/template/cache# vzctl start 101 Starting VPS ... VPS is mounted Adding IP address(es): 192.168.1.188 arpsend: can't get iface 'eth0:' address : Cannot assign requested address vps-net_add WARNING: arpsend -c 1 -w 1 -D -e 192.168.1.188 eth0: FAILED arpsend: can't get iface 'eth0:' address : Cannot assign requested address vps-net_add WARNING: arpsend -c 1 -w 1 -U -i 192.168.1.188 -e 192.168.1.188 eth0: FAILED Setting CPU units: 1000 Set hostname: test101.xxxxxx.ca File resolv.conf was modified VPS start in progress... linus:/vz/template/cache# I can SSH into the virtual session but the routing is all screwed up. I can ping other machines on the segment, but it won't route anywhere. test101:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 191.255.255.1 * 255.255.255.255 UH 0 0 0 venet0 default 191.255.255.1 0.0.0.0 UG 0 0 0 venet0 test101:~# I hope it isn't really obvious so I don't feel stupid, but the solution escapes me. Any suggestions? Walter
It worked this time... Being the impatient guy I am, I re-installed by test box to check out other projects. I followed my notes to put the OpenVZ back in and this time it worked. Since I'm just cutting and pasting from my notes (a cut down version of what's on line) the only difference I can see is that I may have previously chosen to enter a different domain then the host computer. This time I chose the same domain, and it worked. I can ping external sites. FYI, my ifconfig is testbox:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0A:E6:71:3C:5C inet addr:192.168.0.9 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:31444 errors:0 dropped:0 overruns:0 frame:0 TX packets:16258 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:46342543 (44.1 MiB) TX bytes:1146931 (1.0 MiB) Interrupt:5 Base address:0xd400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:560 (560.0 b) TX bytes:560 (560.0 b) venet0 Link encap:UNSPEC HWaddr 00-00-FF-00-00-00-00-00-00-00-00-00-00-00-00-00 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Thanks for your offer to help. Some times things just work on thier own! Walter
problem connecting vps from outside the host machine Hello everyone, firstly, thank you very much for this how-to i follow the steps and obtain the same error msg as the previous post : vzctl start 102 Starting VPS ... VPS is mounted Adding IP address(es): 192.168.253.52 arpsend: can't get iface 'eth0:' address : Cannot assign requested address vps-net_add WARNING: arpsend -c 1 -w 1 -D -e 192.168.253.52 eth0: FAILED arpsend: can't get iface 'eth0:' address : Cannot assign requested address vps-net_add WARNING: arpsend -c 1 -w 1 -U -i 192.168.253.52 -e 192.168.253.52 eth0: FAILED Setting CPU units: 1000 Set hostname: vps102.xxxxxx.com File resolv.conf was modified VPS start in progress... then i can only ping/ssh/... etc from the debian host and not from another computer the ifconfig from the host machine : eth0 Lien encap:Ethernet HWaddr 00:11:09:89:AE:9D inet adr:192.168.253.22 Bcast:192.168.253.255 Masque:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:662268 errors:0 dropped:0 overruns:0 frame:0 TX packets:208678 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:473108294 (451.1 MiB) TX bytes:19679743 (18.7 MiB) Interruption:23 Adresse de base:0xc000 lo Lien encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:1232 (1.2 KiB) TX bytes:1232 (1.2 KiB) venet0 Lien encap:UNSPEC HWaddr 00-00-FF-00-00-00-00-00-00-00-00-00-00-00-00-00 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:183 errors:0 dropped:0 overruns:0 frame:0 TX packets:245 errors:0 dropped:32 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:21317 (20.8 KiB) TX bytes:18495 (18.0 KiB) can u help plaese ? thanks in advance
Make sure 192.168.253.52 isn't already in use by another system. Did you follow the tutorial as close as possible? Can you rule out that you made types somewhere?
