postfix and user

Hi all

I have installed postfix in fc5 x86_64 with this howto http://www.howtoforge.com/perfect_setup_fedora_core_5_p5
and i have installed also ispconfig

i have test whit telnet localhost 25 and work fine ...

but i have one question.
where i can create my email user ?

thanks , i'm a newbies of postfix ....

 

You must create a customer first in ISPConfig, then create a web site for this customer, and then you can create users and email addresses on the tab "User & Email".
Have a look here: http://www.ispconfig.org/downloads/manual_en/manual_kunde_en_src.htm#4_2_2

 

Hi,
Thanks for your answer , i have created user in tab "User & Email" and work ( i have tested whit SquirrelMail ) i can log in with my new user web2_carlainz ( email [email protected] ) but if i send email doesn't arrive at destination .
the same is i send email ( from gmail) doesn't arrive in my new postbox [email protected] ...

Thanks

 

after some minute after i have try to send a email from my new postbox , i receve this :

Return-Path: <>
X-Original-To: [email protected]ldomain
Delivered-To: [email protected]ldomain
Received: by localhost.localdomain (Postfix)
id 156E11CA035E; Sun, 7 May 2006 18:43:54 +0200 (CEST)
Date: Sun, 7 May 2006 18:43:54 +0200 (CEST)
From: [email protected]ldomain (Mail Delivery System)
Subject: Undelivered Mail Returned to Sender
To: [email protected]ldomain
MIME-Version: 1.0
Content-Type: multipart/report; report-type=delivery-status;
boundary="8559F1CA035C.1147020234/localhost.localdomain"
Content-Transfer-Encoding: 8bit
Message-Id: <[email protected]>


This is the Postfix program at host localhost.localdomain.

I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.

For further assistance, please send mail to <postmaster>

If you do so, please include this problem report. You can
delete your own text from the attached returned message.

The Postfix program

<[email protected]>: host xxxgw3.xxx.com[192.127.252.xxx] said: 553 5.1.8
<[email protected]>... Domain of sender address
[email protected]ldomain does not exist (in reply to
RCPT TO command)

 

Make sure the MX record for mydomain.com points to your server.

Why are you trying to send to web2_carlainz@localhost.localhost.localdomain?

 

Make sure the MX record for mydomain.com points to your server.

Yes , today my maintainer change and now the MX record points at my server ip.

Why are you trying to send to [email protected]ldomain?

now i have change my /etc/hosts from

# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost

to

# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
80.150.x.x mydomain.it mydomain

and my etc/sysconfig/network

from

NETWORKING=yes
HOSTNAME=localhost.localdomain

to

NETWORKING=yes
HOSTNAME=mydomain.com

Now when i send a email arrive with this address [email protected]

where I can change in [email protected] ?

I have try from gmail , hotmail , myoffice to send a email at [email protected] or [email protected] but it does not arrive .........

Thanks

 

Is localhost.mydomain.com in /etc/postfix/local-host-names? If not, add it at the bottom of that file and restart Postfix.

 

yes i have localhost.mydomain.com , this is my file

###################################
#
# ISPConfig local-host-names Configuration File
# Version 1.0
#
###################################
localhost
mydomain.com
localhost.mydomain.com
localhost.com
www.mydomain.com
#### MAKE MANUAL ENTRIES BELOW THIS LINE! ####


Thanks

 

Do the emails arrive when you send to [email protected]?
Any errors in your mail log?

 

This is my /var/log/maillog

May 9 16:30:01 mydomain dovecot: pop3-login: Disconnected: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 17:00:01 mydomain dovecot: pop3-login: Disconnected: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 17:31:01 mydomain dovecot: pop3-login: Disconnected: Inactivity: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 17:42:34 mydomain dovecot: imap-login: Login: user=<web2_carlainz>, method=PLAIN, rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 17:42:35 mydomain dovecot: imap-login: Login: user=<web2_carlainz>, method=PLAIN, rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 17:43:35 mydomain dovecot: imap-login: Disconnected: Inactivity: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 17:44:35 mydomain dovecot: imap-login: Disconnected: Inactivity: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 17:50:04 mydomain dovecot: imap-login: Disconnected: Inactivity: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 17:50:04 mydomain dovecot: imap-login: Login: user=<web2_carlainz>, method=PLAIN, rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 18:01:01 mydomain dovecot: pop3-login: Disconnected: Inactivity: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 18:31:01 mydomain dovecot: pop3-login: Disconnected: Inactivity: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 19:01:01 mydomain dovecot: pop3-login: Disconnected: Inactivity: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 19:31:01 mydomain dovecot: pop3-login: Disconnected: Inactivity: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 20:01:01 mydomain dovecot: pop3-login: Disconnected: Inactivity: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured
May 9 20:31:01 mydomain dovecot: pop3-login: Disconnected: Inactivity: rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured

Thanks for your help ...

Cheers

 

if from my gmail account send a email at [email protected] after some hours i receve this :

X-Gmail-Received: 615fd346eb1a35ad0f58390e0c6ae9a42d47c870
Delivered-To: [email protected]
Received: by 10.70.126.18 with SMTP id y18cs190215wxc;
Tue, 9 May 2006 11:27:09 -0700 (PDT)
Received: by 10.70.28.7 with SMTP id b7mr4304944wxb;
Tue, 09 May 2006 11:26:43 -0700 (PDT)
Return-Path: <>
Received: by 10.70.28.7 with SMTP id b7mr5624847wxb;
Tue, 09 May 2006 11:26:43 -0700 (PDT)
From: Mail Delivery Subsystem <[email protected]>
To: [email protected]
Subject: Delivery Status Notification (Delay)
Date: Tue, 09 May 2006 11:26:43 -0700 (PDT)

This is an automatically generated Delivery Status Notification

THIS IS A WARNING MESSAGE ONLY.

YOU DO NOT NEED TO RESEND YOUR MESSAGE.

Delivery to the following recipient has been delayed:

[email protected]

Message will be retried for 1 more day(s)

Technical details of temporary failure:
TEMP_FAILURE: Could not initiate SMTP conversation with any hosts:
[80.150.x.x.mydomain. (0): Destination address required]

----- Message header follows -----

Received: by 10.70.28.7 with SMTP id b7mr1426131wxb;
Sun, 07 May 2006 10:44:20 -0700 (PDT)
Received: by 10.70.126.18 with HTTP; Sun, 7 May 2006 10:44:20 -0700 (PDT)
Message-ID: <[email protected]>
Date: Sun, 7 May 2006 19:44:20 +0200
From: "Carlainz" <[email protected]>
To: [email protected]
Subject: 8888888888888
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="----=_Part_32850_922990.1147023860192"

----- Message body suppressed -----

 

You didn't post the important parts from your mail log, just some imao login attempts, but nothing about Postfix...

Can you post your real domain name here?

 

hi this is my /var/log/maillog

cheers

 

The problem is this:

Code:

dig mx softhelp.it

; <<>> DiG 9.2.1 <<>> mx softhelp.it
;; global options:  printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 39667
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;softhelp.it.                   IN      MX

;; ANSWER SECTION:
[B][COLOR="Red"]softhelp.it.            14400   IN      MX      0 82.156.64.66.softhelp.it.[/COLOR][/B]

;; Query time: 53 msec
;; SERVER: 81.169.163.104#53(81.169.163.104)
;; WHEN: Wed May 10 15:49:25 2006
;; MSG SIZE  rcvd: 58

The mailserver for softhelp.it is 82.156.64.66.softhelp.it, but 82.156.64.66.softhelp.it doesn't exist:

Code:

dig 82.156.64.66.softhelp.it

; <<>> DiG 9.2.1 <<>> 82.156.64.66.softhelp.it
;; global options:  printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 23303
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0

;; QUESTION SECTION:
;82.156.64.66.softhelp.it.      IN      A

;; AUTHORITY SECTION:
softhelp.it.            10800   IN      SOA     ns1.pegasohosting.net. info.pegasohosting.net. 2006020103 14400 7200 3600000 86400

;; Query time: 60 msec
;; SERVER: 81.169.163.104#53(81.169.163.104)
;; WHEN: Wed May 10 15:49:34 2006
;; MSG SIZE  rcvd: 104

Please change the MX record for softhelp.it.

 

sorry ,

where is the mx record file conf ?
I have try to find in ispconfig but i never see a possibility to change .
Also i have try in mamed.conf .....

Thanks

 

You must change the MX record on the authoritative name servers for softhelp.it. They are ns1.pegasohosting.net and ns2.pegasohosting.net.

 

Hi,
I have send a email at my maintainer and now the MX record it's correct

I have try

dig mx softhelp.it

; <<>> DiG 9.3.2 <<>> mx softhelp.it
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 7120
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;softhelp.it. IN MX

;; ANSWER SECTION:
softhelp.it. 13807 IN MX 0 softhelp.it.

;; Query time: 11 msec
;; SERVER: 192.168.100.254#53(192.168.100.254)
;; WHEN: Thu May 11 19:20:49 2006
;; MSG SIZE rcvd: 45


but not yet if i send a email at [email protected] or [email protected]
from my gmail or other account arrive at destination ...

Thanks

 

It can take up to 72 hours until DNS changes propagate. So you must be a little patient.

 

58 hours and not jet work ...
i hope i the last 14 hours ....

Cheers

 

But the records look ok.