Hi I had (more or less) successfully upgraded my multi-server setup to ISpconfig 3.1 (and the new billing module). Unfortunately the "reconfigure services" during the upgrade made a mess. Especially my postfix setup stopped working. There were multiple changes to the main.cf config file, but what made a mess was the changed amavis port (10024/10026 instead of 10028) -> so i changed that mx smtp listening port line to -o smtpd_proxy_filter=127.0.0.1:10024 (from 10028) and it started working again. I realized that there were changes with greylisting too. I had postgrey set up and everything was working fine. No i am not sure if it still works. I see that there is now a greylisting option in the ipsconfig interface. but it seems it can be ONLY enabled for SINGLE addresses? Since the changed Code: smtpd_sender_restrictions = check_sender_access regexp:/etc/postfix/tag_as_originating.re , permit_mynetworks, permit_sasl_authenticated, check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf, check_sender_access regexp:/etc/postfix/tag_as_foreign.re i get the following warnings: smtpd[18326]: warning: access table regexp:/etc/postfix/tag_as_originating.re: with smtpd_proxy_filter specified, action FILTER is unavailable smtpd[18326]: warning: access table regexp:/etc/postfix/tag_as_foreign.re: with smtpd_proxy_filter specified, action FILTER is unavailable (I am using debian wheezy, 7.11 with postfix 2.9.6-2) is there a "changelog" what is supposed to be changed during the 3.0 -> 3.1 upgrade of ISPconfig? any help to resolve this issues is appreciated. kind regards KoS
There are no manual changes needed in postfix main or master cf as the reconfigure services is doing all changes. I updated several systems without an Issue. I can only guess, most likely your server was not using the default postfix setup of an ispconfig 3.0.5 system so that the changes that were made for the new version were not compatible wth your customized postfix setup.
Working main.cf of a ISPConfig 3.1 Ubuntu server: Code: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination myhostname = server1.example.com alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases alias_database = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases myorigin = /etc/mailname mydestination = server1.example.com, localhost, localhost.localdomain relayhost = mynetworks = 127.0.0.0/8 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all html_directory = /usr/share/doc/postfix/html virtual_alias_domains = virtual_alias_maps = hash:/var/lib/mailman/data/virtual-mailman, proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, proxy:mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /var/vmail virtual_uid_maps = mysql:/etc/postfix/mysql-virtual_uids.cf virtual_gid_maps = mysql:/etc/postfix/mysql-virtual_gids.cf sender_bcc_maps = proxy:mysql:/etc/postfix/mysql-virtual_outgoing_bcc.cf smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes smtpd_restriction_classes = greylisting greylisting = check_policy_service inet:127.0.0.1:10023 smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, check_recipient_access mysql:/etc/postfix/mysql-virtual_recipient.cf, reject_rbl_client zen.spamhaus.org, reject_rbl_client dul.dnsbl.org, check_recipient_access mysql:/etc/postfix/mysql-virtual_policy_greylist.cf smtpd_tls_security_level = may transport_maps = hash:/var/lib/mailman/data/transport-mailman, proxy:mysql:/etc/postfix/mysql-virtual_transports.cf relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf smtpd_sender_login_maps = proxy:mysql:/etc/postfix/mysql-virtual_sender_login_maps.cf proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $sender_bcc_maps $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $smtpd_sender_login_maps smtpd_helo_required = yes smtpd_helo_restrictions = permit_sasl_authenticated, permit_mynetworks, check_helo_access regexp:/etc/postfix/helo_access, reject_invalid_hostname, reject_non_fqdn_hostname, check_helo_access regexp:/etc/postfix/blacklist_helo smtpd_sender_restrictions = check_sender_access regexp:/etc/postfix/tag_as_originating.re , permit_mynetworks, permit_sasl_authenticated, check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf, check_sender_access regexp:/etc/postfix/tag_as_foreign.re smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf smtpd_client_message_rate_limit = 100 maildrop_destination_concurrency_limit = 1 maildrop_destination_recipient_limit = 1 virtual_transport = dovecot header_checks = regexp:/etc/postfix/header_checks mime_header_checks = regexp:/etc/postfix/mime_header_checks nested_header_checks = regexp:/etc/postfix/nested_header_checks body_checks = regexp:/etc/postfix/body_checks owner_request_special = no smtp_tls_security_level = may smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3 smtpd_tls_protocols = !SSLv2,!SSLv3 smtp_tls_protocols = !SSLv2,!SSLv3 smtpd_tls_exclude_ciphers = RC4, aNULL smtp_tls_exclude_ciphers = RC4, aNULL dovecot_destination_recipient_limit = 1 smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth content_filter = amavis:[127.0.0.1]:10024 receive_override_options = no_address_mappings message_size_limit = 0
And here is the master.cf file: Code: # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master" or # on-line: http://www.postfix.org/master.5.html). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (no) (never) (100) # ========================================================================== smtp inet n - y - - smtpd #smtp inet n - y - 1 postscreen #smtpd pass - - y - - smtpd #dnsblog unix - - y - 0 dnsblog #tlsproxy unix - - y - 0 tlsproxy submission inet n - y - - smtpd -o syslog_name=postfix/submission -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions # -o smtpd_recipient_restrictions= # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING smtps inet n - y - - smtpd -o syslog_name=postfix/smtps -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions # -o smtpd_recipient_restrictions= # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - y - - qmqpd pickup unix n - y 60 1 pickup cleanup unix n - y - 0 cleanup qmgr unix n - n 300 1 qmgr #qmgr unix n - n 300 1 oqmgr tlsmgr unix - - y 1000? 1 tlsmgr rewrite unix - - y - - trivial-rewrite bounce unix - - y - 0 bounce defer unix - - y - 0 bounce trace unix - - y - 0 bounce verify unix - - y - 1 verify flush unix n - y 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - y - - smtp relay unix - - y - - smtp # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - y - - showq error unix - - y - - error retry unix - - y - - error discard unix - - y - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - y - - lmtp anvil unix - - y - 1 anvil scache unix - - y - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} amavis unix - - - - 2 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - n - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks -o smtp_send_xforward_command=yes -o disable_dns_lookups=yes 127.0.0.1:10027 inet n - n - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks -o smtp_send_xforward_command=yes -o milter_default_action=accept -o milter_macro_daemon_name=ORIGINATING -o disable_dns_lookups=yes
thank you. in the meantime i got it running again, will compare the config files in detail later. regarding postgrey, could you please let me know how it is supposed to work? as said, i see only for single mailboxes an option to ENABLE greylisting, but i would like to have it enabled for every user by default (e.g. domain or server wide).
this means i need to enabled it for each single mailbox? is that documented somewhere? i would have expected to have it at least enabled per domain. so i would need to enable it via API if i need it for all users... Can i somehow disable the GUI option for greylisting as i'll configure it, as it was before, server-wide.
ISPConfig manual, chapter 4.7.1.3 Email Mailbox. There is no config option, you wll have to alter the html template of the page if you want to hide it.
