Hello! I have problem to create RAID 1 when I install Ubuntu 10.04 64 bit. I have two HDD WD Black 500GB SATA2. I created two partitions on one HDD and the same on second HDD, all with bootable flag and / and so on. After instalation I have inif terminal! Where is a problem? MB Intel S3420GPV P.S. In hdd list I see SCSI1 (0,0,0) and SCSI2 (0,0,0)? It is normal? DVD-ROM SATA too. Big thnks.
Now I am try to create RAID 1 from this post http://http://howtoforge.com/how-to-set-up-software-raid1-on-a-running-system-incl-grub2-configuration-ubuntu-10.04-p3 But after restart have this log: Code: Common problems: - Boot args (cat /proc/cmdline) -Check rootdelay= -Check root= - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/md0 does not exist. Dropping to a shell! And now have initramfs terminal. What I can to do now to decide this problem? Big thnks.
When I install RAID with Ubuntu install after ubuntu installtions complete, after reboot have this log: Code: mount: mounting /dev/disk/by-uuid/dd6c807e-4433333 on /root failed: Invalid argument mount: mounting /dev on /root/dev failed: No such file or dir mount: mounting /sys on /root/sys failed: No such file or dir mount: mounting /proc on /root/proc failed: No such file or dir Target filesystem doesnot have /sbin/init. No init found. Try passing init= bootarg. May be my motherboard not support Ubuntu Software RAID???
I try ti install Debian. After instalation all seems ok, but in cat /proc/mdstat Code: md1: active (auto-read-only) raid1 sda5[0] sdb5[1] 4891648 blocks [2/2] [UU] resync=PENDING md0: active raid1 sda1[0] sdb1[1] 483492096 blocks [2/2] [UU] unused devices: <none> I am try mdadm --run /dev/md1 and mdadm --readwrite /dev/md1 but mdadm: failed to set writable for /dev/md1: Device or resource busy How I can to decide this problem, or it is not a problem for swap partition? Big thnks!
Problem is decided. Problem was in partition installerin Ubuntu 10.04. You need to create partitions and save over ~100MB as free space. Or firstly create partions with Gpart and after that install the system.