Problems with backup and monitor

Hi,
I'm just having 2 problems, maybe related, with a new ISPconfing installation, created with the automatic installation (nginx, PHP 7.4 & PHP 8).
There also the htf_report.txt
The server.php is running without problems, but the automatic backup is not working.
I can launch the backup via the command:
php /usr/local/ispconfig/server/cron_debug.php --cronjob=500-backup.inc.php

And it works, but doesn't automatically.
Then the server is always red on the monitor page, It's saying that there is an error, but there aren't errors on the log, only debugs (because I previously had the debug level activated in order to see if there are errors).

Can anybody help solving this?
Thanks!

 

Sure, thanks!
Crontab

Code:

root@server ~ # crontab -l
55 0 * * * "/root/.acme.sh"/acme.sh --cron --home "/root/.acme.sh" > /dev/null
* * * * * /usr/local/ispconfig/server/server.sh 2>&1 | while read line; do echo `/bin/date` "$line" >> /var/log/ispconfig/cron.log; done
* * * * * /usr/local/ispconfig/server/cron.sh 2>&1 | while read line; do echo `/bin/date` "$line" >> /var/log/ispconfig/cron.log; done
0 0 * * * /usr/local/ispconfig/server/scripts/create_daily_nginx_access_logs.sh &> /dev/null

Regarding the monitor page I have no errors, only tons of debug.

Code:

State: error (0 unknown, 0 info, 0 warning, 0 critical, 1 error)

Ok
The state of your Hard-Disk space is ok [More...]
Your virus protection is ok [More...]
Your Mail queue load is ok [More...]
Your RAID is ok [More...]
Your Server load is ok [More...]
All needed services are online [More...]
Your system is up to date. [More...]

Error
There are errors in your system log [More...]

 

That's weird, there are no results.

 

Any advice?

 

Examine the log files in /var/log -directory. Useful file is for example syslog. Other files of interest are the latest after the event you want to examine, find the files with command

Code:

ls -lth /var/log | head

Also: the htf_report shows

Code:

##### VERSION CHECK #####

[INFO] php (cli) version is 8.0.10
[INFO] php-cgi (used for cgi php in default vhost!) is version 7.4.23

which means you are running PHP version 8.0 on command line. That is not supported on Ubuntu 20.04. Change default PHP back to what it is originally on Ubuntu 20.04.

Code:

update-alternatives --config php
and
update-alternatives --config php-cgi

 

Hi @Taleman , thanks for your support! That was the first change I made to setup back the 7.4 version (the automatic installer setted the 8.0), but the problems explained are still there. Also I examined log files finding nothing significally.
It's the first time I'm using the automatic installer and first time I'm having this problem.

 

I'm pretty sure, I executed the installer with this command:

Code:

wget -O - https://get.ispconfig.org | sh -s -- --use-nginx --use-php=7.4,8.0 --use-ftp-ports=41100-41200 --unattended-upgrades --no-mail --no-dns --interactive

And It was default on php 8.0.

I only have debugs on the system log, no warnings.

 

Well, in my experience, that is the Ubuntu usual behavior when Ondrej Sury multiple php versions are installed and/or updated.

However, I do think the ISPConfig official installer does fix that after installing them as I haven't heard of this happened like in your case.

In any event, though I know update-alternatives should work permanently on Debian, I am still using monit to monitor default php on Ubuntu.

 

Thanks @till

 

Have you checked what the PHP versions are now? Run again the htf_report or examine with the update-alternatives.

 

Yes they are



There is also the updated htf_report.txt

 

Very good, thanks!
Will check in a few hours and make you know.