Hello, I just did a fresh install and a fresh ISPConfig on my system that is running Debian 7, and I can send emails with round cube and receive them, but when I use my iPhone I can only receive them.. Any ideas.. I have been searching for a week on this issue.. Please help me Here is the log file I get. PS. i can send local domain emails, but not external.. Jan 24 12:27:58 server1 postfix/smtpd[13335]: NOQUEUE: reject: RCPT from router.asus.com[10.0.0.1]: 554 5.7.1 <[email protected]>: Relay access denied; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<[10.0.0.85]>
Code: # See /usr/share/postfix/main.cf.dist for a commented, more complete version #smtpd_recipient_restrictions = permit_sasl_authenticated # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname #smtpd_delay_reject = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = server1.501automotive.com alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases alias_database = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases myorigin = /etc/mailname mydestination = localhost, localhost.localdomain, server1.501automotive.com mynetworks = 127.0.0.0/8 [::1]/128, 10.0.0.0/24 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + html_directory = /usr/share/doc/postfix/html virtual_alias_domains = virtual_alias_maps = hash:/var/lib/mailman/data/virtual-mailman, proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, proxy:mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /var/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 inet_protocols = all broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes smtpd_recipient_restrictions = mysql:/etc/postfix/mysql-virtual_recipient.cf permit_mynetworks permit_sasl_authenticated reject_unauth_destination smtpd_tls_security_level = may transport_maps = hash:/var/lib/mailman/data/transport-mailman, proxy:mysql:/etc/postfix/mysql-virtual_transports.cf relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf permit_mynetworks permit_tls_all_clientcerts smtpd_client_message_rate_limit = 100 maildrop_destination_concurrency_limit = 1 maildrop_destination_recipient_limit = 1 virtual_transport = dovecot header_checks = regexp:/etc/postfix/header_checks mime_header_checks = regexp:/etc/postfix/mime_header_checks nested_header_checks = regexp:/etc/postfix/nested_header_checks body_checks = regexp:/etc/postfix/body_checks owner_request_special = no smtp_tls_security_level = may smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3 smtpd_tls_protocols = !SSLv2,!SSLv3 smtp_tls_protocols = !SSLv2,!SSLv3 dovecot_destination_recipient_limit = 1 smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth content_filter = amavis:[127.0.0.1]:10024 receive_override_options = no_address_mappings message_size_limit = 0
Code: # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #smtp inet n - - - 1 postscreen #smtpd pass - - - - - smtpd #dnsblog unix - - - - 0 dnsblog #tlsproxy unix - - - - 0 tlsproxy submission inet n - - - - smtpd -o syslog_name=postfix/submission -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING smtps inet n - - - - smtpd -o syslog_name=postfix/smtps -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp relay unix - - - - - smtp # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} amavis unix - - - - 2 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - - - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks
I've compared your main.cf to mine and found the following differences: You don't have an entry for: smtpd_relay_restrictions relayhost: Mine is set to just '=' with no parameters following inet_interfaces: Mine is set to all. I have a different order for: mydestination: I have my FQDN before the other entries (doesn't matter really) virtual_alias_maps: Mine checks mysql before the hash file I don't have the following entries that you do: mailbox_command = procmail -a "$EXTENSION" You have different settings for: smtpd_sender_restrictions: I permit_sasl_authenticated before I check mysql smtpd_client_restrictions: I don't use permit_sasl_authenticated here (They must be in my database.) mynetworks: You have an entry for your LAN (10.0.0.0/24) smtpd_recipient_restrictions: You don't have check_recipient_access before the reference to mysql. Also, you could put permit_mynetworks permit_sasl_authenticated before the mysql check to improve efficiency. My server's setting force clients to authenticate in order both receive and send. So they're not quite the same as yours. You can test your server configuration by using http://mxtoolbox.com/NetworkTools.aspx. Click the SMTP Test link. (Make sure it's not an open relay; one of the results the test will post.) You can also test your outgoing mail by sending an email to [email protected] Also, make sure your firewall and gateway setup allow the necessary traffic through in both directions. Hope this helps, Nap
Your master.cf is configured the same as mine. Though I have an extra setting under cleanup which has to do with the forced authentication I referred to earlier.
It's still doing relay access denied.. even with this setup.. Code: # See /usr/share/postfix/main.cf.dist for a commented, more complete version #smtpd_recipient_restrictions = permit_sasl_authenticated # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname #smtpd_delay_reject = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = server1.501automotive.com alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases alias_database = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases myorigin = /etc/mailname mydestination = localhost, localhost.localdomain, server1.501automotive.com mynetworks = 127.0.0.0/8 [::1]/128, 10.0.0.0/24 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + html_directory = /usr/share/doc/postfix/html virtual_alias_domains = virtual_alias_maps = hash:/var/lib/mailman/data/virtual-mailman, proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, proxy:mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /var/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 inet_protocols = all inet_interfaces = all broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination, check_recipient_access mysql:/etc/postfix/mysql-virtual_recipient.cf smtpd_tls_security_level = may transport_maps = hash:/var/lib/mailman/data/transport-mailman, proxy:mysql:/etc/postfix/mysql-virtual_transports.cf relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks smtpd_sender_restrictions = permit_sasl_authenticated, check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf permit_mynetworks smtpd_client_message_rate_limit = 100 maildrop_destination_concurrency_limit = 1 maildrop_destination_recipient_limit = 1 virtual_transport = dovecot header_checks = regexp:/etc/postfix/header_checks mime_header_checks = regexp:/etc/postfix/mime_header_checks nested_header_checks = regexp:/etc/postfix/nested_header_checks body_checks = regexp:/etc/postfix/body_checks owner_request_special = no smtp_tls_security_level = may smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3 smtpd_tls_protocols = !SSLv2,!SSLv3 smtp_tls_protocols = !SSLv2,!SSLv3 dovecot_destination_recipient_limit = 1 smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth content_filter = amavis:[127.0.0.1]:10024 receive_override_options = no_address_mappings message_size_limit = 0 relayhost =
Here is my main.cf. From your settings (mynetworks) it looks like your server is on a LAN. Maybe try without the second (10.0.0.0/24) network. Make sure you're forwarding the ports (25,465, 587,993, 995) at your gateway. Also, you don't have an entry for smtpd_relay_restrictions. See mine below on how to set it. Code: # See /usr/share/postfix/main.cf.dist for a commented, more complete version #debug_peer_list = 127.0.0.1 # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters #smtpd_tls_cert_file = /etc/postfix/smtpd.cert #smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_tls_cert_file = /etc/ssl/certs/dovecot.cert smtpd_tls_key_file = /etc/ssl/private/dovecot.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf myhostname = hostname.domain.tld alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases alias_database = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases myorigin = /etc/mailname mydestination = hostname.domain.tld, localhost, localhost.localdomain relayhost = mynetworks = 127.0.0.0/8 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all html_directory = /usr/share/doc/postfix/html virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, proxy:mysql:/etc/postfix/mysql-virtual_email2email.cf, hash:/var/lib/mailman/data/virtual-mailman virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /var/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 inet_protocols = all smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth broken_sasl_auth_clients = yes smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination, check_recipient_access mysql:/etc/postfix/mysql-virtual_recipient.cf smtpd_tls_security_level = may transport_maps = hash:/var/lib/mailman/data/transport-mailman, proxy:mysql:/etc/postfix/mysql-virtual_transports.cf relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks smtpd_sender_restrictions = permit_sasl_authenticated, check_sender_access mysql:/etc/postfix/mysql-virtual_sender.cf smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf smtpd_client_message_rate_limit = 100 maildrop_destination_concurrency_limit = 1 maildrop_destination_recipient_limit = 1 virtual_transport = dovecot header_checks = regexp:/etc/postfix/header_checks mime_header_checks = regexp:/etc/postfix/mime_header_checks nested_header_checks = regexp:/etc/postfix/nested_header_checks body_checks = regexp:/etc/postfix/body_checks owner_request_special = no smtp_tls_security_level = may dovecot_destination_recipient_limit = 1 content_filter = amavis:[127.0.0.1]:10024 receive_override_options = no_address_mappings message_size_limit = 0 smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3 smtpd_tls_protocols = !SSLv2,!SSLv3 smtp_tls_protocols = !SSLv2,!SSLv3 smtp_tls_loglevel = 1 In my master.cf, under cleanup I have on the next line: Code: -o smtpd_client_restrictions=permit_sasl_authenticated,reject I also noticed that in your master.cf qmgr isn't set correctly. It needs to be: Code: qmgr unix n - n 300 1 qmgr You should also go back to the "Perfect" setup guide you used to make sure you have all the right settings.
I used ur config on my main.cf but changing the domains and all that to mine and it still gives me relay access denied. It works on computers within the network.. I changed my master and added under cleanup and changed to "unix".. Still no luck.. There must be a way..
No, it's unblocked. I ran this server before on Ubuntu. But I switched to Debian and trying ispconfig.. MXToolbox said its open
This is MXToolbox report Code: Connecting to xxx.xxx.xxx.xxx 220 server1.xxx.com ESMTP Postfix (Debian/GNU) [858 ms] EHLO MXTB-PWS3.mxtoolbox.com 250-server1.xxx.com 250-PIPELINING 250-SIZE 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN [686 ms] MAIL FROM: <[email protected]> 250 2.1.0 Ok [702 ms] RCPT TO: <[email protected]> 554 5.7.1 <[email protected]>: Relay access denied [702 ms] MXTB-PWS3v2 3900ms
I used this tutorial for setting up my server btw.. https://www.howtoforge.com/perfect-server-debian-wheezy-apache2-bind-dovecot-ispconfig-3
When I run the MXToolbox test, I get the same result except that I have a couple extra transactions between STARTTLS and ENHANCEDSTATUSCODES Code: 250-STARTTLS 250-AUTH PLAIN LOGIN 250-AUTH=PLAIN LOGIN 250-ENHANCEDSTATUSCODES
