saslauthd

jeanjacques · Jul 28, 2005

Hello,
I've followed "the perfect setup-debian Sarge" http://www.howtoforge.com/perfect_setup_debian_sarge
but i have an error dealing with saslauthd.

The first error messages are appearing when i launch post fix:

/etc/init.d/postfix restart
Stopping mail transport agent: Postfix.
Starting mail transport agent: Postfixpostsuper: warning: dict_open_dlinfo: wildcard dynamic map entry no longer supported.

after i'm doing this Hulk:~# /etc/init.d/saslauthd start
Starting SASL Authentication Daemon: /usr/sbin/saslauthd already running.

and now To see if SMTP-AUTH and TLS are runnning i do the following command:

telnet localhost 25 and afterward ehlo localhost but it doesn't return 250-STARTTLS

and

250-AUTH

Is there someone who could help me to dedug this by indicating me where should i look to be sure that the previous steps are ok ?

Best regards,

Jean-Jacques

falko · Jul 28, 2005

Can you re-run these steps exactly in this order (and go sure that you don't miss a step!)?
In order to install Postfix with SMTP-AUTH and TLS as well as a POP3 server that also does POP3s (port 995) and an IMAP server that is also capable of IMAPs (port 993) do the following steps:

apt-get install postfix postfix-tls libsasl2 sasl2-bin libsasl2-modules ipopd-ssl uw-imapd-ssl (1 line!)

<- pop3 and pop3s
<- No
<- Internet Site
<- NONE
<- server1.example.com
<- server1.example.com, localhost.example.com, localhost
<- No

postconf -e 'smtpd_sasl_local_domain ='
postconf -e 'smtpd_sasl_auth_enable = yes'
postconf -e 'smtpd_sasl_security_options = noanonymous'
postconf -e 'broken_sasl_auth_clients = yes'
postconf -e 'smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination'
postconf -e 'inet_interfaces = all'
echo 'pwcheck_method: saslauthd' > /etc/postfix/sasl/smtpd.conf
echo 'mech_list: plain login' >> /etc/postfix/sasl/smtpd.conf

mkdir /etc/postfix/ssl
cd /etc/postfix/ssl/
openssl genrsa -des3 -rand /etc/hosts -out smtpd.key 1024
chmod 600 smtpd.key
openssl req -new -key smtpd.key -out smtpd.csr
openssl x509 -req -days 3650 -in smtpd.csr -signkey smtpd.key -out smtpd.crt
openssl rsa -in smtpd.key -out smtpd.key.unencrypted
mv -f smtpd.key.unencrypted smtpd.key
openssl req -new -x509 -extensions v3_ca -keyout cakey.pem -out cacert.pem -days 3650

postconf -e 'smtpd_tls_auth_only = no'
postconf -e 'smtp_use_tls = yes'
postconf -e 'smtpd_use_tls = yes'
postconf -e 'smtp_tls_note_starttls_offer = yes'
postconf -e 'smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key'
postconf -e 'smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt'
postconf -e 'smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem'
postconf -e 'smtpd_tls_loglevel = 1'
postconf -e 'smtpd_tls_received_header = yes'
postconf -e 'smtpd_tls_session_cache_timeout = 3600s'
postconf -e 'tls_random_source = dev:/dev/urandom'

The file /etc/postfix/main.cf should now look like this:
Code:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version

smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
biff = no

# appending .domain is the MUA's job.
append_dot_mydomain = no

# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h

myhostname = server1.example.com
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination = server1.example.com, localhost.example.com, localhost
relayhost =
mynetworks = 127.0.0.0/8
mailbox_command = procmail -a "$EXTENSION"
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
smtpd_sasl_local_domain = $myhostname
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination
smtpd_tls_auth_only = no
smtp_use_tls = yes
smtpd_use_tls = yes
smtp_tls_note_starttls_offer = yes
smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key
smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt
smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom
/etc/init.d/postfix restart

Authentication will be done by saslauthd. We have to change a few things to make it work properly. Because Postfix runs chrooted in /var/spool/postfix we have to do the following:

mkdir -p /var/spool/postfix/var/run/saslauthd
rm -fr /var/run/saslauthd

Now we have to edit /etc/default/saslauthd in order to activate saslauthd. Remove # in front of START=yes and add the line PARAMS="-m /var/spool/postfix/var/run/saslauthd":
Code:
# This needs to be uncommented before saslauthd will be run automatically
START=yes

PARAMS="-m /var/spool/postfix/var/run/saslauthd"

# You must specify the authentication mechanisms you wish to use.
# This defaults to "pam" for PAM support, but may also include
# "shadow" or "sasldb", like this:
# MECHANISMS="pam shadow"

MECHANISMS="pam"
Finally we have to edit /etc/init.d/saslauthd. Change the line

dir=`dpkg-statoverride --list $PWDIR`

to

#dir=`dpkg-statoverride --list $PWDIR`

Then change the variables PWDIR and PIDFILE and add the variable dir at the beginning of the file:

PWDIR="/var/spool/postfix/var/run/${NAME}"
PIDFILE="${PWDIR}/saslauthd.pid"
dir="root sasl 755 ${PWDIR}"

/etc/init.d/saslauthd should now look like this:
Code:
#!/bin/sh -e

NAME=saslauthd
DAEMON="/usr/sbin/${NAME}"
DESC="SASL Authentication Daemon"
DEFAULTS=/etc/default/saslauthd
PWDIR="/var/spool/postfix/var/run/${NAME}"
PIDFILE="${PWDIR}/saslauthd.pid"
dir="root sasl 755 ${PWDIR}"

createdir() {
# $1 = user
# $2 = group
# $3 = permissions (octal)
# $4 = path to directory
        [ -d "$4" ] || mkdir -p "$4"
        chown -c -h "$1:$2" "$4"
        chmod -c "$3" "$4"
}

test -f "${DAEMON}" || exit 0

# Source defaults file; edit that file to configure this script.
if [ -e "${DEFAULTS}" ]; then
    . "${DEFAULTS}"
fi

# If we're not to start the daemon, simply exit
if [ "${START}" != "yes" ]; then
    exit 0
fi

# If we have no mechanisms defined
if [ "x${MECHANISMS}" = "x" ]; then
    echo "You need to configure ${DEFAULTS} with mechanisms to be used"
    exit 0
fi

# Add our mechanimsms with the necessary flag
PARAMS="${PARAMS} -a ${MECHANISMS}"

START="--start --quiet --pidfile ${PIDFILE} --startas ${DAEMON} --name ${NAME} -- ${PARAMS}"

# Consider our options
case "${1}" in
  start)
        echo -n "Starting ${DESC}: "
        #dir=`dpkg-statoverride --list $PWDIR`
        test -z "$dir" || createdir $dir
        if start-stop-daemon ${START} >/dev/null 2>&1 ; then
                echo "${NAME}."
        else
                if start-stop-daemon --test ${START} >/dev/null 2>&1; then
                        echo "(failed)."
                        exit 1
                else
                        echo "${DAEMON} already running."
                        exit 0
                fi
        fi
        ;;
  stop)
        echo -n "Stopping ${DESC}: "
        if start-stop-daemon --stop --quiet --pidfile "${PIDFILE}" \
                --startas ${DAEMON} --retry 10 --name ${NAME} \
                >/dev/null 2>&1 ; then
                        echo "${NAME}."
        else
                if start-stop-daemon --test ${START} >/dev/null 2>&1; then
                        echo "(not running)."
                        exit 0
                else
                        echo "(failed)."
                        exit 1
                fi
        fi
        ;;
  restart|force-reload)
          $0 stop
        exec $0 start
        ;;
  *)
        echo "Usage: /etc/init.d/${NAME} {start|stop|restart|force-reload}" >&2
        exit 1
        ;;
esac

exit 0
Now start saslauthd:

/etc/init.d/saslauthd start

To see if SMTP-AUTH and TLS work properly now run the following command:

telnet localhost 25
Click to expand...

jeanjacques · Aug 2, 2005

Hello,
Everything is ok now thank you.

But i have a BIG trouble now, i can't connect to my webmin interface anymore...is there a chance that the changes that i've made could impact the webmin access ?

Best regards,

JJ

falko · Aug 2, 2005

jeanjacques said:

Hello,
Everything is ok now thank you.

But i have a BIG trouble now, i can't connect to my webmin interface anymore...is there a chance that the changes that i've made could impact the webmin access ?

Best regards,

JJ
Click to expand...

Do
Code:
ps aux
and
Code:
netstat -tap
show that webmin is running? If they do, then maybe it's a firewall issue. If webmin isn't up, then restart it:
Code:
/etc/init.d/webmin restart

Log in or Sign up

saslauthd

jeanjacques New Member

falko Super Moderator ISPConfig Developer

jeanjacques New Member

falko Super Moderator ISPConfig Developer

Share This Page

Log in or Sign up

saslauthd

jeanjacques New Member

falko Super Moderator ISPConfig Developer

jeanjacques New Member

falko Super Moderator ISPConfig Developer

Share This Page

Useful Searches