Hello! I've searched the internet for the last 2 days untill I finally decided to post a thread and hope for help. I have three problems: 1. I can't access the url: http://www.domain.tld:81/webmail/ error: The requested URL /webmail was not found on this server. 3. I can't send or receive an email using a pop3 application (Outlook). error: The connection to the server has failed. Account:'mail.selfxp.com', Server:'mail.selfxp.com' Protocol SMTP, Port. 25, Sercure(SSL); No, Sochet Error: 10060 There was a problem loggin onto your mail server. Your Password was rejected. Account: 'mail.selfxp.com' Servce:'mail.selfxp.com' Protocol: POP3, Server Response: 'ERR authorization failed' Port:110, Secure(SSL); No, Server Error:0x800CCC90 2. I can't access the url: http://www.domain.tld/stats/ error: 404 Error - File not found! Facts: - I don't use https. - I'm behind a router but I have the ports 81, 25, 110 opened to the SuSE 10.2 machine. - SMTP, POP3 Servers are Online - Postfix is running and Maildir is checked. Thanks in advance! Cosmin
1. What is www.domain.tld? A website on the server, or the IspConfig install? Try http://domain.tld:81 or http://ip.addr.of.srv:81, or http://ip.addr.of.srv:81/webmail 2. Enable authentication in Outlook, or your logon is wrong. When logging in with outlook etc, you need to use the Username - e.g. web1_admin, not email adress? 3. Same as 1.
Thanks for answering so fast! 1. I can access the ISPConfig using internal and external Ip address. Ex. http://ip.addr.of.srv:81 works. But http://ip.addr.of.srv:81/webmail/ doesn't. 2. Authentification is enabled. I use: email: [email protected] username: web3_selfxp password: **** pop3: mail.mydomain.com smtp: mail.mysomain.com And I have created an -> A record * IP-Adresse: ip.addr.of.srv * Hostname: mail -> MX record * Hostname: [empty] * Mailserver:mail.mydomain.com Greetings, Cosmin
Regarding item 2... The way that I've got my ISPConfig set up, the "username" field needs to be the same as the "email" field. If that change to your mail client settings doesn't do it, I believe my first step would be to look in /etc/postfix/virtusertable and verify that my e-mail address was mapped there. I would expect you would find a line looking like: [email protected] web3_selfxp (this is assuming that User Prefix in your system settings is set to [WEBID]_). If there is such a line, then you might want to verify POP authentication via telnet. If you execute "telnet <server IP address> 110", you should see something like: Trying 127.0.0.1... Connected to localhost.localdomain. Escape character is '^]'. +OK Hello there. In response to this, enter: USER [email protected] This should get you a response of: +OK Password required. In response to this, enter: PASS <your password> If the server responds with: -ERR Login failed. then your password is incorrect. If it responds with: +OK logged in. your login is correct. Once you have the POP server responding with "logged in", the value you used after "USER" is what you want to enter in your email client's "login" field.
True, I've found this info: [email protected] web3_selfxp [email protected] web3_selfxp [email protected] web3_selfxp [email protected] web3_selfxp The username that logged in successfuly was "web3_selfxp" Used it with my email client... but I received the same error ---- Again many thanks for the supper fast answer! Cosmin
An alternative Some mail clients "help" you by auto-editing the user name field. Some of these brain-dead clients assume that if you enter a full e-mail address in the user name field, you really didn't mean to enter the domain portion and strip if off for you. Just to see if that's what's happening, instead of using "[email protected]", use "selfxp%yourdomain.com" (replace the "@" with "%").
On the Webmail side, I guess the obvious question is 'Have you installed the Webmail Addon? If you have, you will see it listed under Tools in the IspConfig Panel. The mailuser login needs to be ticked in the website config as well I suspect. On the Outlook side, the setup I have seen working is to obviously list the server mail incoming and outgoing, user is the ISPconfig user, not the email address, password, and My Server Requires Authentication ticked for both, but Secure Password not ticked. For testing, I'd say you're safest using the IP address, or FQDN of the server. You can use cnames, additional A records etc when you have the basic functionality working.
It's working! Hi and thanks to all for helping me solve the problem. It was more complex than I thougt but now it works just fine: In order to have my emails work with outlook I had to folow these steps: a. Had to set into my goDadday account an MX record: Host: @ GoesTo: mail.mydomain.com An A record: Host: mail Points To: MyIpAddress b. I've used in order to install IPSConfig the http://www.howtoforge.com/perfect_setup_opensuse_10.2 but on the page six I had to set this variables without the server1 extension: postconf -e 'mydomain = mydomain.com' postconf -e 'myhostname = $mydomain' Maybe there is an workaround but it didn't solve my problem untill I took the "server1" out. c. On my outlook configuration I had to use: email: [email protected] mail: mydomain.com smtp: mydomain.com username: web3_selfxp Now I can send and receive emails. Again thank you all for you help. Greetings, Cosmin
