Slow e-mail

I've got a problem with my mail server. Outgoing mail is send directly, but incoming mail takes about 5 minutes before it is in my mail box... Below is the configuration file of my postfix setup:

Code:

smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
biff = no

# appending .domain is the MUA's job.
append_dot_mydomain = no

# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h

myhostname = YH-Linux01.younghosting.nl
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
#mydestination = YH-Linux01.younghosting.nl, localhost.younghosting.nl, localhost
relayhost =
mynetworks = 127.0.0.0/8
mailbox_command = procmail -a "$EXTENSION"
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
smtpd_sasl_local_domain =
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination
smtpd_sasl_auth_enable = yes
smtpd_tls_auth_only = no
smtp_use_tls = yes
smtpd_use_tls = yes
smtp_tls_note_starttls_offer = yes
smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key
smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt
smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom
home_mailbox = Maildir/

virtual_maps = hash:/etc/postfix/virtusertable

mydestination = /etc/postfix/local-host-names

#qmqpd_authorized_clients = $mynetworks
#qmqpd_error_delay = 5s
#qmqpd_timeout = 100s

### Checks to remove badly formed email
#smtpd_helo_required     = yes
#strict_rfc821_envelopes = yes
#disable_vrfy_command = yes

#unknown_address_reject_code  = 554
#unknown_hostname_reject_code = 554
#unknown_client_reject_code   = 554disable_dns_lookups = yes

Could anybody tell me if there is something strange about this configuration? I'd also noticed that Clamav is killing my server now and then, when it starts to run, the load goes up to about 50!! Any idea how to fine tune that?

Below is the configuration file of Clamav:

Code:

# Uncomment this option to enable logging.
# LogFile must be writable for the user running the daemon.
# Full path is required.
#LogFile /tmp/clamd.log

# By default the log file is locked for writing - the lock protects against
# running clamd multiple times (if want to run another clamd, please
# copy the configuration file, change the LogFile variable, and run
# the daemon with --config-file option). That's why you shouldn't uncomment
# this option.
#LogFileUnlock

# Maximal size of the log file. Default is 1 Mb.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
# in bytes just don't use modifiers.
LogFileMaxSize 2M

# Log time with an each message.
#LogTime

# Use system logger (can work together with LogFile).
#LogSyslog

# Enable verbose logging.
#LogVerbose

# This option allows you to save the process identifier of the listening
# daemon (main thread).
#PidFile /var/run/clamd.pid

# Path to a directory containing .db files.
# Default is the hardcoded directory (mostly /usr/local/share/clamav,
# it depends on installation options).
#DataDirectory /var/lib/clamav

# The daemon works in local or network mode. Currently the local mode is
# recommended for security reasons.

# Path to the local socket. The daemon doesn't change the mode of the
# created file (portability reasons). You may want to create it in a directory
# which is only accessible for a user running daemon.
LocalSocket /home/admispconfig/ispconfig/temp/clamd

# Remove stale socket after unclean shutdown.
#FixStaleSocket

# TCP port address.
#TCPSocket 3310

# TCP address.
# By default we bind to INADDR_ANY, probably not wise.
# Enable the following to provide some degree of protection
# from the outside world.
#TCPAddr 127.0.0.1

# Maximum length the queue of pending connections may grow to.
# Default is 15.
#MaxConnectionQueueLength 30

# When activated, input stream (see STREAM command) will be saved to disk before
# scanning - this allows scanning within archives.
#StreamSaveToDisk

# Close the connection if this limit is exceeded.
#StreamMaxLength 10M

# Maximal number of a threads running at the same time.
# Default is 5, and it should be sufficient for a typical workstation.
# You may need to increase threads number for a server machine.
#MaxThreads 10

# Thread (scanner - single task) will be stopped after this time (seconds).
# Default is 180. Value of 0 disables the timeout. SECURITY HINT: Increase the
# timeout instead of disabling it.
#ThreadTimeout 500

# Maximal depth the directories are scanned at.
MaxDirectoryRecursion 15

# Follow a directory symlinks.
# SECURITY HINT: You should have enabled directory recursion limit to
# avoid potential problems.
#FollowDirectorySymlinks

# Follow regular file symlinks.
#FollowFileSymlinks

# Do internal checks (eg. check the integrity of the database structures)
# By default clamd checks itself every 3600 seconds (1 hour).
#SelfCheck 600

# Execute a command when virus is found. In the command string %v and %f will
# be replaced by the virus name and the infected file name respectively.
#
# SECURITY WARNING: Make sure the virus event command cannot be exploited,
#                    eg. by using some special file name when %f is used.
#                    Always use a full path to the command.
#                    Never delete/move files with this directive !
#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %f: %v"

# Run as selected user (clamd must be started by root).
# By default it doesn't drop privileges.
User admispconfig

# Initialize the supplementary group access (for all groups in /etc/group
# user is added in. clamd must be started by root).
#AllowSupplementaryGroups

# Don't fork into background. Useful in debugging.
#Foreground

# Enable debug messages in libclamav.
#Debug

##
## Mail support
##

# Uncomment this option if you are planning to scan mail files.
ScanMail 1

##
## Archive support
##


# Comment this line to disable scanning of the archives.
ScanArchive 1


# By default the built-in RAR unpacker is disabled by default because the code
# terribly leaks, however it's probably a good idea to enable it.
#ScanRAR


# Options below protect your system against Denial of Service attacks
# with archive bombs.

# Files in archives larger than this limit won't be scanned.
# Value of 0 disables the limit.
# WARNING: Due to the unrarlib implementation, whole files (one by one) in RAR
#           archives are decompressed to the memory. That's why never disable
#           this limit (but you may increase it of course!)
ArchiveMaxFileSize 10M

# Archives are scanned recursively - e.g. if Zip archive contains RAR file,
# the RAR file will be decompressed, too (but only if recursion limit is set
# at least to 1). With this option you may set the recursion level.
# Value of 0 disables the limit.
ArchiveMaxRecursion 5

# Number of files to be scanned within archive.
# Value of 0 disables the limit.
ArchiveMaxFiles 1000

# Use slower decompression algorithm which uses less memory. This option
# affects bzip2 decompressor only.
#ArchiveLimitMemoryUsage

##
## Clamuko settings
## WARNING: This is experimental software. It is very likely it will hang
##            up your system !!!
##

# Enable Clamuko. Dazuko (/dev/dazuko) must be configured and running.
#ClamukoScanOnLine

# Set access mask for Clamuko.
ClamukoScanOnOpen 1
ClamukoScanOnClose 1
ClamukoScanOnExec 1

# Set the include paths (all files in them will be scanned). You can have
# multiple ClamukoIncludePath options, but each directory must be added
# in a seperate option. All subdirectories are scanned, too.
ClamukoIncludePath /home
#ClamukoIncludePath /students

# Set the exclude paths. All subdirectories are also excluded.
#ClamukoExcludePath /home/guru

# Limit the file size to be scanned (probably you don't want to scan your movie
# files ;))
# Value of 0 disables the limit. 1 Mb should be fine.
ClamukoMaxFileSize 1M

# Enable archive support. It uses the limits from clamd section.
# (This option doesn't depend on ScanArchive, you can have archive support
# in clamd disabled).
# ClamukoScanArchive

The server hardware isn't that bad. AMD XP 2600+, 512MB DDR, 2x 120GB IDE in RAID-1 on a 3Ware PCI hardware raid controller..

 

Damn it worked Thanks alot till!!!

 

Till, I think it's time to offer an option for the daemon in the installer. Seems like this is starting to creep up on everyone.