ISPConfig 3 Debian 10 Just finished installing ISPConfig 3 on Debian 10 for the purpose of a mail server following The Perfect Server - Debian 10 (Buster) with Apache, BIND, Dovecot, PureFTPD and ISPConfig 3.2 (howtoforge.com) From mail.log: Code: postfix/postqueue[3470]: warning: Mail system is down -- accessing queue directly From Script: Code: ##### SERVER ##### IP-address (as per hostname): ***.***.***.*** [WARN] could not determine server's ip address by ifconfig [INFO] OS version is Debian GNU/Linux 10 (buster) [INFO] uptime: 14:49:34 up 37 min, 1 user, load average: 0.00, 0.02, 0.05 [INFO] memory: total used free shared buff/cache available Mem: 3.9Gi 1.7Gi 1.6Gi 21Mi 619Mi 1.9Gi Swap: 974Mi 0B 974Mi [INFO] systemd failed services status: UNIT LOAD ACTIVE SUB DESCRIPTION ● [email protected] loaded failed failed Postfix Mail Transport Agent (instance -) LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. [INFO] ISPConfig is installed. ##### ISPCONFIG ##### ISPConfig version is 3.2.5 ##### VERSION CHECK ##### [INFO] php (cli) version is 7.3.29-1~deb10u1 [INFO] php-cgi (used for cgi php in default vhost!) is version 7.3.29 ##### PORT CHECK ##### [WARN] Port 25 (SMTP server) seems NOT to be listening [WARN] Port 465 (SMTP server SSL) seems NOT to be listening [WARN] Port 25 (SMTP server) seems NOT to be listening ##### MAIL SERVER CHECK ##### [WARN] I found no "submission" entry in your postfix master.cf [INFO] this is not critical, but if you want to offer port 587 for smtp connections you have to enable this. [WARN] I found no "smtps" entry in your postfix master.cf [INFO] this is not critical, but if you want to offer SSL for smtp (not TLS) connections you have to enable this. ##### RUNNING SERVER PROCESSES ##### [INFO] I found the following web server(s): Apache 2 (PID 2684) [WARN] I could not determine which mail server is running. [INFO] I found the following pop3 server(s): Dovecot (PID 2627) [INFO] I found the following imap server(s): Dovecot (PID 2627) [INFO] I found the following ftp server(s): PureFTP (PID 2757) ##### LISTENING PORTS ##### (only () Local (Address) [anywhere]:110 (2627/dovecot) [anywhere]:143 (2627/dovecot) [anywhere]:21 (2757/pure-ftpd) [anywhere]:22 (478/sshd) [anywhere]:993 (2627/dovecot) [anywhere]:995 (2627/dovecot) [localhost]:10023 (372/postgrey) [localhost]:10024 (2614/amavisd-new) [localhost]:10026 (2614/amavisd-new) [localhost]:3306 (2498/mysqld) [localhost]:11211 (378/memcached) [localhost]10 (2627/dovecot) [localhost]43 (2627/dovecot) *:*:*:*::*:8080 (2684/apache2) *:*:*:*::*:80 (2684/apache2) *:*:*:*::*:8081 (2684/apache2) *:*:*:*::*:21 (2757/pure-ftpd) *:*:*:*::*:22 (478/sshd) *:*:*:*::*:443 (2684/apache2) *:*:*:*::*:993 (2627/dovecot) *:*:*:*::*:995 (2627/dovecot) *:*:*:*::*:10023 (372/postgrey) *:*:*:*::*:10024 (2614/amavisd-new) *:*:*:*::*:10026 (2614/amavisd-new) ##### IPTABLES ##### Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination ##### LET'S ENCRYPT ##### acme.sh is installed in /root/.acme.sh/acme.sh cat /etc/postfix/master.cf Code: # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master" or # on-line: http://www.postfix.org/master.5.html). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (no) (never) (100) # ========================================================================== smtp inet n - y - - smtpd #smtp inet n - y - 1 postscreen #smtpd pass - - y - - smtpd #dnsblog unix - - y - 0 dnsblog #tlsproxy unix - - y - 0 tlsproxy #submission inet n - y - - smtpd # -o syslog_name=postfix/submission # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_tls_auth_only=yes # -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions # -o smtpd_recipient_restrictions= # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - y - - smtpd # -o syslog_name=postfix/smtps # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions # -o smtpd_recipient_restrictions= # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - y - - qmqpd pickup unix n - y 60 1 pickup cleanup unix n - y - 0 cleanup qmgr unix n - n 300 1 qmgr #qmgr unix n - n 300 1 oqmgr tlsmgr unix - - y 1000? 1 tlsmgr rewrite unix - - y - - trivial-rewrite bounce unix - - y - 0 bounce defer unix - - y - 0 bounce trace unix - - y - 0 bounce verify unix - - y - 1 verify flush unix n - y 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - y - - smtp relay unix - - y - - smtp -o syslog_name=postfix/$service_name # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - y - - showq error unix - - y - - error retry unix - - y - - error discard unix - - y - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - y - - lmtp anvil unix - - y - 1 anvil scache unix - - y - 1 scache postlog unix-dgram n - n - 1 postlogd # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} mysql soft nofile 65535 mysql hard nofile 65535 dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} amavis unix - - - - 2 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes -o smtp_bind_address= 127.0.0.1:10025 inet n - n - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o smtpd_end_of_data_restrictions= -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks -o smtp_send_xforward_command=yes -o disable_dns_lookups=yes 127.0.0.1:10027 inet n - n - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o smtpd_end_of_data_restrictions= -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks -o smtp_send_xforward_command=yes -o milter_default_action=accept -o milter_macro_daemon_name=ORIGINATING -o disable_dns_lookups=yes postconf -n
You have garbage in your master.cf file: Code: mysql soft nofile 65535 mysql hard nofile 65535 Also you have not changed it according to the tutorial to enable smpts and submission.
And you left out the step from the guide where it instructs you to edit master.cf file and remove the # in front of the parts for submission and smtps.
