SSL Certificates

Discussion in 'Installation/Configuration' started by msource, Jan 15, 2008.

  1. msource

    msource New Member

    Hi,

    I'm whant to know how the SSL for eache IP Work.

    I have the following configuration on my network:

    DMZ Zone:
    My Server (icaro.liz-online.pt)
    Private IP: 192.168.186.40
    Public IP: 62.48.192.43

    How do i configure my server/ispconfig to work whit more than one ip because of the SSL Certificates?

    I dont wont to use Multi-IP SSL.
     
    msource, Jan 15, 2008
    #1
  2. Hans

    Hans Moderator Moderator

    Add the additional IP-addresses in ISPConfig within the IP-list (one per line).

    Please also have a look here: http://www.howtoforge.com/faq/14_49_en.html

    And add additional ip-addresses within /etc/network/interfaces

    # 1st additional IP-address:
    auto eth0:0
    iface eth0:0 inet static
    address ip-address 2
    netmask <value>
    network <value>
    gateway <value>
    broadcast <value>

    Restart your network afterwards
     
    Hans, Jan 15, 2008
    #2
  3. msource

    msource New Member

    Tanks for the quick anwser.

    1 - I Have the Public IP: 62.48.192.43 aplied to the Private IP: 192.168.186.40
    2 - I i configured for exemple mor 10 Private IP's (192.168.186.40 - 192.168.50), i need to associete another Public IP? What can i do?
    3 - How do the ssl certificate whork on the mather?

    Tanks for all you efford, and sorry for this lame questions.
     
    msource, Jan 15, 2008
    #3
  4. msource

    msource New Member

    Another thing,

    Could i just have one Ethernet Card or i have to buy varios Ethernet Cards?
     
    msource, Jan 15, 2008
    #4
  5. Hans

    Hans Moderator Moderator

    Even with one Networkcard you are able to use more than one IP-address.
    Define these additional (internal) IP-addresses within your /etc/network/interfaces as i show you here:

    # 1st additional IP-address:
    auto eth0:0
    iface eth0:0 inet static
    address 192.168.186.41
    netmask <value>
    network <value>
    gateway <value>
    broadcast <value>

    # 2st additional IP-address:
    auto eth0:1
    iface eth0:0 inet static
    address 192.168.186.42
    netmask <value>
    network <value>
    gateway <value>
    broadcast <value>

    and so on.


    Add these internal IP-addresses also within the IP-list within ISPConfig then you're able to use a SSL certificate for every site with an own internal IP-address.
     
    Last edited: Jan 15, 2008
    Hans, Jan 15, 2008
    #5
  6. msource

    msource New Member

    Hi,

    Tanks for you quick and nice anwser.

    I was able to configure 4 Ip's on the same machine and the Certificates work very nice, but i have one question.

    For each Private IP that i configure to SSL domain, i have to associate a new Public IP, correct?

    Ex:
    192.168.186.50 -- 62.48.192.45
    192.168.186.51 -- 62.48.192.46
    192.168.186.52 -- 62.48.192.47

    All of this IP's are in the same machine.
     
    Last edited: Jan 16, 2008
    msource, Jan 16, 2008
    #6
  7. till

    till Super Moderator Staff Member ISPConfig Developer

    Yes, thats correct.
     
    till, Jan 17, 2008
    #7
  8. msource

    msource New Member

    Hi,

    Guy's your thes best.
    The SSL certificates work fine and easy whit this configuration.

    One question, the SSL Certificates consume a lot of resources from the machine?

    Very tanks for all your help.
     
    msource, Jan 18, 2008
    #8

Share This Page