Why all file permissions are set to 600 and folder permissions are set to 700 when I am uploading something I must manually change permissions after uplaoding files
Code: # Example config file /etc/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. #listen_ipv6=YES # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) #local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format #xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. #chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem # This option specifies the location of the RSA key to use for SSL # encrypted connections. rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
I have one more problem. I can access ftp through online ftp (net2ftp.com) but I can not login to my ftp account through filezilla. I tried to restart vsftpd (SSH): Code: login as: root [email protected]'s password: Last login: Tue Jan 29 04:20:10 2008 from balticom-13-41.balticom.lv Could not connect to database Linux server1.torrentz2.oo.lv 2.6.22-14-generic #1 SMP Tue Dec 18 08:02:57 UTC 2 007 i686 The programs included with the Ubuntu system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@server1:~# /etc/rc.d/init.d/ispconfig_tcpserver restart -bash: /etc/rc.d/init.d/ispconfig_tcpserver: No such file or directory root@server1:~# /etc/init.d/ispconfig_tcpserver restart Stopping ispconfig_tcpserver Starting ispconfig_tcpserver/home/admispconfig/ispconfig/tools/tcpserver/ispconf ig_tcpserver: relocation error: /home/admispconfig/ispconfig/tools/tcpserver/isp config_tcpserver: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference /home/admispconfig/ispconfig/tools/tcpserver/ispconfig_tcpserver: relocation err or: /home/admispconfig/ispconfig/tools/tcpserver/ispconfig_tcpserver: symbol err no, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Please enable Code: local_umask=022 in vsftpd.conf and restart vsftpd.conf. What's the output of Code: netstat -tap and Code: iptables -L ?
Code: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:63392 *:* LISTEN 29683/LFS.exe tcp 0 0 *:nfs *:* LISTEN - tcp 0 0 *:55938 *:* LISTEN - tcp 0 0 *:42118 *:* LISTEN 5500/rpc.mountd tcp 0 0 *:mysql *:* LISTEN 5096/mysqld tcp 0 0 *:netbios-ssn *:* LISTEN 5621/smbd tcp 0 0 *:sunrpc *:* LISTEN 4283/portmap tcp 0 0 *:www *:* LISTEN - tcp 0 0 server1.torrentz2.o:www 212.0.129.65:27674 SYN_RECV - tcp 0 0 *:webmin *:* LISTEN 6663/perl tcp 0 0 *:81 *:* LISTEN - tcp 0 0 *:ftp *:* LISTEN - tcp 0 0 server1.torrentz:domain *:* LISTEN - tcp 0 0 server1.torrentz:domain *:* LISTEN - tcp 0 0 localhost.locald:domain *:* LISTEN - tcp 0 0 *:821 *:* LISTEN 5733/rpc.rquotad tcp 0 0 *:46167 *:* LISTEN 4302/rpc.statd tcp 0 0 *:3128 *:* LISTEN 5982/(squid) tcp 0 0 localhost.lo:postgresql *:* LISTEN 5174/postgres tcp 0 0 *:smtp *:* LISTEN 28967/master tcp 0 0 localhost.localdoma:953 *:* LISTEN - tcp 0 0 *:https *:* LISTEN - tcp 0 0 *:microsoft-ds *:* LISTEN 5621/smbd Code: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination When I am trying to connect to my serveri with filezilla (from Windows XP): Code: Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER root Atbilde: 331 Please specify the password. Komanda: PASS ******** Atbilde: 530 Login incorrect. Kluda: Nevar savienoties ar serveri (could not connect to server) Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER juris Atbilde: 331 Please specify the password. Komanda: PASS ******** Atbilde: [U][B]Could not connect to database[/B][/U] Kluda: Nevar savienoties ar serveri Status: Gaida, lai atkartotu... Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER juris Atbilde: 331 Please specify the password. Komanda: PASS ******** Atbilde: Could not connect to database Kluda: Nevar savienoties ar serveri Status: Gaida, lai atkartotu... Kluda: Savienosanas meginajumu partraucis lietotajs Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER juris Atbilde: 331 Please specify the password. Komanda: PASS ******** Atbilde: Could not connect to database Kluda: Nevar savienoties ar serveri Status: Gaida, lai atkartotu... Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER juris Atbilde: 331 Please specify the password. Komanda: PASS ******** Atbilde: Could not connect to database Kluda: Nevar savienoties ar serveri Status: Gaida, lai atkartotu... Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER juris Atbilde: 331 Please specify the password. Komanda: PASS ******** Atbilde: Could not connect to database Kluda: Nevar savienoties ar serveri Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER web1_admin Atbilde: 331 Please specify the password. Komanda: PASS ******** Atbilde: [B][U]Could not connect to database[/U][/B] Kluda: Nevar savienoties ar serveri Status: Gaida, lai atkartotu... Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER web1_admin Atbilde: 331 Please specify the password. Komanda: PASS ******** Atbilde: Could not connect to database Kluda: Nevar savienoties ar serveri Status: Gaida, lai atkartotu... Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER web1_admin Atbilde: 331 Please specify the password. Komanda: PASS ******** Atbilde: Could not connect to database Kluda: Nevar savienoties ar serveri Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER root Atbilde: 331 Please specify the password. Komanda: PASS ******** Atbilde: 530 Login incorrect. Kluda: Nevar savienoties ar serveri Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER root Atbilde: 331 Please specify the password. Komanda: PASS ******* Atbilde: 530 Login incorrect. Kluda: Nevar savienoties ar serveri Status: Nosaka IP adresi my-domain.com Status: Savienojas ar MY-IP:21... Status: Nodibinats savienojums, gaida sagaidisanas zinojumu... Atbilde: 220 (vsFTPd 2.0.5) Komanda: USER root Atbilde: 331 Please specify the password. Komanda: PASS ******** Atbilde: 530 Login incorrect. Kluda: Nevar savienoties ar serveri
When I am using net2ftp.com, I can login and all files and folders are correct (chmod 744 and 644). I still can not login using filezilla. Filezilla error: could not connect to database.
os: Ubuntu 7.10 desktop edition I always get error FAIL LOGIN. I have OK LOGIN when I am connecting to server using net2ftp.com (with the same hostname, login, password)
I gave up with vsftpd. Im am trying proftpd now: proftpd log: Code: Jan 12 05:10:18 juris-desktop proftpd[19681] juris-desktop: ProFTPD 1.3.0 (stable) (built Fri Jun 15 12:52:16 GMT 2007) standalone mode STARTUP Jan 12 05:10:23 juris-desktop proftpd[19681] juris-desktop: ProFTPD killed (signal 15) Jan 12 05:10:23 juris-desktop proftpd[19681] juris-desktop: ProFTPD 1.3.0 standalone mode SHUTDOWN Jan 31 22:52:11 server1.torrentz2.oo.lv proftpd[3424] server1.torrentz2.oo.lv: Failed binding to ::, port 21: Address already in use Jan 31 22:52:11 server1.torrentz2.oo.lv proftpd[3424] server1.torrentz2.oo.lv: Check the ServerType directive to ensure you are configured correctly. Jan 31 23:04:17 server1.torrentz2.oo.lv proftpd[3615] localhost.localdomain: Failed binding to 0.0.0.0, port 21: Address already in use Jan 31 23:04:17 server1.torrentz2.oo.lv proftpd[3615] localhost.localdomain: Check the ServerType directive to ensure you are configured correctly. All I want is to create ftp server with one username to edit all directories and files in /var/www, I don't want nothing more
Code: Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:63392 *:* LISTEN - tcp 0 0 *:nfs *:* LISTEN - tcp 0 0 *:55938 *:* LISTEN - tcp 0 0 *:42118 *:* LISTEN 5500/rpc.mountd tcp 0 0 *:mysql *:* LISTEN 5096/mysqld tcp 0 0 *:netbios-ssn *:* LISTEN 5621/smbd tcp 0 0 *:5901 *:* LISTEN - tcp 0 0 *:sunrpc *:* LISTEN 4283/portmap tcp 0 0 *:www *:* LISTEN - tcp 0 0 server1.torrentz2.o:www 202.56.4.106:47604 SYN_RECV - tcp 0 0 *:webmin *:* LISTEN 6663/perl tcp 0 0 *:x11-1 *:* LISTEN - tcp 0 0 *:81 *:* LISTEN - tcp 0 0 *:ftp *:* LISTEN - tcp 0 0 server1.torrentz:domain *:* LISTEN - tcp 0 0 localhost.locald:domain *:* LISTEN - tcp 0 0 *:821 *:* LISTEN 5733/rpc.rquotad tcp 0 0 *:46167 *:* LISTEN 4302/rpc.statd tcp 0 0 *:3128 *:* LISTEN 5982/(squid) tcp 0 0 localhost.lo:postgresql *:* LISTEN 5174/postgres tcp 0 0 *:smtp *:* LISTEN - tcp 0 0 localhost.localdoma:953 *:* LISTEN - tcp 0 0 *:https *:* LISTEN - tcp 0 0 *:microsoft-ds *:* LISTEN 5621/smbd tcp 0 0 server1.torrentz2.o:www 83.136.142.126:2839 TIME_WAIT - tcp 0 0 server1.torrentz2.o:ftp balticom-13-41.bal:4215 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www 202.93.36.89:14906 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www gw.lnt.lv:52864 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www 203.145.134.213:45186 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www gw.lnt.lv:52865 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www 210.212.163.60:11911 TIME_WAIT - tcp 0 1 server1.torrentz2.o:www 212.93.97.132:17770 FIN_WAIT1 - tcp 0 0 server1.torrentz2.o:ftp balticom-13-41.bal:4216 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www cache1.simpur.net:49040 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www 87.110.157.225:2240 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www 203.145.134.213:48409 TIME_WAIT - tcp 0 532 server1.torrentz2.o:www 202.93.36.89:37904 LAST_ACK - I have default proftpd.conf (only changed ipv6 to OFF) When I am trying to connect to server I have this error: 500 FTP server shut down (Mon Jan 14 16:35:03 2008 , Current connections will be dropped: Mon Jan 14 16:25:03 2008) -- please try again later my proftpd.log: Code: Jan 12 05:10:18 juris-desktop proftpd[19681] juris-desktop: ProFTPD 1.3.0 (stable) (built Fri Jun 15 12:52:16 GMT 2007) standalone mode STAR$ Jan 12 05:10:23 juris-desktop proftpd[19681] juris-desktop: ProFTPD killed (signal 15) Jan 12 05:10:23 juris-desktop proftpd[19681] juris-desktop: ProFTPD 1.3.0 standalone mode SHUTDOWN Jan 31 22:52:11 server1.torrentz2.oo.lv proftpd[3424] server1.torrentz2.oo.lv: Failed binding to ::, port 21: Address already in use Jan 31 22:52:11 server1.torrentz2.oo.lv proftpd[3424] server1.torrentz2.oo.lv: Check the ServerType directive to ensure you are configured c$ Jan 31 23:04:17 server1.torrentz2.oo.lv proftpd[3615] localhost.localdomain: Failed binding to 0.0.0.0, port 21: Address already in use Jan 31 23:04:17 server1.torrentz2.oo.lv proftpd[3615] localhost.localdomain: Check the ServerType directive to ensure you are configured cor$ Jan 31 23:36:10 server1.torrentz2.oo.lv proftpd[4134] localhost.localdomain: Failed binding to 0.0.0.0, port 21: Address already in use Jan 31 23:36:10 server1.torrentz2.oo.lv proftpd[4134] localhost.localdomain: Check the ServerType directive to ensure you are configured cor$ Feb 01 18:09:59 server1.torrentz2.oo.lv proftpd[16554] localhost.localdomain: ProFTPD 1.3.0 (stable) (built Fri Jun 15 12:52:16 GMT 2007) st$ Feb 01 18:09:59 server1.torrentz2.oo.lv proftpd[16554] localhost.localdomain: /etc/shutmsg present: all incoming connections will be refused. Feb 01 18:10:30 server1.torrentz2.oo.lv proftpd[16574] localhost.localdomain (localhost.localdomain[127.0.0.1]): connection refused (Mon Jan$ Feb 01 18:12:07 server1.torrentz2.oo.lv proftpd[16554] localhost.localdomain: ProFTPD killed (signal 15) Feb 01 18:12:07 server1.torrentz2.oo.lv proftpd[16554] localhost.localdomain: ProFTPD 1.3.0 standalone mode SHUTDOWN Feb 01 18:12:58 server1.torrentz2.oo.lv proftpd[16821] localhost.localdomain: ProFTPD 1.3.0 (stable) (built Fri Jun 15 12:52:16 GMT 2007) st$ Feb 01 18:12:58 server1.torrentz2.oo.lv proftpd[16821] localhost.localdomain: /etc/shutmsg present: all incoming connections will be refused. Feb 01 18:18:46 server1.torrentz2.oo.lv proftpd[16821] localhost.localdomain: ProFTPD killed (signal 15) Feb 01 18:18:46 server1.torrentz2.oo.lv proftpd[16821] localhost.localdomain: ProFTPD 1.3.0 standalone mode SHUTDOWN Feb 01 18:18:50 server1.torrentz2.oo.lv proftpd[17240] localhost.localdomain: ProFTPD 1.3.0 (stable) (built Fri Jun 15 12:52:16 GMT 2007) st$ Feb 01 18:18:50 server1.torrentz2.oo.lv proftpd[17240] localhost.localdomain: /etc/shutmsg present: all incoming connections will be refused. Feb 01 18:20:06 server1.torrentz2.oo.lv proftpd[17240] localhost.localdomain: ProFTPD killed (signal 15) Feb 01 18:20:06 server1.torrentz2.oo.lv proftpd[17240] localhost.localdomain: ProFTPD 1.3.0 standalone mode SHUTDOWN Feb 01 18:33:16 server1.torrentz2.oo.lv proftpd[18028] localhost.localdomain: ProFTPD 1.3.0 (stable) (built Fri Jun 15 12:52:16 GMT 2007) st$ Feb 01 18:33:16 server1.torrentz2.oo.lv proftpd[18028] localhost.localdomain: /etc/shutmsg present: all incoming connections will be refused. Feb 01 18:35:25 server1.torrentz2.oo.lv proftpd[18028] localhost.localdomain: ProFTPD killed (signal 15) Feb 01 18:35:25 server1.torrentz2.oo.lv proftpd[18028] localhost.localdomain: ProFTPD 1.3.0 standalone mode SHUTDOWN Feb 01 18:35:27 server1.torrentz2.oo.lv proftpd[18102] localhost.localdomain: ProFTPD 1.3.0 (stable) (built Fri Jun 15 12:52:16 GMT 2007) st$ Feb 01 18:35:27 server1.torrentz2.oo.lv proftpd[18102] localhost.localdomain: /etc/shutmsg present: all incoming connections will be refused. Feb 01 18:36:25 server1.torrentz2.oo.lv proftpd[18142] localhost.localdomain (localhost.localdomain[127.0.0.1]): connection refused (Mon Jan$ Feb 01 18:36:27 server1.torrentz2.oo.lv proftpd[18147] localhost.localdomain (localhost.localdomain[127.0.0.1]): connection refused (Mon Jan$ Feb 01 18:36:32 server1.torrentz2.oo.lv proftpd[18167] localhost.localdomain (localhost.localdomain[127.0.0.1]): connection refused (Mon Jan$ Feb 01 18:36:34 server1.torrentz2.oo.lv proftpd[18171] localhost.localdomain (localhost.localdomain[127.0.0.1]): connection refused (Mon Jan$ Feb 01 18:38:31 server1.torrentz2.oo.lv proftpd[18102] localhost.localdomain: ProFTPD killed (signal 15) Feb 01 18:38:31 server1.torrentz2.oo.lv proftpd[18102] localhost.localdomain: ProFTPD 1.3.0 standalone mode SHUTDOWN Feb 01 18:38:31 server1.torrentz2.oo.lv proftpd[18439] localhost.localdomain: ProFTPD 1.3.0 (stable) (built Fri Jun 15 12:52:16 GMT 2007) st$ Feb 01 18:38:31 server1.torrentz2.oo.lv proftpd[18439] localhost.localdomain: /etc/shutmsg present: all incoming connections will be refused. Feb 01 18:38:44 server1.torrentz2.oo.lv proftpd[18448] localhost.localdomain (localhost.localdomain[127.0.0.1]): connection refused (Mon Jan$ Feb 01 18:38:56 server1.torrentz2.oo.lv proftpd[18473] localhost.localdomain (localhost.localdomain[127.0.0.1]): connection refused (Mon Jan$ Feb 01 18:38:58 server1.torrentz2.oo.lv proftpd[18476] localhost.localdomain (localhost.localdomain[127.0.0.1]): connection refused (Mon Jan$ Feb 01 18:39:14 server1.torrentz2.oo.lv proftpd[18579] localhost.localdomain (localhost.localdomain[127.0.0.1]): connection refused (Mon Jan$ Feb 01 18:39:27 server1.torrentz2.oo.lv proftpd[18583] localhost.localdomain (balticom-13-41.balticom.lv[77.93.13.41]): connection refused ($ Feb 01 18:39:34 server1.torrentz2.oo.lv proftpd[18584] localhost.localdomain (balticom-13-41.balticom.lv[77.93.13.41]): connection refused ($ Feb 01 18:46:30 server1.torrentz2.oo.lv proftpd[18914] localhost.localdomain (1-1-1-2a.far.sth.bostream.se[82.182.32.4]): connection refused$
I have vsftpd again now I have this problem with chmod- when I upload files and folders, chmod for all uploaded folders are 770 and for all uploaded files 660 and I need manually to change CHMOD. How can I fix it? vsftpd: netstat -tap | grep ftp Code: tcp 0 0 *:ftp *:* LISTEN - tcp 0 0 server1.torrentz2.o:ftp 89.254.130.118:1442 ESTABLISHED- tcp 0 0 server1.torrentz2.o:ftp 89.254.130.118:1442 ESTABLISHED- netstat -tap Code: Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:63392 *:* LISTEN - tcp 0 0 *:20000 *:* LISTEN - tcp 0 0 *:nfs *:* LISTEN - tcp 0 0 *:55938 *:* LISTEN - tcp 0 0 *:42118 *:* LISTEN 5500/rpc.mountd tcp 0 0 server1.torrentz2:27015 *:* LISTEN - tcp 0 0 *:mysql *:* LISTEN 5096/mysqld tcp 0 0 *:netbios-ssn *:* LISTEN 5621/smbd tcp 0 0 *:5901 *:* LISTEN - tcp 0 0 *:sunrpc *:* LISTEN 4283/portmap tcp 0 0 *:www *:* LISTEN - tcp 0 0 server1.torrentz2.o:www infoginimp-wd08.w:39479 SYN_RECV - tcp 0 0 server1.torrentz2.o:www 213.158.194.228:4096 SYN_RECV - tcp 0 0 *:webmin *:* LISTEN 6663/perl tcp 0 0 *:81 *:* LISTEN - tcp 0 0 *:x11-1 *:* LISTEN - tcp 0 0 server1.torrentz:domain *:* LISTEN - tcp 0 0 localhost.locald:domain *:* LISTEN - tcp 0 0 *:ftp *:* LISTEN - tcp 0 0 *:821 *:* LISTEN 5733/rpc.rquotad tcp 0 0 *:46167 *:* LISTEN 4302/rpc.statd tcp 0 0 *:3128 *:* LISTEN 5982/(squid) tcp 0 0 localhost.lo:postgresql *:* LISTEN 5174/postgres tcp 0 0 *:smtp *:* LISTEN - tcp 0 0 localhost.localdoma:953 *:* LISTEN - tcp 0 0 *:https *:* LISTEN - tcp 0 0 *:microsoft-ds *:* LISTEN 5621/smbd tcp 0 1 server1.torrentz2.o:www 213.158.194.228:6684 FIN_WAIT1 - tcp 0 0 server1.torrentz2.o:www server1.torrentz2:33496 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www server1.torrentz2:33467 TIME_WAIT - tcp 0 1 server1.torrentz2.o:www apn-77-112-37-6.g:16937 FIN_WAIT1 - tcp 0 0 server1.torrentz2.o:www multi.gnt.lv:1097 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www 125.18.239.135:41421 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www courage.london.02:35621 TIME_WAIT - tcp 22 0 server1.torrentz2:27015 server1.torrentz2:36123 CLOSE_WAIT - tcp 0 0 server1.torrentz2.o:www 213.158.194.228:20913 FIN_WAIT2 - tcp 0 0 server1.torrentz2.o:www 202.91.18.245:54264 TIME_WAIT - tcp 0 0 server1.torrentz2.o:www vc-196-207-33-198:32138 ESTABLISHED- tcp 0 0 server1.torrentz2.o:www vc-196-207-32-38.:24289 TIME_WAIT - vsftpd.conf: Code: ftp_username=root # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # # Run standalone? vsftpd can run either from an inetd or as a standalone # daemon started from an initscript. listen=YES # # Run standalone with IPv6? # Like the listen parameter, except vsftpd will listen on an IPv6 socket # instead of an IPv4 one. This parameter and the listen parameter are mutually # exclusive. listen_ipv6=NO # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=078 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # Activate logging of uploads/downloads. xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # You may override where the log file goes if you like. The default is shown # below. #xferlog_file=/var/log/vsftpd.log # # If you want, you can have your log file in standard ftpd xferlog format #xferlog_std_format=YES # # You may change the default value for timing out an idle session. idle_session_timeout=600 # # You may change the default value for timing out a data connection. data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Welcome to torrentz.lv FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. deny_email_enable=NO # (default follows) #banned_email_file=/etc/vsftpd.banned_emails # # You may restrict local users to their home directories. See the FAQ for # the possible risks in this before using chroot_local_user or # chroot_list_enable below. #chroot_local_user=YES # # You may specify an explicit list of local users to chroot() to their home chroot_local_user=NO # users to NOT chroot(). chroot_list_enable=NO # (default follows) #chroot_list_file=/etc/vsftpd.chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # # Debian customization # # Some of vsftpd's settings don't fit the Debian filesystem layout by # default. These settings are more Debian-friendly. # # This option should be the name of a directory which is empty. Also, the # directory should not be writable by the ftp user. This directory is used # as a secure chroot() jail at times vsftpd does not require filesystem # access. secure_chroot_dir=/var/run/vsftpd # # This string is the name of the PAM service vsftpd will use. pam_service_name=vsftpd # # This option specifies the location of the RSA certificate to use for SSL # encrypted connections. rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem # This option specifies the location of the RSA key to use for SSL # encrypted connections. rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key force_dot_files=NO #hide_file= #anon_max_rate= #local_max_rate= why I have vsftpd_127.0.0.1.conf and vsftpd_MY_EXTERNAL_IP.conf? my /etc/hosts: Code: 127.0.0.1 localhost.localdomain localhost 193.46.236.141 server1.torrentz2.oo.lv server1 # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback server1.torrentz2.oo.lv fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts When I try to CHMOD using PHP, I have error: permission denied (this file can be 644, 777, 660 but always the same error...)
Please set Code: local_umask=022 in your vsftpd.conf. I'd also set Code: chroot_local_user=YES because otherwise FTP users can browse all directories on the server.
